It is a genuine OEM item that is made for Craftsman chainsaws. This is a special component which helps to provide a tight fit between connected parts. Over time it may wear out, get damaged or lost eventually requiring a replacement. Make sure to check the appropriate diagrams for your model to ensure the proper repair procedure. It consists of three durable metal parts.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Clutch washer kit
Worked great. Perfect replacement part.
Next time I need parts, I kn ou w where to get them!!
Guest - June 3, 2019
Verified Purchase
★★★★★
★★★★★
Good service
The right parts on time.
William - July 29, 2019
Verified Purchase
★★★★★
★★★★★
great parts fit like original
had it in 5 days fit right on works great
Guest - September 13, 2019
Verified Purchase
★★★★★
★★★★★
Worked as expected
A little difficult to get the clip on but part functioned as expect. I thought shipping cost were a little high for this part
Guest - October 29, 2019
Verified Purchase
★★★★★
★★★★★
Great part
The part arrived on scheduled and was easy to install,now my chainsaw works perfectly
Bruce - November 9, 2019
Verified Purchase
★★★★★
★★★★★
Exactly like origional
Easy to install, my chainsaw is working again
Kenneth - January 20, 2020
Verified Purchase
★★★★★
★★★★★
Perfect fit
The part was a perfect fit . Good quality, and price.
Tim - March 4, 2020
Verified Purchase
★★★★★
★★★★★
happy customer
order was easy and all part were on time and worked perfectly
Guest - May 15, 2020
Verified Purchase
★★★★★
★★★★★
The Exact Part I Needed and a Very Easy Repair
My Chainsaw popped out the little clip that holds the clutch washer and secures the chain. My work stopped. But then I did a quick search on eReplacement Parts and found my parts kit quickly and at a great price. The kit showed up in days and I was able to re-install it on my Chainsaw and I was back in business right away! Great service.
Guest - February 8, 2021
Verified Purchase
★★★★★
★★★★★
Fast Service
Parts arrived quick and the website was easy to navigate to find parts. Thanks
Guest - April 21, 2021
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed, cover and chain.
Removed c-clip retaining clutch drum and removed the drum.
Removed clutch assembly (left-hand threads !) by tapping it with the hammer and brass punch.
Removed the large clutch washer and replaced it with the new washer and clutch assembly.
Lubed the clutch drum bearing and installed the d
... Read morerum.
Re-installed the c-clip.
Ready for a new chain and cover.
1. I removed the bar by removing the 1/2 inch nuts holding the bar cover.
2. Using a screw-driver I removed the e-clip holding clutch washer, and removed the washer.
3. At this point, the clutch drum should pull off. Mine was quite sticky so I ended up using my channel-lock pliers to pull on the sprocket. I was replacing this
... Read moreanyway (sprocket is on clutch drum) so I wasn\'t worried about marring the sprocket.
4. Replaced the clutch drum. Placed a new clutch washer back on (old one was perfectly serviceable but decided if I was in there I would replace it). Put the new e-clip on - be careful here, it can go flying!
5. Since I had lost my bar adjust screw earlier I replaced it in the bar cover. Then I bolted down the bar cover.
Read less
Did you find this story helpful?
Thank you for voting!
Chain would not turn - the drive gear teeth were worn and needed replacing
Removed cover. Removed spark plug. Rotated piston just short of TDC. Inserted nylon rope into spark plug hole to stop piston from moving. Used a hammer and punch to unthread the clutch (clockwise - reverse threads). Threaded on new clutch and reinstalled new clutch housing, washers, etc. Reinstalled spark plug and cover.
I removed the spark plug and inserted cotton cord into cylinder, turned clutch clockwise until snug, then used a hammer and drift to loosen clutch, replaced with new parts.
Remove the clutch cover assembly. Then remove the c ring and washer. You now can remove the worn clutch drum. Replace all of the parts in reverse order. And you are done.
Remove the clutch cover, remove the chain from the sprocket. Then remove the c-clip from the shaft, and remove the larger washer, clutch drum and small washer behind it. Place the small washer on the shaft, then the clutch drum, the large washer and c-clip. Put the chain on the sprocket . Then install the clutch cover. Then adjust the cha
... Read morein to the correct tension.
1. Slacken chain tension.
2. Remove clutch cover, then chain and bar together.
3. Using flat-blade screwdriver, remove circlip from spindle groove.
4. Lift away washer.
5. Lift out Clutch Drum.
6. Slide new Clutch Drum onto spindle.
7. Slide new Clutch Washer onto spindle.
8. Using needle-nosed pl
... Read moreiers (or fingertips), slide new circlip into spindle groove.
9. Fit chain and bar.
10. Re-align chain tensioner (new, unworn part will make a difference in chain tension).
11. Carefully install cover, ensuring that chain tensioner lug is aligned with mating hole in cutting bar.
12. Install clutch cover.
13. Adjust chain.
Safety glasses on (you\'re working with a spring).
Removed old assembly. Installed per directions. Once the drum is on, you do need to move the lever, to seat the new brake assembly. Good idea to watch e-replacement\'s video, before you install.
1.Remove clutch cover.
2.Removed bar and chain.
3.Removed snap ring,washer kit, clutch drum.
4.Installed new parts.
Chainsaw working great like brand new.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP12636951
Manufacturer Part Number: 530071945
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
