Medium
15-30 minutes
It is a genuine replacement part that is supplied directly from original equipment manufacturer for use with Nutone ceiling heaters. This is the main motor which drives the fan in the unit, over time components of an electric motor or bearings may develop issues eventually requiring replacement to maintain and quiet and efficient unit. Please note this high-quality item is sold individually.
Motor S89224000
OEM part for: Broan, Nutone
Part Number: S89224000
$119.57
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 16 machines
Nutone
9417 Ceiling Heater View Diagrams & Manuals
9417D Ceiling Heater View Diagrams & Manuals
9417DN Ceiling Heater View Diagrams & Manuals
9427 Ceiling Heater View Diagrams & Manuals
9427P Ceiling Heater View Diagrams & Manuals
VH9417 Ceiling Heater View Diagrams & Manuals
VH9417D Ceiling Heater View Diagrams & Manuals
VH9427P Ceiling Heater View Diagrams & Manuals
Broan
9427 Bulb Heater/Fan - 70 Cfm / 4.0 Sones View Diagrams & Manuals
9417DN Heat-A-Vent - 70 Cfm / 4.5 Sones View Diagrams & Manuals
9417D Heat-A-Vent - 70 Cfm / 4.5 Sones View Diagrams & Manuals
VH9427P Bulb Heater/Fan - 70 Cfm / 4.0 Sones View Diagrams & Manuals
VH9417D Heat-A-Vent - 70 Cfm / 4.5 Sones View Diagrams & Manuals
9417 Heat-A-Vent - 70 Cfm / 4.5 Sones View Diagrams & Manuals
VH9417 Heat-A-Vent - 70 Cfm / 4.5 Sones View Diagrams & Manuals
9427P Bulb Heater/Fan - 70 Cfm / 4.0 Sones View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Heater Parts
This part replaces obsolete part #: 89224000
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Easy repair đź‘Ť
Everything was good on time
Guest -
December 22, 2021
Verified Purchase
Repair part
Worked perfect and was delivered fast with excellent updates
Guest -
June 6, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Motor
Is this quieter than the original motor?
Tom
asked on 2022-12-16
Hello Tom, Thank you of writing. This motor is the same as the original and would produce the same amount of noise as the original. Thanks for the question!
eReplacementParts Team December 16, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Old motor burned out
MARK - January 12, 2017
👍 2 of 2 people found this instruction helpful
Tool Type
Heater
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Socket set
Parts Used
1. Removed bolts from old motor.
2. Unplugged motor from receptacle in box.
3. Removed bracket from old part and put on new motor.
4. Put motor into position in fan assembly.
5. Replaced bolts and plugged into receptacle.
2. Unplugged motor from receptacle in box.
3. Removed bracket from old part and put on new motor.
4. Put motor into position in fan assembly.
5. Replaced bolts and plugged into receptacle.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Not an heater! Original fan motor was dying.
Jeffrey - April 24, 2023
Tool Type
Heater
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, None
Parts Used
Removed old fan motor. Mounted new motor on the old bracket. Reinstalled it and plugged it in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The motor on my exhaust fan died. A new light/exhaust fixture would have required a drywall patch. I didn’t want to mess with that.
Kyrsten - October 3, 2021
Tool Type
Ventilation
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set
1. With a small socket I took off the nuts and washers that held the mounting bracket on the old motor.
2. Placed the new motor in the old bracket and refastened the washers and nuts, being careful to put the ground wire back in place under one of the nuts.
3. Attached new fan wheel to the motor.
4. Gently maneuvered the fan wheel into the duct.
5. Mounted the bracket back in the housing, loosely tightened the mounting screws.
6. Made small corrections to the whole assembly until the wheel no longer struck any part of the duct.
7. Tightened screws from the mounting bracket.
8. Plugged in the motor.
9. Success!
I read several reviews that stated the cord was too short to reach the electrical outlet inside the fixture. I did not have that problem. I was very relieved.
2. Placed the new motor in the old bracket and refastened the washers and nuts, being careful to put the ground wire back in place under one of the nuts.
3. Attached new fan wheel to the motor.
4. Gently maneuvered the fan wheel into the duct.
5. Mounted the bracket back in the housing, loosely tightened the mounting screws.
6. Made small corrections to the whole assembly until the wheel no longer struck any part of the duct.
7. Tightened screws from the mounting bracket.
8. Plugged in the motor.
9. Success!
I read several reviews that stated the cord was too short to reach the electrical outlet inside the fixture. I did not have that problem. I was very relieved.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
worn out fan motor
dan - March 18, 2019
Tool Type
Ventilation
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
remove old fan motor and wheel and replace with new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Exhaust fan motor stopped running
TERRY - February 21, 2019
Tool Type
Heater
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver
Parts Used
Replaced the motor with the exact motor required.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Excessive noise
Chuck - June 20, 2016
Tool Type
Ventilation
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Socket set
Fan motor with wheel replaced.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
