The 51765 Line Pawl is one part of the mechanism on the reel that guides the line back on to the spool. Its purpose is to keep the line from tangling on the spool. It insures that a flat and smooth spool of line will be ready for your next cast.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Order parts,got them,just what I ordered
SAN
Guest - May 14, 2019
Verified Purchase
★★★★★
★★★★★
“ABU”-parts
Awesome Company easy part look up in your catalogWasn’t expecting to get it as quick as I did thank you very much
Guest - May 17, 2019
Verified Purchase
★★★★★
★★★★★
Exact fit
I have ordered parts for multiple applications. Each, and every, time I received the part sooner than I expected. Packaged well and undamaged, every part was an exact fit. I will use Ereplacement Parts again. They have earned my trust with great customer service.
Guest - May 20, 2019
Verified Purchase
★★★★★
★★★★★
What I needed
Worked perfectly, went from a broke reel to one that's like brand new. Dont throw away your expensive reels ,fix them
Guest - May 22, 2019
Verified Purchase
★★★★★
★★★★★
Great service delivered.
Right part, my little ambassador 6500 works like new again.
Guest - June 1, 2019
Verified Purchase
★★★★★
★★★★★
Great service
Very good
Iglobal - June 27, 2019
Verified Purchase
★★★★★
★★★★★
Perfect replacement
The line guide pawls fit perfectly and my reels are back to working properly.
Guest - June 29, 2019
Verified Purchase
★★★★★
★★★★★
As always
Easy website to find the parts you need that got like they should
Guest - July 2, 2019
Verified Purchase
★★★★★
★★★★★
The percentage information about the part I needed was very helpful
Ordered part. Installed part. Easy work. Part fixed trouble. Good work
Guest - July 5, 2019
Verified Purchase
★★★★★
★★★★★
Great part, got it fast
Throwing big baits for stripers wears on my equipment more than normal. It's great to have a place to easily find the parts I need to my reels going strong.
Eddie - September 30, 2019
Verified Purchase
< Prev
1
2
3
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
START WITH A SCHEMATIC! Take the reel apart. Clean each part. Inspect for wear and damages. Photograph the sequence of removal. Replace the used, damaged, worn parts.
.
Did you find this story helpful?
Thank you for voting!
The level wind was getting stuck on one side of the reel. It would bounce back and forth off the one side when reeling, and I could only un stick it by putting pressure with my thumb on the level wind
I replaced the old pawl, which had no obvious damage, and now the reel works perfectly. At the bottom of the level wind there is a small round cap that unscrews. Remove this and take out the old pawl. Insert the new one while pushing down on it and turning the handle to make sure it seats property and replace the cap. Takes 1 minute.
1. Removed the side cover.
2. Slid the worm gear lock off.
3. Removed the line guide nut.
4. Removed the pawl.
5. Slid the worm gear out.
6. Slid in the new worm gear.
7. Put in the new pawl in the line guide.
8. Replaced the line guide nut.
9. Replaced the worm gear lock.
10. Replaced
... Read more the side cover.
Removed the cap holding the old part and replaced with new part. Took about one minute. Also replaced an internal broken part having to do with spool release and engagement. Original part was no longer available Was able to replace with the updated repair part. That took somewhat longer as it involved more extensive disassembly. Also cle
... Read moreaned and re-lubed other internal parts. All fit well and went well.
1) Unscrewed the cap that holds the line pawl in place.
2) Removed old line pawl and replaced with new one.
3) Replaced the cover
4) Replaced the missing brake knob
Removed pawl cap with standard screwdriver, removed and replaced pawl. Replaced
Pawl cap.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
