Easy
Less than 15 minutes
This is an authentic replacement part manufactured for use with Dremel multi-tools. This is a complete motor and shaft assembly including the shaft bearing. The shaft supports the collet, collet nut, and locking pin that is used to secure the shaft when adjusting the collet. This part does not include the Collet or the Collet Nut and are sold separately. This motor assembly is sold individually.
Motor Assembly 2610919750
OEM part for: Dremel, Bosch
Part Number: 2610919750
$16.25
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 1 machine
Dremel
8000 (F013800002) 10.8v Cordless Rotary Tool Kit View Diagrams & Manuals
This item works with the following types of products:
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
7
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Fits Dremel 800
I have an older cordless Dremel 800. Like it a lot and use it a bunch. Have spare batteries for it, etc. So when it flat wore out, brushes worn down to almost nothing, I wanted to replace it rather than start over with a new model. Seriously, it was so worn out that I’d turn it on, nothing would happen, then I would start it spinning by hand, only then would it run! Problem was it’s so old that I could find nothing listed as a replacement motor. I found that the Dremel model 8000 has the same internal motor as the 800. Super easy swap. Repl motor has same spade terminals as the original. Back up and running good as new.
Guest -
June 18, 2022
Verified Purchase
Easy repair and a great product
Easy to install and equipment worked like new again, great product.
HERBERT -
November 9, 2021
Verified Purchase
Perfect match to OEM
Arrived quickly. Packaged very well.
Guest -
August 2, 2021
Verified Purchase
Great OEM part. Easy installation.
Great OEM part. Easy installation.
Guest -
May 25, 2021
Verified Purchase
Saved my bacon!
The motor assembly for my Dremel was shipped promptly. It was well packed and functioned perfectly.
At an acceptable price point, too!
Lorenzo -
January 11, 2021
Verified Purchase
Super
Très rapide et très bon service verry verry good service
iGlobal -
November 27, 2019
Verified Purchase
Great part, easy ordering, worked as expected
The part was in great condition, arrived quickly, and fit perfectly. Great job.
Guest -
July 3, 2019
Verified Purchase
Part fixed fast
Great part, about 1 month to receive was a bit long just coming from Oregon. Satisfied anyway.
Guest -
May 28, 2020
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Motor Assembly
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Couldn't unlock spindle
Charles - December 20, 2016
👍 3 of 3 people found this instruction helpful
Tool Type
MultiTool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Replaced motor assembly
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Lock on dremel tool stripped and could not release bit
George - July 14, 2016
👍 3 of 3 people found this instruction helpful
Tool Type
MultiTool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Wrench Set, Needle nose pliers
Parts Used
Removed and replaced motor (lock shaft was part of motor) and lock pin, spring by removing 4 screws from tool and two wires from motor. 10 min max
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Collet lock on motor shaft worn
David - March 21, 2017
👍 2 of 2 people found this instruction helpful
Tool Type
MultiTool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Torx Driver
Parts Used
Removed the tool body. Removed the motor assembly and replaced it with the new collet lock as well. Reassembled.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Dremel Drive shaft was severed
Nathan - February 23, 2016
👍 2 of 3 people found this instruction helpful
Tool Type
MultiTool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Motor/Shaft
1) Remove screws and plastic cover
2) Disconnect motor from Board
3) Open new motor
4) Connect motor to Board (if only drive shaft/motor, reassemble)
To add new lock
1) Remove screws and plastic cover
2) Remove Lock and Replace
3) Insert new spring
4) Reassemble
1) Remove screws and plastic cover
2) Disconnect motor from Board
3) Open new motor
4) Connect motor to Board (if only drive shaft/motor, reassemble)
To add new lock
1) Remove screws and plastic cover
2) Remove Lock and Replace
3) Insert new spring
4) Reassemble
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Motor shaft broke
Stan - January 18, 2023
Tool Type
Router
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Took out 6 torx screws, separated the case of the dremel, took out the motor and switch, transferred the switch to the now motor and reassembled it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Lock pin and receiving area for pin were worn.
Richard - December 28, 2022
Tool Type
Router
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
I opened the rotary tool, Removed motor and replaced it with the one i ordered here. It was very simple. i had ordered the new pin elsewhere. Worked perfectly. Fit perfectly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Motor wore out
dwight - December 23, 2021
Tool Type
Router
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Torch driver
Parts Used
Remove chuck area nut -remove 4 torch screws.
Separate dremel halves.
Remove motor and speed control remove 2 motor wires from speed control re-install with red to red dot Re-assemble. Super easy(1minute)
Separate dremel halves.
Remove motor and speed control remove 2 motor wires from speed control re-install with red to red dot Re-assemble. Super easy(1minute)
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Rotary tool motor burnt out
dwight - October 14, 2021
Tool Type
Router
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Small torch driver
Parts Used
Remove four torches screws : separate case : replace motor : re-assemble
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Armature shaft broke
Jeffery - March 25, 2021
Tool Type
Router
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, NONE
Parts Used
Wasn't a router. It was a Dremel. The armature shaft broke. Merely just took case apart and replaced it. New one runs great! Thanks!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Motor shaft broke
Vernon - July 8, 2020
Tool Type
Router
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Replaced motor and shaft and plugged in the circuit board and put housing together and works like a new tool. Tool is 10!+ years old.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
