Medium
15-30 minutes
Dc Motor, Lxru02 629932-8
OEM part for: Makita
Part Number: 629932-8
$22.74
In Stock
Ships within 1 business day 
Compatibility
This Dc Motor, Lxru02 will fit the following 5 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Makita
This item works with the following types of products:
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
6
4 stars
2
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Fits like a glove
I replaced this motor now twice. Totaling 3 motors for the Makita weed eater that I use. Seems to only hold up for 1 season. Easy fix, because it just reconnects to the 2 wires. Runs like new again!
Kevin -
August 21, 2023
Verified Purchase
Very pleased
Not only was it the perfect part for my weed wacker. It came quickly and I’m now back to weed whacking. Thanks for the great service and having the part I needed at a reasonable price.
Diane -
August 22, 2022
Verified Purchase
Easy replacement motor
The motor was easy to replace and works like the original.
Bruno -
August 15, 2022
Verified Purchase
Right part first time fast shipping
Worked perfectly
Guest -
April 27, 2022
Verified Purchase
Easy repair. Appears to be OEM part.
Trimmer head shaft comes off with the tap of a hammer. Figuring that out was the biggest obstacle. Everything else was obvious.
Dan -
June 29, 2021
Verified Purchase
Exact part, fast shipping!
Works great, easy fix!
Guest -
July 12, 2019
Verified Purchase
Good quality part
Excellent part, easy to replace
Guest -
September 7, 2023
Verified Purchase
Great part.
Part time received as requested. Not give all five parts due to extremely high shipping cost!!!
iGlobal -
November 3, 2021
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Dc Motor, Lxru02
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
the motor would run for a second then cut out then not run again for a few minutes
NIall - May 3, 2024
Tool Type
Grass Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Removed the screws to take the shield off. The removed the screws from the casing and took it off. Disconnect the power from the old motor and replaced it with the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Motor was used to much
Kevin - August 20, 2023
Tool Type
Grass Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Power Drill
Parts Used
I unscrewed the housing to my Makita weedeater. Unhooked the negative and positive leads to the motor, took the motor out. I hooked the new motor up with both leads. Screwed the housing back together. It worked like new! These motors do not last but maybe half to 3/4 of the weedeating season.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Motor was used to much
Kevin - September 23, 2022
Tool Type
Grass Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Power Drill
Parts Used
I removed the necessary screws to get into the motor head and removed the assembly. Cut out the old motor fan so it could come out. Attached the new motor in the assembly and screwed it all back together. It's like I have a brand new weed eater again! Easy fix and affordable.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Motor was burnt up
Randy - May 16, 2022
Tool Type
Grass Trimmer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Nutdriver, Bench vise
Parts Used
Unscrew the case and split it open
The motor comes right out
I used 2 blade screw drivers and pried the gear off
Put the motor into a vise and slowly press the gear onto the new motor
Slip the motor back into the housing and screw it back together
The motor comes right out
I used 2 blade screw drivers and pried the gear off
Put the motor into a vise and slowly press the gear onto the new motor
Slip the motor back into the housing and screw it back together
Did you find this story helpful?
Thanks for voting and helping fellow customers!
DC motor burned out.
Dan - June 29, 2021
Tool Type
Grass Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Nutdriver
Parts Used
It's fairly straight forward.
Take the shell apart with a screw driver.
Take the motor assembly out and disconnect the wires.
I had trouble figuring out how to remove the trimmer head shaft from the motor assembly. I though it must be pressed on or held on by a clip. Not so. Just tap it with a hammer and it falls out. Figuring that out was the most difficult part of the job. Had I known how easy it was the whole job could have been completed in 15 minutes.
After that it goes back together the same way it came apart.
Be careful not to drop any of the little white plastic pieces. They appear to be vibration dampers.
Work over a bench or a table so nothing gets lost. It's actually an easy fix.
I burned my motor up because this unit is meant for small homeowner yards. I have 5 acres and was using it for an hour straight at a time and using it to trim brush. This single line model is not made for that. I have upgraded to the dual battery, dual line model and I'm giving this one to my son. It's a good machine, it's just intended for light work.
Take the shell apart with a screw driver.
Take the motor assembly out and disconnect the wires.
I had trouble figuring out how to remove the trimmer head shaft from the motor assembly. I though it must be pressed on or held on by a clip. Not so. Just tap it with a hammer and it falls out. Figuring that out was the most difficult part of the job. Had I known how easy it was the whole job could have been completed in 15 minutes.
After that it goes back together the same way it came apart.
Be careful not to drop any of the little white plastic pieces. They appear to be vibration dampers.
Work over a bench or a table so nothing gets lost. It's actually an easy fix.
I burned my motor up because this unit is meant for small homeowner yards. I have 5 acres and was using it for an hour straight at a time and using it to trim brush. This single line model is not made for that. I have upgraded to the dual battery, dual line model and I'm giving this one to my son. It's a good machine, it's just intended for light work.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
