Easy
15-30 minutes
This is an authentic Bosch replacement part, sourced from the original manufacturer for use with drills. The chuck is used like a vise that firmly secures the drill bits. This item is available as an individual replacement part, please note the countersunk head screw that secures the chuck is available separately.
Keyless Chuck 2608572034
OEM part for: Bosch, Skil
Part Number: 2608572034
$87.15
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Product Description ?
- Ø 2-13 MM,1/2"
- Classification: Part
- Weight: 0.65 lbs.
- Shipping: Ships Worldwide
Compatibility
This part will fit the following 3 machines
Bosch
B6600 (0601141635) 1/2" Hammer Drill View Diagrams & Manuals
1141VSR (0601141639) 1/2" Hammer Drill View Diagrams & Manuals
Skil
HD6876 (Type 1)(0601141656) Percussion Drill View Diagrams & Manuals
This item works with the following types of products:
- Drill Parts
- Hammer Drill Parts
Repair Videos ?
Articles:
|
This article explains steps for how to remove threaded-on chucks and taper-fit drill chucks, as well as steps for removi...
September 18, 2009
|
|
Broken gearboxes and sticky chuck screws can make removing a drill chuck difficult. This article explains the tricks you...
August 12, 2010
|
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Keyless Chuck
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The Grommet on the Power Cord was broken and the Keyless Chuck Jaws were bad.
Don - February 28, 2019
Tool Type
Hammer Drill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
To replace the New Grommet I just had to unscrew all the screws holding the two halves of the Hammer Drill Case together, open the Bosch B6600 Hammer Drill Case, loosen the power cord screws, remove the cord with old broken grommet and replace the New Grommet on the old power cord. While I had the drill apart I went ahead and removed the old grease, cleaned everything well before putting new grease in the drill and putting it back together. Then I removed the old Keyless Chuck using a vise, which destroyed it but it had no screw holding it in place and had locktight on the main shaft of the drill to hold the Keyless Chuck in place. I then screwed the New Keyless Chuck on the main shaft of the drill, installed the New Chuck Screw (which is left-handed) and tighten it up to hold the New Chuck in place. That is all there was to repairing my Like-New Bosch B6600 Hammer Drill.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
