This is a manufacturer approved replacement part designed for use with high wheeled trimmers. This carrier plate acts as a trimmer head/housing which secures the trimmer line. It is made out of metal and it is sold individually. Please note the locking plate/tab is sold separately. To complete this repair you would need a socket wrench to remove the bolt which holds the assembly to the jackshaft.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Great site for replacement parts
Second time I ordered parts for this
Tool, saved my mower again!!
Larry - April 30, 2019
Verified Purchase
★★★★★
★★★★★
Works, no issues
This replacement took under 20 minutes, it was harder to get the old part off.
Matthew - July 1, 2019
Verified Purchase
★★★★★
★★★★★
Fast, friendly and perfect part!
Arrived on time and in good shape. Seems to function as expected. It will get a full test tomorrow and if I don’t come back and change this assume it works as advertised!
Guest - July 14, 2019
Verified Purchase
★★★★★
★★★★★
worked as expected
was the part that I needed shipping could of been faster over all vary satisfied
Guest - August 17, 2019
Verified Purchase
★★★★★
★★★★★
Trimmer head
Was fast and easy. Fit like a glove
Guest - October 3, 2019
Verified Purchase
★★★★★
★★★★★
easy shipping and order
part in good shape
Guest - April 14, 2020
Verified Purchase
★★★★★
★★★★★
Easy to replace
Back in action.
Guest - June 20, 2020
Verified Purchase
★★★★★
★★★★★
easy repair when you have the right parts
Excellent!! Fit perfectly.
Guest - September 10, 2020
Verified Purchase
★★★★★
★★★★★
Tall grass mower
The right part delivery was fast and the right part. Thanks
Guest - October 7, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair and worked as expected
Fit perfectly
Charlie - September 18, 2021
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Unscrewed lower bumper
2. Slid off the lower bumper
3. Released and pulled off trimer line holder
4. Cleaned shaft
5. Installed spring and plate into holder
6. Slid on new holder
7. Screwed on lower bumper
Done!
The carrier plate broke and came apart. It was all made of plastic and the parts I ordered from eReplacementParts made it easy to repair it back to new again. I really think the parts that came to replace the broken pieces are made from better material then the parts from the factory when built.
Did you find this story helpful?
Thank you for voting!
The metal finger on the trimmer head broke and the bolt was rounded off.
First I drenched the shaft with penetrating oil, then in order to get the stripped bolt off I took a metal cutting wheel and cut a groove in bolt head and used a screwdriver to turn the bolt. I then used an adjustable wrench to hold drive shaft to take out the bolt. I pulled off and removed the spring and metal lock mechanism. I installed
... Read more the spring and lock mechanism in the new trimmer head. I put the head back on the shaft, then put on the new bolt.
1. Removed mower ball
2. Carrier would not budge from jackshaft ; applied penetrating oil around shaft.
3. Pushed in lock lever & tapped carrier to highest level.
4. Used fine sandpaper on shaft that extended past carrier to remove rust & pits
5. Pushed in lock lever & applied downward pressure ; carrier slipped of
... Read moref
6. Replaced carrier w/ eReplacement part, replaced Mower ball, replaced string, started trimmer & finished the job.
7. Thanks :)
Took out the old one.
Replaced it with the new one.
Placed my bearing and retainer clip on the new mow ball.
Adjusted carrier plate to proper height and replaced mow ball assembly.
Very easy to do, The parts ordered were just what I needed. They were here
in a timely manner. Very happy customer.
Patience, remove ball assembly. Sand shaft and wd40. Slide off plate and finish sanding shaft. Lube shaft with never- seize compound and assembly. Changed the ball assembly but keep the old one for future replacement. Keep a record and model number. Always move the adjustment height up and down to prevent rust build up on the shaft. If
... Read moreit is stuck, find time to free it or it will get worse.
The hardest part of replacing the trim cord plate assembly was cleaning dried grass and dirt to access screws.
After cleaning, remove the thin head bolt holding the foot on the bottom of the trimmer shaft. Clean around the shaft keeper that holds the trim cord plate assembly so you can slide the keeper away from the motor shaft whi
... Read morele pulling the plate assembly off of the trimmer shaft.
You might have to file off burrs on the shaft so the trimmer cord plate assembly slides easily off the shaft. Install the new assembly by reversing the above steps.
Cleaning parts make it easy to reinstall and consider buying a new shaft keeper and springs that hold the trimmer cord plate assembly to the shaft.
I cleaned all the dirt and dried grass residue off and it made reassembly pretty easy.
Read less
Did you find this story helpful?
Thank you for voting!
Could not adjust cut height because of damaged carrier plate
- removed old carrier plate assembly using wrench.
- removed spring and latch from old assembly.
- inserted the spring and latch into new head assembly and screwed in the nut that holds the assembly.
NOTE: Latch has to be inserted into head assembly through the slot on the flange in the assembly.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP17016616
Manufacturer Part Number: 594935003
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Bracket or Flange","title":"Bracket or Flange","url":"/parts/lawn-and-garden/trimmer/brackets-and-flanges/"},{"position":2,"name":"594935003","title":"594935003","url":""}]
(96173000500)_WW_1.gif "Part Location Diagram of 594935003 Husqvarna Carrier Plate")
(96173000500)_WW_1.gif "Part Location Diagram of 594935003 Husqvarna Carrier Plate")
