Handle Grip

Slit the old grip with my pocketknife cleaned the handle bar put a small amount of liquid soap on the handlebar slid the new grip on and left it set overnight, good to go.

1. Remove Carb assembly.
2. Lay out on a white towel with a shop light over head. The parts are hard to see.
3. Take detailed pics of carb disassembly. and lay parts out in order.
4. Spray carb cleaner in all jets. If its bad soak overnight in ultra sonic cleaner. You can get one from your local discount tool seller for $80.00 well worth the money.
5. Put back to together.
6. Follow manufactures adjustment procedure. If you have good compression and spark it will fire right up.
7. Only use non-ethanol gas premix. Trust me my equipment starts year after year after a good rebuild and only using premix going forward. Your carb diaphragms will last many season vs one. and 2 or 3 pulls to start.