This is a genuine OEM replacement blade for use on Lawn Mowers. If the blade is too dull it will tear the grass instead of an even cut. A bent or damaged blade can cause serious damage or injuries. You can use this blade with the Recycler Cutting System to chop grass clippings into fine mulch particles and return them to the ground.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Great part, work as expected
I have ordered a couple of times from E Replacement Parts.com. Everything I have ordered has fit. Great place to get what you need and it's delivered right to your door. I will continue to use them.
Guest - May 28, 2020
Verified Purchase
★★★★★
★★★★★
No problems
Easy ordering process
Item was well packaged
Guest - June 12, 2020
Verified Purchase
★★★★★
★★★★★
Easy to replace
All ok as far as we knew
Guest - June 15, 2020
Verified Purchase
★★★★★
★★★★★
Mulching blade
Excellent communication and customer service. Took a little longer to receive due to the current situation in our country.
Ron - July 21, 2020
Verified Purchase
★★★★★
★★★★★
Selection is easy delivery is fast and attachment is one nut and way you go
Blades and all components arrived in good condition
Dunnshe could have been better
Box was 2/3rd empty so the contents rattled around but no damage if packaged materials
Guest - August 7, 2020
Verified Purchase
★★★★★
★★★★★
Do it yourself save money
The parts arrived in about a week easy repair runs like new again
Guest - September 8, 2020
Verified Purchase
★★★★★
★★★★★
Great part
Easy to replace
Francis - September 17, 2020
Verified Purchase
★★★★★
★★★★★
just in time
good part would have preferred a non mulching blade
Guest - October 13, 2020
Verified Purchase
★★★★★
★★★★★
Parts Lookup
Easy to use website to look up any replacement parts! Quick delivery! Perfect fit on everything I order!
Guest - April 7, 2021
Verified Purchase
★★★★★
★★★★★
Exact Replacement Part
Ordered the replacement lawnmower blade and got it in great time. This is an exact replacement and fit the mower perfect. Cut grass twice with it so far and cuts great.
Guest - May 11, 2021
Verified Purchase
< Prev
1
2
3
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Much easier to repair if you work with the mower deck on a workbench up where you can more easily get at both top and bottom of deck. Remove rear wheels and handle assembly. Remove bolts holding rear baffle. Install new baffle and reassemble. Mower working like new!
Then remove the blade bolt, blade support and the old blade. The
... Read moren install the new blade, the blade support and screw in the blade bolt.
Read less
Did you find this story helpful?
Thank you for voting!
I needed a new blade and the Bolt-Blade head was about rounded off.
Simply, unplug the spark plug, turn the mower over with the oil fill facing down. Put a block of wood by the blade to keep the blade from spinning. I used a 5/8 socket and took the Bolt-Blade nut off. Replaced the blade and squirted some oil on the Bolt-Blade as I tightened the bolt.
Did you find this story helpful?
Thank you for voting!
Lawn Mower cutting poorly and would not pull as belt was dry rotted.I had lost the old chute and tired of emptying the bagger every 40 feet.
Unbolted appropriate bolts holding belt cover and replaced belt. The guide is held on by two bolts and the belt cover on top of the mower is held by two screws from the bottom. You have to do all work from the bottom of the mower. So have something to lean the mower on so you can access bottom without emptying the gas and oil.
Did you find this story helpful?
Thank you for voting!
Lawn Mover Need Tune Up
JOY from Irving, Texas
10 of 10 peoplefound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Placed the mower on the work bench
Remove the blade bolt and blade support and blade
Removed the old belt and installed the new one
Installed the new blade with the blade support and blade bolt
Removed the air cleaner cover and cleaned it
Removed the old air filter and installed it and the cover
Removed
... Read more the old spark plug and gapped the new one at 0.030 and installed it
Replace the spark plug, gapped the new one at 0.030
Remove the air filter cover, remove the old filter and install the new one, replace the cover
Remove the blade bolt and the blade support, then the blade
Install the new blade in reverse order
Did you find this story helpful?
Thank you for voting!
Traction cable broke, and mower blade was due to be replaced.
1. Tipped the mower over and removed the blade nut note use a block of wood to hold blade steady. And the two cover plate mounting bolts to cable housing.
2. Install new blade using the same mower bolt. Don\'t forget to use the block of wood to hold blade steady.
3. Turn the mower right side up and install new cable. Run sprin
... Read moreg clip through housing and attach, and push black plastic clip through housing until it clicks into place. Run cable up through cable housing and run S clip into throttle housing. Note don\'t tighten cable until you have run cable through brackets and loop harness. Once installed you can tighten mounting bolt( my model has one bolt on the left hand side of mower handle bar that also holds the throttle lever)
4. Turn mower on it side again and install the two cover plate bolts from underneath and tighten. Total time for both installs 20 minutes.
One other note tip the mower on its side with gas tank facing up or you\'ll have a gas puddle on the ground.
1. Removed the old cable with needle nose pliers and socket wrench.
2. Attached new cable with socket wrench.
3. Removed old lawn mower blade with socket wrench.
4. Attached new lawn mower blade with socket wrench.
5. Attached new lawn mower chute by hand (no tools necessary).
Removed the bolt from the wheels and removed the wheels
Cleaned the axles and lubed them. then bolted on the new wheels
Remove the blade bolt and the blade support and the old blade
Installed the new blade on the shaft, then the blade support and blade bolt
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(2004)_WW_4.gif "Part Location Diagram of 131-4547-03 Toro Lawn Mower Mulching Blade (22-In)")
(2004)_WW_4.gif "Part Location Diagram of 131-4547-03 Toro Lawn Mower Mulching Blade (22-In)")
