Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Craftsman snowblower chute.
The part was correct and arrived as promised in great condition.
Guest - December 12, 2019
Verified Purchase
★★★★★
★★★★★
Great part
Easy fix, fit like original, speedy delivery, reasonable priced
Guest - December 18, 2019
Verified Purchase
★★★★★
★★★★★
Easy to replace after getting old part off.
Received item in 5 days came with no hardware but old hardware was salvageable.
Guest - December 29, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair fast service great
Heart did arrive quickly easy to put on
Guest - October 7, 2020
Verified Purchase
★★★★★
★★★★★
Was timely
Was correct part
Guest - October 12, 2020
Verified Purchase
★★★★★
★★★★★
great fit
arrived in a timely manner. part looks good
Guest - December 31, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair
Arrived quickly, even with a pandemic and the Holiday Season shipping overload. Had absolutely no issues with this replacement. Holes aligned excellently. It seems to fit even better than the original. Now I just need it to snow.
Guest - January 2, 2021
Verified Purchase
★★★★★
★★★★★
snowblower chute
part came in good condition, was what I expected,good service as usual
Guest - January 2, 2021
Verified Purchase
★★★★★
★★★★★
Easy repair,
Part worked great, arrived pn time!
Guest - January 14, 2021
Verified Purchase
★★★★★
★★★★★
Discharge chute - very easy repair
Removed old (broken) discharge chute. New chute fits perfectly. Website was easy to use. Probably saved money by DIY. Definitely recommend this site.
Guest - January 25, 2021
Verified Purchase
< Prev
1
2
3
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Replaced the chute! My snow blower is a 2005 model and I found the mounting holes on the
replacement chute were slightly off. I used a screwdriver through the holes to line up with the holes in the base and then force the bolts through the holes in the replacement chute.
If the oval holes were made longer in the replacemen
... Read moret chute, this problem would not occur.
I loosened three Bolts/nuts holding the base of the chute to the turntable on the machine, using a wrench and socket. What I\'m calling the turntable is the circular piece that rotates the chute to allow directional discharge of the snow using the \"turntable\" crank. Using the socket is a little tight and hard to fit inside of the chut
... Read moree. Luckily I have a \"mini\" socket set, which worked great. A pliers and wrench combination would work fine, but might take a bit longer.
Once the original chute was removed, I lined up the holes in the replacement chute to the turntable and inserted the bolts, washers and nuts. I initially left each rather loose in order to be able to make sure the chute was sitting evenly on the turntable. Then securely tightened each.
Then I removed the hardware from the original chute that allows you to adjust the angle/trajectory of the snow discharge ( two nuts, two washers, one bolt and one plastic turn knob. I installed those in the new chute, being careful not to over tighten the nut and bolt on one side in order to allow for ease of adjustment. It\'s important to make sure the bolt and nut are secure, though, so as to not lose them when operating the machine.
That\'s it. In all it took about 20 minutes, including searching for a wrench that fit. Very easy replacement.
Read less
Did you find this story helpful?
Thank you for voting!
Discharge chute was old and the bolt holes had ripped
1. Removed old chute
2. The replacement chute was not an exact match (the part had been discontinued-the snowblower is OLD), so I had to drill new holes for the bolts (the holes did not match exactly since it was not the exact part)
3 Bolted on new chute assembly
1. Removed mounting bolts and adjustable upper chute bolts and hand knob.
2. Reinstalled bolts in new lower chute and hand knob in upper adjustable chute.
3. New chute lower holes did no line up perfect but were acceptable. Placed side bolts in first
then the rear bolt which fit without enlarging holes.
Remove 3 bolts and nuts at the base of the chute and and removed the old chute.
Installed the chute with the bolts and nuts. Note: When you order new parts, order
new bolts and nuts
Did you find this story helpful?
Thank you for voting!
Old snowblower. All three lower chute parts were finally broken repair
Remove the four nuts & bolts from the chute & retainer rings (1/2\" socket). Remove the four nuts & bolts from chute collar (7/16\" socket). Set the outer chute retainer ring in place and reinstall the chute collar. Set the inner chute retainer ring in place and install the front retainer ring nut & bolt.
The only time I ran
... Read more into an issue was that when installing the lower chute, I tried starting with the center (rearmost nut & bolt) then installed the right nut & bolt. When it came time to install the left bolt, the hole in the chute didn\'t seem to reach the bolt. When installing the chute, I recommend installing the two outermost nuts & bolts and finally, the center (rearmost) nut & bolt. Once I switched to this method, I had no problems.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Deflector or Chute","title":"Deflector or Chute","url":"/parts/lawn-and-garden/snow-blower/deflectors-and-chutes/"},{"position":2,"name":"762222MA","title":"762222MA","url":""}]
(2008)_WW_4.gif "Part Location Diagram of 762222MA Murray Snow Blower Assembly Chute")
(2008)_WW_4.gif "Part Location Diagram of 762222MA Murray Snow Blower Assembly Chute")
