( Grid squares measure 1x1 inch )

Vent Tube V471001201

Manufactured by:
Echo
ERP Number:
ERP16535460
Part Number:
V471001201
Original Equipment Manufacturer ?
  Works with your model  CS-303T!
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(56 rated repairs) ?
  Works with your model   CS-303T!

Product Description

?

The purpose of the vent tube is to allow air in to the fuel tank so that a vacuum is not created when the fuel is being fed through the fuel line. Most of the time the Vent line is connected to a fuel line grommet that is installed on the fuel tank. The fuel return line and the fuel line are also connected to the fuel line grommet. The other way a fuel tank is vented in other engines is by use of a fuel cap with a air vent built into it.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Echo
  • Shindaiwa
This part works with the following products:
  • Chainsaw
  • Leaf Blower / Vacuum
Part# V471001201 replaces these:
V471001201,

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(7 Reviews)
Click to filter by ratings:
  • 5 stars
    7
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(56 rated repairs) ?
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Gave my ECHO SRM-10 maintenance.

John from San Antonio, Texas

18 of 18 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
This maintenance was pretty straight forward. Replacing air filter and spark plug was easy. Instructions come with spark plug gap number so that you can adjust the gap yourself. Replaced fuel vent, filter and primer tubes which are easy removed and replaced. Replaced fuel filter, as it\'s attached to the end of a tube inside of fuel tank. You use a 4\" wire and form a hook on the end of it in order to pull out the tube from inside the fuel tank. It has the fuel filter attached to it. Simple replace. I replaced the rubber primer bulb. It\'s attached by 4 screws to carburetor and easy to access. Just remove the screws and plate, then remove old bulb and replace with new primer bulb and reattach screws. This all took about 30 minutes. Very easy. You just need screwdriver, spark plug socket and wire cutters to cut a piece of wire with. Use a coat hanger wire or any flexible wire that you can stick inside the fuel tank.
Did you find this story helpful?
Thank you for voting!

Primer bulb was leaking, Trimmer was difficult to start and ran rough. Fuel lines and fuel line grommet were soft and sticky.

Dennis from Paso Robles, California

12 of 12 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Removed fuel lines from air purge body assembly. Removed the purge bulb retainer. Removed fuel line grommet from fuel tank by prying out with a screw drive. Inserted new fuel line, fuel vent line, and fuel return lines in new fuel line grommet. Inserted new grommet with lines into fuel tank by carefully using a screw driver to push gr ommet into the opening. Then inserted fuel tank vent into the vent line. As a precaution, I changed out the air purge body assembly. Attached the fuel line and the fuel return line to the air purge body assembly. I had taken a photo of the connections before dis-assembly to be sure I got the lines back in the right places. Installed the new purge bulb and reinstalled the purge bulb retainer. Hedger now runs great.
Did you find this story helpful?
Thank you for voting!

2 hard to start trimmers

KURT from LIBERTYVILLE, Illinois

7 of 7 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
The Echo trimmer needs a fuel line grommet, the old one was cracked. The trouble shooting list on ereplacement web site clearly indicated this problem and solution. The new grommet solved the problem. For shipping cost, also order and replace vent tube and fuel tank vent.
The Toro trimmer had the same problem, but grommet is no lon ger available. Had to order a new fuel tank. I was happy that the new tank comes with fuel filter and fuel and vent tubing already installed permanently on the new tank. No grommet is needed in the new fuel tank. So the purchase price is a good value. Just plug the fuel and vent tubing to the engine, and it runs like new!
Did you find this story helpful?
Thank you for voting!

Gasoline leaking from grommet in fuel tank. Old tubes also well worn. Time to replace air filter and spark plug too.

Paul from Morgantown, Pennsylvania

5 of 5 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
1. Removed \"foot\" from the base of the motor.
2. Removed pull starter.
3. Removed fuel tank, all tubes, and grommet.
4. Replaced grommet, tubes, and filters.
5. Also replaced air filter and spark plug.
No more leaks and unit runs well!
Did you find this story helpful?
Thank you for voting!

Leaking gas from fuel tank. Tank grommet was especially worn from exposure to gas.

Jerome from New brunswick, New Jersey

4 of 4 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Removed the air filter to make getting at fuel tank grommet with ease. Pulled all hoses out from the grommet. Used needle nose pliers to get the grommet out. Greased all hoses and the grommet to make ease of replacement. The wire was used to pull the gas line out and the sculpting tool to press in the grommet.
Did you find this story helpful?
Thank you for voting!

Fuel tank grommet was leaking fuel

chuck from bloomington, Indiana

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Removed fuel from gas tank, removed fuel tank grommet and fuel lines. Installed new fuel lines in grommet; use a little lube on new lines going thru grommet, then put new grommet in fuel tank and attach fuel lines to carburetor.
Did you find this story helpful?
Thank you for voting!

Needed a general tune up and fuel was leaking from old lines and a small crack on top of tank

Clint from NEW BRAUNFELS, Texas

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Contacted small engine repair person that I normally use and got price on what repairs would cost. Then decided to do it myself. Found most of what I needed on the eReplacementParts.com website. A short phone call cleared up a couple of issues that I wasn\'t sure on. Parts (including a fuel tank that was ordered separately) arrived in about 3-4 days. All parts were genuine Echo OEM parts, which was important to me.

Used cordless drill with torx attachment, a screwdriver and needle nose pliers to remove fuel tank, old primer bulb and fuel lines pulled off easily with fingers. While everything was apart, used Chemtool spray carb cleaner to good old red shop rag to clean up seven years worth of grime.

Reassembly with new parts was easy and quick. The only thing I would recommend if you think you might not remember.....take a pic of how the fuel pipe, fuel tank vent and vent tube are setup....just so you know you\'ve got the right one in the right place. Very easy though.

My seven year old Echo looks almost new and runs like a top with the tune up and replacement parts. Will for sure order from these guys again.
Did you find this story helpful?
Thank you for voting!

trimmer would start but would stall.

BARBARA from Hamilton, Ohio

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
replaced all of the fuel lines, return line, filter,and tank grommet, trimmer runs good as new.
Did you find this story helpful?
Thank you for voting!

Gas tank seam was cracked and leaking

Edward from ELMA, New York

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Removed the gas tank and fuel lines from machine.
Installed all new parts on new gas tank, then mounted assembly to the edger , connected lines to carb.
FYI; Dish detergent helps when installing new fuel lines thru the rubber grommet, and getting the grommet installed in the gas tank
Did you find this story helpful?
Thank you for voting!

Trigger throttle was broken, all fuel lines frayed

Robert from Humble, Texas

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Removed the throttle trigger from handle, replace with new one, remember how the spring is attached. Removed fuel line grommet from tank. replaced both fuel lines and vent tube. Removed clip from fuel line and replace fuel filter, secured with clip. Installed grommet. Also replace the worn fuel cap and dented air filter cover
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2
  • 3

Model Cross Reference

This part works with the following models:
ERP Number: ERP16535460
Manufacturer Part Number: V471001201
Brand Model Number Description
Echo CS-303T Chainsaw - Chainsaw
Echo CS-3410 Chainsaw - Cs-3410 S/N: C93512001001 - C93512999999
Echo CS-3510 Chainsaw - Chainsaw
Echo CS-3520 Chainsaw - Cs-3520 S/N: C93429001001 - C93429999999
Shindaiwa EB212 Leaf Blower / Vacuum - Blowers Hand Held
Echo GT-22GES Trimmer - String Trimmer
Echo HC-152 Hedge Trimmer - Hedge Clipper
Echo SRM-22GES Trimmer - String Trimmer
Echo SV-5H Engine - O. E. M. Little Wonder (Sv)
Echo TC-210 Tiller - Tiller Cultivator