Easy
15-30 minutes
This is an authentic OEM supplied replacement part that is specially made for use with Char-Broil gas grills. The heat tent is secured over the burner for the purpose of directing grease and drippings away from the burner tubes. This will help to cut down on flare-ups tremendously, an extra benefit of these tents is that they help to add that “cooked on a grill” flavor to your food. Tents tend to rust due to the combination of heat and moisture, it is recommended after each use to let the parts cool down and wash them with warm water and soap. This item is made of durable steel and it is sold individually.
Heat Tent G210-0003-W1
OEM part for: Char-Broil
Part Number: G210-0003-W1
$13.82
In Stock
Order within the next 11 hours and your part ships today! 
Compatibility
This part will fit the following 7 machines
Char-Broil
463611809 2 Burner Sears Gas Grill View Diagrams & Manuals
463612009 Gas Grill View Diagrams & Manuals
463620207 Gas Grill View Diagrams & Manuals
463620208 (2008) Gas Grill View Diagrams & Manuals
415.16120901 2-Burner Lp Gas Outdoor Bbq Grill View Diagrams & Manuals
463612010 Two-Burner Gas Grill View Diagrams & Manuals
463620208 Gas Grill View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
This part replaces obsolete part #: 80009721
Repair Videos ?
Articles:
|
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Perfect part
My replacement part came so quick. Delivered to my door in perfect condition and fit perfectly.
Great price and quick delivery and we are back to the Barbq!!
Guest -
August 14, 2020
Verified Purchase
Replacement parts
Fast shipping and parts are perfect. Website is easy with great, explicit descriptions. Also, the prices are good!
Guest -
February 25, 2020
Verified Purchase
Part was what I expected.
The part was what I expected. Was easy to install. No surprises . The only disappointment I had was the cost of shipping. It was 2 dollars more than The price of the part. took over a week to receive it.
Guest -
September 4, 2021
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Heat Tent
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
heat tent had rusted through
David - September 4, 2021
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
Removed grille grates. Removed rusted heat tent. The pins that hold up the tent had rusted away as well. Knocked them out with a hammer and replaced them with 1/4 inch bolts, nuts and some flat washers. Dropped in new heat tent, replaced the grates, job done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The original heat tent had rusted out. Rather than buy a new grill, I simply replaced the heat tent with the one purchased here.
Barry - October 18, 2018
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, none
Parts Used
Threw out the old part and inserted the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Burner and heat tent rusted out
Steve - July 6, 2017
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Removed the old parts and installed the new ones.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Burner assembly rusted and corroded and completely disintegrated. Heat tent corroded as well and lit on fire during last use due to caked on grease and food.
Jordan - May 30, 2017
Tool Type
Outdoor Grill
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set
1. Disconnected and removed Propane cylinder.
2. Removed burner knobs and front panel assembly by removing top screws of each side table attachment
3. Unscrewed and unhooked old burner assembly and disposed of.
4. Unscrewed igniter and then old igniter electrode.
5. Hooked igniter to new igniter electrode and thread through front panel opening. Screw igniter back to panel.
6. Adjust new burner assembly and be sure has valves are inside new burner tubes.
7. Ensure all screws are replaced and tight enough.
8. Spray entire propane connections, tubes, and hoses with soapy water. Turn on Propane and spot any leaks. Tighten as necessary.
8. Test new and improved burners!
2. Removed burner knobs and front panel assembly by removing top screws of each side table attachment
3. Unscrewed and unhooked old burner assembly and disposed of.
4. Unscrewed igniter and then old igniter electrode.
5. Hooked igniter to new igniter electrode and thread through front panel opening. Screw igniter back to panel.
6. Adjust new burner assembly and be sure has valves are inside new burner tubes.
7. Ensure all screws are replaced and tight enough.
8. Spray entire propane connections, tubes, and hoses with soapy water. Turn on Propane and spot any leaks. Tighten as necessary.
8. Test new and improved burners!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
