Medium
15-30 minutes
It is an identical replacement for the damaged or a missing motor that was installed on a new unit. Check the part diagrams for your specific model to ensure the correct repair procedure. This high-quality motor is sold as an individual item. It is supplied by the original equipment manufacturer for Hitachi cordless driver drills. A screwdriver will be needed to replace this item.
Motor Dc12v 331333
OEM part for: Metabo HPT (Hitachi)
Part Number: 331333
$28.05
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Compatibility
This part will fit the following 2 machines
Metabo HPT (Hitachi)
DS10DFL Cordless Driver Drill View Diagrams & Manuals
DS10DFL2M 12v Peak 3/8 Inch Driver Drill, 1.5 Ah Li-Ion, 195 In/Lbs. Torque, 2 Batteries View Diagrams & Manuals
This item works with the following types of products:
- Cordless Drill Parts
- Drill Parts
Customer Part Reviews ?
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Motor Dc12v
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Motor smoking and gear loose
William - October 13, 2016
👍 2 of 2 people found this instruction helpful
Tool Type
Cordless Drill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Soldering iron
Parts Used
Remove screws holding handle together
Remove motor and gear assembly
Twisted motor off gear assembly
Unsoldered wires from motor
Soldered Wires onto new motor
Attached gear assembly
Put motor and gear assembly into one side of handle
Put on other side of handle
Screwed handle back together
Remove motor and gear assembly
Twisted motor off gear assembly
Unsoldered wires from motor
Soldered Wires onto new motor
Attached gear assembly
Put motor and gear assembly into one side of handle
Put on other side of handle
Screwed handle back together
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Motor was smoking and not running well
Herman - June 1, 2020
Tool Type
Cordless Drill
Difficulty
Medium
Time
15-30 minutes
Tools Used
, Soldering Iron
Parts Used
1 Removed cover on drill
2. Removed motor from transmission, make sure to turn to unlock
3. Unsoldered wires on motor
4. Soldered wires on new motor
5. Installed motor on transmission
6. Place assembly back in position, make sure to align tabs
7. Replace cover
2. Removed motor from transmission, make sure to turn to unlock
3. Unsoldered wires on motor
4. Soldered wires on new motor
5. Installed motor on transmission
6. Place assembly back in position, make sure to align tabs
7. Replace cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Motor burned up.
Richard - April 17, 2020
Tool Type
Cordless Drill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Soldering iron
Parts Used
Opened drill by removing screws holding two halves of drill together. Removed motor assembly and separated motor from gear assembly to access two power tabs. Unsoldered two leads from old motor and resoldered leads onto replacement motor. Reassembled drill and tested now working motor.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Motor burnt up
Lee - July 13, 2018
Tool Type
Cordless Drill
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Soldering iron
Parts Used
1. Removed all the screws holding the drill together
2. Separate the 2 parts of the shell
3. Remove the drill head assembly from the motor.
4. Remove the adaptor from the motor.
5. Unsolder the red & black wires on the motor
6. Solder the red & black wires to new motor.
7. Test
8. Screw the adaptor to the motor.
9. Install the drill head to the adaptor.
10. Install the assembly back in the drill half
11. Replace the other half of the shell
12.. Install all the screws in the shell .
13. Start drilling
2. Separate the 2 parts of the shell
3. Remove the drill head assembly from the motor.
4. Remove the adaptor from the motor.
5. Unsolder the red & black wires on the motor
6. Solder the red & black wires to new motor.
7. Test
8. Screw the adaptor to the motor.
9. Install the drill head to the adaptor.
10. Install the assembly back in the drill half
11. Replace the other half of the shell
12.. Install all the screws in the shell .
13. Start drilling
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
