Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Demolition Hammer
- • Drill
- • Hammer Drill
Questions & Answers
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Demolition Hammer
Parts Used:
Repair Difficulty:
Expert
Time Spent Repairing:
30-60 minutes
Tools Used:
Socket set, Wrench Set, 1/2\\
Bolt broke off down in the casting
Drilled a hole in the broken bolt and tried to use an easy out which broke off in the hole. So then I mig welded a nut to the bolt and twisted it out with a 3/4" wrench. It took 3 tries before I got a strong enough weld to do the trick. If the casting hadn't been aluminum the welding trick probably wouldn't have worked. Put it all back together and it works as designed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Demolition Hammer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
Spring bolt broke
Put the disc spring on the bolt first then the spring, apply Loctite 222 on the bolt
Start threading them into the tool holder, alternating screwing them in
Start threading them into the tool holder, alternating screwing them in
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Demolition Hammer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
Normal wear and tear/broken bolt.
Removed and replaced the parts, due to wear
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Demolition Hammer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
One of the 3 bolts broke, leaving the stud in the housing.
1. Removed the other 2 bolts and the end housing.
2. Drilled out the stud.
3. Attempted to use an Easy-Out.
4. Used Liquid Wrench and let set 24 hrs
5. Heated with a Map gas torch.
6. Removed broken stud with an Easy-Out.
7. Reassembled with new bolt (that had thread sealent).
2. Drilled out the stud.
3. Attempted to use an Easy-Out.
4. Used Liquid Wrench and let set 24 hrs
5. Heated with a Map gas torch.
6. Removed broken stud with an Easy-Out.
7. Reassembled with new bolt (that had thread sealent).
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Microencapsulated Screw - ( 2914550034 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: Torgue Setting On Microencapsula...
steveg
when re-assembling jackhammer, what is the torque setting on microencapsulated screw?
Hello steveg,
When replacing the 2914550034 microencapsulated screw. The torque setting should be between 55-60 foot pounds.
-WJA
When replacing the 2914550034 microencapsulated screw. The torque setting should be between 55-60 foot pounds.
-WJA
