This is an authentic OEM sourced driver belt, not an aftermarket equivalent. It is specially designed for a variety of snow throwers. This is the main drive belt for the unit that will spin the augers. Please make sure to check appropriate diagrams for correct location and application of this item. It is made from durable rubber material and it is sold individually. You would need a set of wrenches to complete this repair.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Drive belt and drive spring for snow thrower.
Did not need belt yet but I am glad I got it. The drive spring went on without a problem. Good service and fast shipping.
Guest - November 27, 2019
Verified Purchase
★★★★★
★★★★★
Good quality parts
Parts came in great condition delivery was fast I'm very satisfied
Guest - December 4, 2019
Verified Purchase
★★★★★
★★★★★
Craftsman snowblower drive belt replacement.
Belt delivered on time and was a perfect fit.
Guest - December 5, 2019
Verified Purchase
★★★★★
★★★★★
Belt
It fit
Guest - November 6, 2020
Verified Purchase
★★★★★
★★★★★
Easy fix
Old belt came right off the way ereplacement parts instructions, much better than craftmans
Andrew - January 1, 2021
Verified Purchase
★★★★★
★★★★★
Fast shipment and arrival
Arrived in great condition/ packaging. Quick delivery.
Earl - January 11, 2021
Verified Purchase
★★★★★
★★★★★
snowblower belts
Fit fine seem to work ok.
Peter - January 11, 2021
Verified Purchase
★★★★★
★★★★★
Fast quick delivery
Got just what I ordered! I haven't had time to replace the belt yet, but Im sure with the helpful video on your site it will be a success! thank you
Guest - September 6, 2021
Verified Purchase
★★★★★
★★★★★
O.E Part, Great Prices, Fast Delivery
Everything arrived fast! All the parts were O.E. or equivalent. I was going to buy a new snowblower but replacing all the belts, cables and drive wheel it works like a new one again at a fraction of the price of a new one.
Guest - January 13, 2022
Verified Purchase
★★★★★
★★★★★
Traction Drive Belt
Right belt, arrived on time.
Guest - October 20, 2022
Verified Purchase
< Prev
1
2
3
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Replaced drive belt and auger drive belt. Replaced drive disc and tensioner spring and pulley. Snowblower 14 years old and all parts were original. Machine would stop driving forward into snow banks. Drive disc worn and drive belt loose. After repairs machine drives like new and all parts fit perfect. I was able to read machines ID label
... Read moreand order the exact right parts from the parts diagrams. I am a professional mechanic so for me it was easy.
Had to separate the auger housing to expose the belts after the belt cover was removed.
Used a half inch socket and wrench to break the machine apart.
I could not remove the old belts without breaking the machine apart.
I replaced the drive belt first,then I replaced the auger belt.
Putting the machine back togeth
... Read moreer was some what difficult in aligning the bolt holes up to reinstall the frame bolts.
Both belts were worn out and fell off, replaced belts and adjusted brake control and tension on the roller that pushes in the belt to tighten belt to operate the auger. Put covers back on. Everything is back to normal. Replaced worm bracket held on with 2 bolts and lock nuts.
Did you find this story helpful?
Thank you for voting!
Old belts melted onto the pully could not start the machine, news paper stuck in the auger
1. Remove the intake auger from the engine
2. Used a 3ft pipe wrench to turn the auger free
3. Remove the plate guides from the engine peel off the melted auger belt
4. Slip off the drive belt
5. Install new belts and plate guide
6. Change oil and spark plug
7. Reattached the auger intake to the eng
... Read moreine
Started on 2nd pull :)
I removed the cylinder head to perform a valve job,replaced the carburetor,replaced some cracked belts, lubed all moving parts and drive chains,change engine oil and check operation of everything. The unit is like new now!
Did you find this story helpful?
Thank you for voting!
Impeller shaft tension roll pins needed replaced
Kenneth from WERNERSVILLE, Pennsylvania
1 personfound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
seperate engine from auger assembly/shroud
remove auger drives from shroud by removing auger drive pulley from impeller shaft
remove broken tension roll pins and replace with new
reassemble auger assembly (installed new impeller bearing, key, bearing housing)
replaced auger drive belt while access was readily avail
... Read moreable
reattached auger assembly/shroud to engine
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_5.gif "Part Location Diagram of 1733324SM Murray Snow Blower Drive Belt")
_WW_5.gif "Part Location Diagram of 1733324SM Murray Snow Blower Drive Belt")
