OEM Multi-Tool Parts Replacement Parts & Accessories

Carbon Brush Set – Part Number: 2610053746

$11.85

Manufacturer Part Number:: 2610053746

This is a manufacturer-sourced replacement carbon brush set designed for use with Dremel high-performance rotary tools. The set includes two carbon brushes and two metal springs, essential components that help maintain optimal motor performance. Carbon brushes are wear items that naturally degrade over time due to friction, and replacing them is a common and necessary part of tool maintenance. Thi...

Sleeve

★★★★★

(10)

$6.16

Manufacturer Part Number:: 692512002

This is a genuine OEM replacement part, it is sold individually. This is part of the clamp assembly that holds the accessories for the tools listed below. It is 3/4" in diameter,beveled in the center,with a 1/4" bore.

Carbon Brush

★★★★★

(5)

$9.11

Manufacturer Part Number:: CB458

Genuine Makita replacement part Set of 2 Carbon Brushes with wire lead attached. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through...

Collet

★★★★★

(10)

$9.04

Manufacturer Part Number:: 42-77-0400

This is a genuine Milwaukee Collet for using bits with 1/8-inch arbors. Due to prolonged, heavy use a collet may need to be replaced. Use Collet Nut Wrench Part Number: 45-96-0400 to remove the Collet Nut Part #: 44-40-0770.

Carbon Brush

★★★★★

(7)

$18.00

Manufacturer Part Number:: 30711129009

Genuine fein replacement part This brush is sold individually, 2 are needed for the tools shown below It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electric braking. Carbon brushes are one of the most ...

Brush & Spring Set

★★★★★

(16)

$11.85

Manufacturer Part Number:: 2610005646

This is a genuine Dremel replacement part. Sold as a pair. Brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush wil...

Foam Air Filter

★★★★★

(3)

$6.26

Manufacturer Part Number:: A226000740

This is an OEM sourced replacement part used on Shindaiwa trimmers. Its purpose is to filter out dust and debris from contaminating the carburetor and engine. When replacing the filter you can open the package in comes in and put a bit of two cycle oil in the bag and let it absorb into the filter. Then remove it from the bag and squeeze it with a paper towel to remove the excess oil. To replace ...

Motor

★★★★★

(8)

$28.68

Manufacturer Part Number:: 2610005460

It is a genuine item that is supplied directly from the original equipment manufacturer for Dremel cordless rotary tools. This is an identical replacement for a faulty or damaged motor that drives the shaft, please make sure to refer to the appropriate diagrams of your model for the correct location and installation of this part. Keep in mind this high-quality metal body motor is sold individually...

Carbon Brush Set

★★★★★

(27)

$11.76

Manufacturer Part Number:: 2610009829

This is a genuine OEM replacement part, it is sold as a set (2)Two Brushes and two Brush Springs. Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon bru...

Breather Assembly

★★★★★

(6)

$8.83

Manufacturer Part Number:: A356000040

This is a Genuine OEM sourced replacement part designed for use with Trimmers/Edgers. This breather acts as a valve for the fuel tank, it allows for the air to enter the fuel tank but it won't allow fuel or fuel emissions to leave the tank. It is made out of Plastic and it is Sold Individually. No special tools are needed to replace this Breather Assembly, simply connect it to the line.

Lock

★★★★★

(35)

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 2610009839

This is a Genuine replacement part designed for Dremel Rotary Tool. It helps to lock the the Spindle Shaft. It is Made out of Metal and it is Sold Individually. This Assembly includes a Collar and a Pin. To complete the repair you would need a Hex Key/Allen Wrench.