Medium
15-30 minutes
Hex Head Bolt (left Thread) JWBS14OS-147
OEM part for: Jet
Part Number: JWBS14OS-147
$5.15
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Compatibility
This part will fit the following 1 machine
Jet
JWBS-14OS (708113A) 14-inch Woodworking Band Saw View Diagrams & Manuals
This item works with the following types of products:
- Band Saw Parts
- Saw Parts
This part replaces obsolete part #: jwbs140s-147
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Hex Head Bolt (left Thread)
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
My blade would not track correctly, and I found the drive wheel missing the key and screw to secure it.
Steve - June 14, 2017
Tool Type
Band Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set, Metric wrench or adjustable
The drive wheel key and left hand screw were missing, so the blade was not stable and would not track well.
I removed the lower (driven) wheel and pushed the key into the keyway. Then I reinstalled the wheel and screwed in the left hand bolt and tightened it down.
I should have also purchased the washer (even though I felt it was REALLY overpriced for a washer) because it is not simply an 8mm washer... it is 8mm ID and extra wide OD to span the opening in the wheel to hold the wheel onto the shaft. I was lucky to have a washer that fit, otherwise I would have been running out to the store hoping to find what I needed! Buy the washer!
Overall a very easy repair and my saw is running great again.
I removed the lower (driven) wheel and pushed the key into the keyway. Then I reinstalled the wheel and screwed in the left hand bolt and tightened it down.
I should have also purchased the washer (even though I felt it was REALLY overpriced for a washer) because it is not simply an 8mm washer... it is 8mm ID and extra wide OD to span the opening in the wheel to hold the wheel onto the shaft. I was lucky to have a washer that fit, otherwise I would have been running out to the store hoping to find what I needed! Buy the washer!
Overall a very easy repair and my saw is running great again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The key in the shaft for the wheel was driven into the race of the bearing causing the race to spin on the lower shaft.
Chris - July 29, 2016
Tool Type
Band Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Wrench Set, allen wrench, hammer, large punch
Removed the blade.
Used the hammer and punch the push the old lower shaft out of saw.
Put wheel with shaft into vice to knock out shaft from wheel.
Removed bearing from shaft.
Put bearing on new shaft, put both in saw,added key.
Put on wheel and bolt.
Raplaced blade and tightened
Used the hammer and punch the push the old lower shaft out of saw.
Put wheel with shaft into vice to knock out shaft from wheel.
Removed bearing from shaft.
Put bearing on new shaft, put both in saw,added key.
Put on wheel and bolt.
Raplaced blade and tightened
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
