Easy
15-30 minutes
Genuine OEM replacement part used on Ariens snow blowers/throwers. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. It helps to secure skid shoe runner to the deck. Includes one (1) nut per order. Only use properly sized wrench when working with this item.
Nut-lk-ctr .38-16 Zc120 06500825
OEM part for: Ariens
Part Number: 06500825
$3.99
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Nut-lk-ctr .38-16 Zc120 will fit the following 2395 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Ariens
926335 (ST 28 DLET)(000101 & Above) Hydro Professional 28 Inch Track Snow Blower Briggs And Stratton
907254 (LM 21 SW)(000101 & Above) 21 Inch Self-Propelled Walk-Behind Mower 6.5hp Briggs And Stratton
Show More Compatible Models
This item works with the following types of products:
- Snowblower Parts
- Blower Parts
- Lawn Tractor Parts
- Lawn Mower Parts
- Trimmer Parts
- Engine Parts
- Vacuum Parts
This part replaces obsolete part #: 06509800, 06529600 (Models 101, 309), 06503900 (031, 028, 304, 305), 6529600, 6503900, 6509800, 02901500
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Nut-lk-ctr .38-16 Zc120
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Snow Blower Chute control gears were worn out
William - March 8, 2018
Tool Type
Snowblower
Difficulty
Medium
Time
15-30 minutes
Tools Used
Pliers, Socket set
Removed the 2 cover cap screws, and then removed the retaining pin from the chute gear. Then removed the lock nut from the bolt holding the pinion gear. I was then able to replace the chute gear, pinion gear, friction plate, compression spring, and all washers with new replacement parts. The job took about a 1/2 hour as I took my time and the chute now works like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Scraper blade was worn out
HARRY - October 3, 2017
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Wrench Set
Removed the old scraper blade and installed the new one. I needed 3 mounting bolts, 3 nuts and 3 washers to attach the scraper blade.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
I needed to replace the scraper bar & skid shoes
Herman - December 1, 2016
Tool Type
Snowblower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set
I used my socket set to remove the the scraper bar & skid shoes. Once I got the old pieces off I used my grinding tool to remove the excess dirt & paint that had chipped off. I then went out & bought paint primer & paint & went over the parts where the paint had peeled & where the rust started showing. I also replace some hardware items.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken Skid
David - March 21, 2019
👍 0 of 1 people found this instruction helpful
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Wrench Set, air Hammer small
Remove old skid replace with new Done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
