Medium
1-2 hours
It is a genuine OEM supplied part that is made for use with Milwaukee compact band saws. This is a high-quality replacement for a damaged or a missing handle kit that was installed on a new tool. To ensure the proper replacement procedure, refer to the diagrams for your specific model. A screwdriver and pliers might be needed to perform this repair. Keep in mind this high-quality handle kit is made of durable plastic and is sold as an individual item.
Handle Kit 31-44-0305
OEM part for: Milwaukee
Part Number: 31-44-0305
$21.97
In Stock
Order within the next 5 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 1 machine
Milwaukee
2629-20 (SER C14A) Cordless 18V Compact Band Saw View Diagrams & Manuals
This item works with the following types of products:
- Band Saw Parts
- Saw Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Handle Kit
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Saw kept ejecting blade, general cosmetic
Kyle - November 25, 2019
Tool Type
Band Saw
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Power Drill, Master hex/torx index
Parts Used
- Front Handle - 31-44-0095
- Pulley Tire - 45-69-0030
- Bumper Spring - 40-50-0655
- Brush Card Assembly - 14-46-2016
- Handle Kit - 31-44-0305
- Motor Cover Assembly - 31-15-0205
- Rear Pulley - 44-77-0170
- Front Pulley Assembly - 28-95-0030
- Bumper - 42-38-0135
- Service Nameplate Kit - 12-20-2629
- Housing Assembly - N413423
I started with a complete disassembly of m18 compact bandsaw. Cleaned all metal parts with a brass wire wheel, removing all rust and factory lubricants. I used an air nozzle to blast dust out of the crevices then Re surfaced the plastic deck using brass wire wheel at low rpm.
Replacing the brush card was the most difficult task for me. I wasn't paying close enough attention to the brush card orientation and wound up re installing in reverse, the site schematics were very vague and blurry for this part, it seemed to fit perfectly. (Turns out band saws will operate in a reverse order if the polarity is altered.) After a quick re re installation of service armature, field, and brush card I re assembled using new and refurbished parts, applied quality bearing assembly lubricants and nuclear grade anti sieze. I then polished aluminum gearcase with brass wire wheel. Since paint of Milwaukee emblems were removed, I added custom black paint for the once red factory logos, added the owners company logos, as well as my insignia. The resto was a success and customer was very satisfied with the performance and aesthetics.
Replacing the brush card was the most difficult task for me. I wasn't paying close enough attention to the brush card orientation and wound up re installing in reverse, the site schematics were very vague and blurry for this part, it seemed to fit perfectly. (Turns out band saws will operate in a reverse order if the polarity is altered.) After a quick re re installation of service armature, field, and brush card I re assembled using new and refurbished parts, applied quality bearing assembly lubricants and nuclear grade anti sieze. I then polished aluminum gearcase with brass wire wheel. Since paint of Milwaukee emblems were removed, I added custom black paint for the once red factory logos, added the owners company logos, as well as my insignia. The resto was a success and customer was very satisfied with the performance and aesthetics.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken handle
Lukasz - February 15, 2017
Tool Type
Band Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver
Parts Used
Remove the screws from the broken handle and separate
Take a picture of where all the parts are located
Install the parts in the new handle assembly as they were in the old broken one
Assemble the new handles
Take a picture of where all the parts are located
Install the parts in the new handle assembly as they were in the old broken one
Assemble the new handles
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
