- This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
- New stock is on the way! On order parts usually ship within 7 business days.
- Item is not in stock and usually ships 10-15 business days from the time you place your order.
- This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
Wheel,friction 4.3 Ru 1501435MA
- Manufactured by:
- Murray
- ERP Number:
- ERP9263021
- Part Number:
- 1501435MA
Does this part fit my model?
Need help finding your model number?Jump to:
Product Description
?This is an original part from Craftsman for use with Craftsman Snowblowers. The fiction wheel assembly meshes with the friction disc, causing the drive wheel axle to turn. The most common reason for replacing the friction wheel is when the snowblower's wheels don't turn.This part is sold individually. Disconnect the spark plug wire before installing this part. The tools that you will need to replace the friction wheel disc are 3/8" socket, 9/16" socket, adjustable wrench, hammer, 1/2" socket, flat-head screwdriver, and lubrication.
Frequently Purchased Together
?Troubleshooting
- Drive system does not work
- Murray
- Briggs and Stratton
- Craftsman
- Snapper
- Simplicity
- Snow Blower
- 1501435MA
- 53830MA
- MT1501435MA
Customer Part Reviews
?- < Prev
- 1
- 2
- 3
- Next >
- < Prev
- 1
- 2
- 3
- Next >
Questions & Answers
?Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
- < Prev
- 1
- Next >
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Hi Dean, Thank you for your question. If your snowblower will not throw snow very far, there are some parts that you will need to check to see which one is causing the issue. You will need to check the belts, the assembly chute, the and the friction disc wheel. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
Hello Josh, Thank you for your inquiry. We show the friction wheel as part# 1501435MA, the friction wheel disc as part# 583163YZMA, the bearings as part# 334163MA and 1739282YP, and the shaft as part# 585855MA. We hope this helps.
Hi Shirley, Thank you for writing. We suggest checking for wear or damage to the Friction Wheel, Part Number: 1501435MA. The fiction wheel assembly meshes with the friction disc, causing the drive wheel axle to turn. We hope this helps!
Hello Terry, thank you for writing. We have researched the model you have provided and have found the part you are looking for is 1501435MA. We hope to hear from you soon.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- 2
- 3
- Next >
replace friction drive wheel on snowblower
Daniel from Mahopac, New York
- Difficulty Level:
- Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers, Socket set, Wrench set
- Parts Used:
- 1501435MA
Snowblower would not move forward or back.
Donald from Boyertown, Pennsylvania
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set, Wrench set
- Parts Used:
- 1501435MA
Snowblower drive weak
Richard from Dover, New Jersey
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers, Wrench set
Put in new friction wheel disc
Jeff from Lyons, Nebraska
- Difficulty Level:
- Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set, Wrench set
- Parts Used:
- 1501435MA
No forward drive
raymond from pascoag, Rhode Island
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Socket set
- Parts Used:
- 1501435MA
Tires were slipping.
Richard from HANOVER, Pennsylvania
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Socket set
- Parts Used:
- 1501435MA
Snow blower did not run and needed some mainline
Arlington from Allentown , Pennsylvania
- Difficulty Level:
- Easy
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
No drive on snowblower
Clark from ROGERS, Minnesota
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers, Socket set, Wrench set
- Parts Used:
- 1501435MA
2. Pull stater key.
3. Move throttle to stop.
4. Disconnect spark plug.
5. Put/ flip snow blower up on intake housing.
6. Remove bottom cover plate, wheels.
7. Remove bolts of drive shaft bearings (1 on each side, 2 bolts per side).
8. Remove right side support (by moving clip ... Read more and slide out.
9. Take picture of gear assembly for reference, then remove drive shaft with friction when disc. The washers for the shifter connection fall off, one for top one for bottom.
10. Remove old disk from drive shaft assembly (3 bolts).
11. Place new disk on drive shaft assembly.
12. Clean excess oil, dirt, grease form inside of housing. Insert drive shaft in place placing bearings with washers on the ends (held in place with low temp grease), CAREFULLY inserting the sprocket on drive shaft on driveshaft into drive chain. (This may be challenging.)
13. Reconnect shifter to friction disk assembly per your photo above. (This is a little tricky)
14. Insert and tighten bolts for shaft bearings. Rotate shaft as needed to check operation.
15. Replace wheels, LIGHTLY grease shaft, if needed.
16. LIGHTLY grease chains if needed. Remove any excess
17. IMPORTANT!!! Remove all grease on friction plate and disc with solvent.
18. Replace bottom plate, place in operating position.
19. Add fuel, attach spark plug wire, insert key.
20. Start and check function.
Snowblower wouldn\'t drive
David from Waterloo, Iowa
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers, Socket set, Wrench set
- Parts Used:
- 1501435MA
Friction disc was worn out
Sean from Roslyn, Washington
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set
- < Prev
- 1
- 2
- 3
- Next >
Model Cross Reference
Manufacturer Part Number: 1501435MA
| Brand | Model Number | Description |
|---|---|---|
| Snapper | 105308E | Snow Blower - 30" 10.5 Hp Two Stage Large Frame Snow Thrower Series 8 |
| Craftsman | 107889650 | Snow Blower - Snowblower |
| Murray | 1150-27 | Snow Blower - 27-Inch Snow Thrower, 11.5hp |
| Murray | 11527ES | Snow Blower - Murray 11.5tp 27-Inch Dual Stage Snowthrower |
| Snapper | 115328E | Snow Blower - 32" 11.5 Hp Two Stage Large Frame Snow Thrower Series 8 |
| Murray | 1227MD | Snow Blower - Bands 11.5 Gross Torque 27-Inch Dual Stage Snowthrower |
| Snapper | 1301695964 | Snow Blower - Gas Snowblower |
| Snapper | 130887280 | Snow Blower - Gas Snowblower |
| Snapper | 130887650 | Snow Blower - Gas Snowblower |
| Snapper | 130887660 | Snow Blower - Gas Snowblower |
| Snapper | 13088768 | Snow Blower - Gas Snowblower |
| Snapper | 130887740 | Snow Blower - Snow Thrower - 2011 |
| Murray | 14529ES | Snow Blower - 29-Inch Snow Thrower, 14.5hp |
| Simplicity | 1694984 | Snow Blower - L8565E, 8.5Hp 26In Snowthrower |
| Simplicity | 1694985 | Snow Blower - L9570E, 9.5Hp 28In Snowthrower |
| Simplicity | 1694986 | Snow Blower - L10575E, 10.5Hp 30In Snowthrow |
| Simplicity | 1694987 | Snow Blower - L11580E, 11.5Hp 32In Snowthrow |
| Snapper | 1694993 | Snow Blower - Snapper Snowblower Model 1694993 Parts |
| Snapper | 1694994 | Snow Blower - Snapper Snowblower Model 1694994 Parts |
| Snapper | 1694995 | Snow Blower - Snapper Snowblower Model 1694995 Parts |
| Snapper | 1694996 | Snow Blower - Snapper Snowblower Model 1694996 Parts |
| Murray | 1694997 | Snow Blower - 26" Dual Stage Snowthrower |
| Murray | 1694998 | Snow Blower - 28" Dual Stage Snowthrower |
| Murray | 1694999 | Snow Blower - 28" Dual Stage Snowthrower |
| Briggs and Stratton | 1694999-ST1028S | Snow Blower - 1694999 - St1028s, Dual Stage Snow Thrower (2006) |
| Murray | 1695000 | Snow Blower - 30" Dual Stage Snowthrower |
| Briggs and Stratton | 1695000-ST1130S | Snow Blower - 1695000 - St1130s, Dual Stage Snow Thrower (2006) |
| Murray | 1695053 | Snow Blower - 32" Dual Stage Snowthrower |
| Briggs and Stratton | 1695053-ST1332S | Snow Blower - 1695053 - St1332s, Dual Stage Snow Thrower (2006) |
| Murray | 1695070 | Snow Blower - 26" Dual Stage Snowthrower |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.