Grid squares measure 1x1 inch

Watch The
Repair Video

Ignition Module

Part Number: 69848

Date Available: Unknown

Questions & Answers

Repair Instructions

Product Information

Manufacturer: Weber

Product Number: 69848

Classification: Part

Weight: 0.49 lbs.

Shipping: Ships Worldwide

Warning: California's Proposition 65

Compatibility

This part is compatible with the following machines:

Weber

46510001 Spirit E-310, Lp, Blk, Gas Grill
47510001 Spirtit E-310, Ng, Blk, Gas Grill
46100001 (2013)(LP) Spirit S-210 Grill
46110001 (2013)(LP) Spirit E-210 Grill
46113101 (2014)(LP) Spirit E-210 Grill w/Gbs/Griddle
47100001 (2013)(NG) Spirit S-210 Grill
46513101 (2014)(LP) Spirit E-310 w/Gbs/Griddle
47513101 (2014)(NG) Spirit E-310 w/Gbs/Griddle
46500401 (2013) Spirit Sp-310 Lp Ss (Us/Ca/Mx)

SPIRIT E-215 Spirit E-215
GENESIS E-310 (2007-2010 Models) Genesis E-310
46513101 (2014) Spirit E-310 Lp Blk W/Gbs/Griddle
46410674 (2013) Spirit E-310 Original Lp
47112001 Grill
46113101 (2014) Spirit E-210 Lp Blk W/Gbs/Griddle
46100001 (2013) Spirit S-210 Lp Ss
GENESIS SPIRIT S-210 Genesis Spirit S-210
46112001 Spirit E-215 Gas Grill

Expand the 18 compatible machines

Questions & Answers

Sort by

No questions have been asked yet

Repair Instructions: Submitted by Customers Like You

Tool Type:

Outdoor Grill

Parts Used:

Ignition Module - 69848

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

grill would not ignite

Removed the ignition module and wiring with the aid of a screwdriver. A new module was installed with minimum effort. The project went well and the grill is now working correctly.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 2 people found this instruction helpful

Tool Type:

Outdoor Grill

Parts Used:

Ignition Module - 69848

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Ignition cap cracked.

Right now just replaced the broken cap.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

0 of 1 people found this instruction helpful

Tool Type:

Outdoor Grill

Parts Used:

Ignition Module - 69848

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver

Ignitor had failed

1. Removed old ignitor Module by removing 2 Philips screws.
2. Unplug the 4 wires one at a time and plug into the new module as you remove.
3. Remount module with the two new screws.
4. Install the new battery.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

0 of 1 people found this instruction helpful

Tool Type:

Outdoor Grill

Parts Used:

Ignition Module - 69848

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Bad ignition module

Remove 2 Philips head screws that hold unit to grill. Then remove the four wire plugs and install on the new module in the same order they were removed. Install module with the two new Phillips head screws provided. Turn propane gas tank off , then test unit .You should here the spark. If you hear the spark, you can turn the gas on and light the grill.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Product Information

Manufacturer: Weber

Product Number: 69848

Classification: Part

Weight: 0.49 lbs.

Shipping: Ships Worldwide

Repair Guides