Genuine Abu Garcia replacement part, this item is sold individually. The purpose of this part, is when you are reeling in your line Size 5. It causes the line guide to oscillate back and forth so that the line is reeled back onto the spool evenly.
1. Removed the side cover.
2. Slid the worm gear lock off.
3. Removed the line guide nut.
4. Removed the pawl.
5. Slid the worm gear out.
6. Slid in the new worm gear.
7. Put in the new pawl in the line guide.
8. Replaced the line guide nut.
9. Replaced the worm gear lock.
10. Replaced
... Read more the side cover.
Read less
Did you find this story helpful?
Thank you for voting!
The worm shaft on my abu Garcia ambassador 5600 c4 failed, and needed to be replaced.
Took out the three screws on the side. Removed the clip holding the worm gear. Slid the worm gear out and slid the new one in. The new one fit just right and I was done in about 5 minutes.
Did you find this story helpful?
Thank you for voting!
When reeling in my real, my line no longer leveled
Removed Line Pawl screw cap
Removed Line pawl.
Remove side cover of real
Remove worm gear retainer
Slid out worm gear
Insert worm gear
Replace worm gear retainer
Replace side cover reel
Insert Line Pawl
Replace line Pawl screw cap
Did you find this story helpful?
Thank you for voting!
level wind on Ambassador 5000c stopped functioning
I had to remove defective worm gear and replace with new one. You do this by taking off the side panel that does not have the reel handle..3 tiny screws. Would be good to take photos of metal latch that holds the worm gear before removal as it is tricky to put back on. Also take pic of white plastic part at end of assembly so you do n
... Read moreot put new one in backwards. Originally I thought the pawl was worn out but replacing the pawl did not fix the malfunction..so I had to order a worm gear.
Read less
Did you find this story helpful?
Thank you for voting!
Worm shaft was chipped and wouldnGÇÖt make a return when cranking handle
Removed side cover and removed old worm shaft and replaced with new one,then unscrewed barrel nut on bottom of level line guide and removed broken ceramic guide pawl and replaced it with new steel guide pawl had carefully position it until it was in grooves of the new worm shaft, then screwed on barrel nut to secure guide pawl then lubed
... Read moreworm gear or worm shaft worked in by reeling.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
