Medium
1-2 hours
Electric Range Surface Burner W10900107
OEM part for: GE, Whirlpool, KitchenAid, Hotpoint, Roper, Maytag, Admiral, Hardwick, Amana, Jenn-Air, Norge, Crosley, Magic Chef
Part Number: W10900107
$54.04
In Stock
Ships within 1 business day 
Compatibility
This Electric Range Surface Burner will fit the following 2588 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Whirlpool
GE
KitchenAid
Hotpoint
Roper
Maytag
Admiral
Hardwick
Amana
Jenn-Air
Norge
Crosley
Magic Chef
Show More Compatible ModelsThis item works with the following types of products:
- Dishwasher Parts
- Range Parts
- Oven Parts
- Cooktop Parts
- Microwave Parts
This part replaces obsolete part #: 301817, 74011409, 4391989, 4315579, WP74011409, WB21X5243
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Electric Range Surface Burner
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Temperature control switch for large element was "fried."
James - August 1, 2021
Tool Type
Range
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Vise grips, metal lathe, Dremel tool, terminal crimper
Parts Used
1. Removed old (defective) control. Note: Original replacement was unavailable. Range is an obsolete Whirlpool model.
2. Several modifications were necessary for installation of new "Infinite" switch (control.)
3. The proper included adapter was selected to allow use of original knob.
4. Said adapter required shortening (lathe) and the groove for the knob "key" required lengthening (Dremel Tool.}
5. The pre-scored shaft of the new control was shortened to proper length using Vise-Grips to support shaft near control end and pliers on the end to snap off.
6. It was necessary to modify two (user supplied) 1/4" long aluminum electronic spacers (lathe) to allow the switch control to be mounted deeper inside the range mounting panel. Two longer 8-32 screws were needed to complete this step. All this was required to set the knob the proper distance from the front surface of the range control panel.
7. Although the push-on terminal connections were in somewhat different locations on the new control switch, there was sufficient slack in the wiring to make the connections. The only issue encountered with the wiring connections was that the Pilot lamp terminal of the original control switch was a smaller size than the new control switch. An adapter was made from a short piece of appliance wire. The supplied large female terminal was crimped (terminal crimpers) on one end and the smaller male terminal (user provided) was crimped on the other end. The small terminal end was liberally insulated with electrical tape as that end connected to the original terminal now "dangling" in the air.
Results: Control switch is an excellent match with burner element. Stability of burner element temperature at any given setting is very good. Heat vs. switch position is very close to original obsolete control. A fair amount of time/effort but considering the cost of new ranges I feel it was well worth it.
2. Several modifications were necessary for installation of new "Infinite" switch (control.)
3. The proper included adapter was selected to allow use of original knob.
4. Said adapter required shortening (lathe) and the groove for the knob "key" required lengthening (Dremel Tool.}
5. The pre-scored shaft of the new control was shortened to proper length using Vise-Grips to support shaft near control end and pliers on the end to snap off.
6. It was necessary to modify two (user supplied) 1/4" long aluminum electronic spacers (lathe) to allow the switch control to be mounted deeper inside the range mounting panel. Two longer 8-32 screws were needed to complete this step. All this was required to set the knob the proper distance from the front surface of the range control panel.
7. Although the push-on terminal connections were in somewhat different locations on the new control switch, there was sufficient slack in the wiring to make the connections. The only issue encountered with the wiring connections was that the Pilot lamp terminal of the original control switch was a smaller size than the new control switch. An adapter was made from a short piece of appliance wire. The supplied large female terminal was crimped (terminal crimpers) on one end and the smaller male terminal (user provided) was crimped on the other end. The small terminal end was liberally insulated with electrical tape as that end connected to the original terminal now "dangling" in the air.
Results: Control switch is an excellent match with burner element. Stability of burner element temperature at any given setting is very good. Heat vs. switch position is very close to original obsolete control. A fair amount of time/effort but considering the cost of new ranges I feel it was well worth it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
