Easy
15-30 minutes
Assembly Motor 230387001
OEM part for: Ryobi
Part Number: 230387001
$18.38
In Stock
Ships within 1 business day 
Compatibility
This Assembly Motor will fit the following 2 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Circular Saw Parts
- Saw Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Quick delivery and identical OEM part!
Part arrived fast and was a perfect fit--identical to one being replaced. Circular saw is like new again! Thank you.
Guest -
January 21, 2020
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Assembly Motor
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
After many years of service, motor started smoking and stopped
Alfredo - June 2, 2023
Tool Type
Circular Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, T20 screwdriver
Parts Used
1. Disassembled the Ryobi circular saw using T20 screwdriver. All screws are on the battery side. There are about 8 of them around the periphery and two on the motor cover. Removing the blade is not necessary but you'll need to raise and incline the base plate some for clearance purposes.
2. Unsolder or cut the leads to the motor. Note the orientation of the + and - terminal wires for reinstallation.
3. Unscrew the 4 Phillips screws holding the gear/motor assembly to the main body of the saw using a P2 screwdriver.
4. Unscrew the two screws holding the motor to the gear assembly using a P2 screwdriver.
5. Install the new motor into the gear assembly taking care of aligning the leads in the same orientation. Use blue thread locker (optional) for reassurance. You may replenish the general purpose grease if needed.
6. Solder the leads to the terminals in same orientation noted on step 2.
7. Reinstall the halve of the plastic body and screw back all the T20 screws.
8. Install a fully charge battery and run without load for about 1-2 minutes. Watch the orientation of the rotation and make sure is correct. If the cicrular saw spins backwards, check the polarity of the new motor. Also, watch for smoke, overheating, any burn smell or slowing of the RPMs. A little smoke may be ok but if it persist or there are clear indications of overheating, stop immediately and diagnose.
2. Unsolder or cut the leads to the motor. Note the orientation of the + and - terminal wires for reinstallation.
3. Unscrew the 4 Phillips screws holding the gear/motor assembly to the main body of the saw using a P2 screwdriver.
4. Unscrew the two screws holding the motor to the gear assembly using a P2 screwdriver.
5. Install the new motor into the gear assembly taking care of aligning the leads in the same orientation. Use blue thread locker (optional) for reassurance. You may replenish the general purpose grease if needed.
6. Solder the leads to the terminals in same orientation noted on step 2.
7. Reinstall the halve of the plastic body and screw back all the T20 screws.
8. Install a fully charge battery and run without load for about 1-2 minutes. Watch the orientation of the rotation and make sure is correct. If the cicrular saw spins backwards, check the polarity of the new motor. Also, watch for smoke, overheating, any burn smell or slowing of the RPMs. A little smoke may be ok but if it persist or there are clear indications of overheating, stop immediately and diagnose.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
my saw would not cut a 2 by 4 lainht wise blade would stop
mike - December 21, 2018
👍 0 of 1 people found this instruction helpful
Tool Type
Circular Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, allen wrenchs
Parts Used
took saw apart and replaced motor with your part vary simple,,,,,
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
