Easy
1-2 hours
This is a genuine replacement part manufactured for use with small engines that are commonly installed on riding lawnmowers. The gasket fits into the crankcase and is used to seal the oil fill tube. This gasket is available as an individual replacement part.
Gasket 37610
OEM part for: Tecumseh, Husqvarna, Toro
Part Number: 37610
$4.99
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Gasket will fit the following 982 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Engine Parts
- Lawn Mower Parts
This part replaces obsolete part #: 36996
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Gasket
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Oil fill tube broke
Heath - June 29, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Lawn Mower
Difficulty
Easy
Time
More than 2 hours
Tools Used
Nutdriver
Parts Used
Remove the screw from the broken oil tube and remove it.
Install the gasket and o-ring on the new tube and screw it in.
Install the gasket and o-ring on the new tube and screw it in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cracked oil fill tube
William - April 30, 2024
Tool Type
Engine
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Wrench Set
Parts Used
1Removed top cover.
2 Cleaned area around the dip stick oil tube.
3 Removed the cracked oil tube.
4 Cleaned oil fill hole, and checked to make sure there were no damage to the housing.
5 Installed gasket and applied a coat of clean oil.
6 Installed new dip stick tube.
7 Cleaned debris from cooling fins, and replaced top cover.
8 Filled engine with oil recommended for that model.
9 Started and ran engine until warm.
10 Checked for leaks and there were none.
11 Ready to cut grass.
2 Cleaned area around the dip stick oil tube.
3 Removed the cracked oil tube.
4 Cleaned oil fill hole, and checked to make sure there were no damage to the housing.
5 Installed gasket and applied a coat of clean oil.
6 Installed new dip stick tube.
7 Cleaned debris from cooling fins, and replaced top cover.
8 Filled engine with oil recommended for that model.
9 Started and ran engine until warm.
10 Checked for leaks and there were none.
11 Ready to cut grass.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
blade was leaving grass...Blade adaptor key was worn,,,,Also replaced drove belt
David - May 29, 2019
Tool Type
Lawn Mower
Difficulty
Easy
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Power Drill, Socket set, Wrench Set, Nutdriver
Great...
Blade adaptor key was worn,,,Replace with new blade Adapter. Spacer was ordered separately .,Also replaced drive belt.
Parts fit perfectly.
Blade adaptor key was worn,,,Replace with new blade Adapter. Spacer was ordered separately .,Also replaced drive belt.
Parts fit perfectly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
No power, engine ran rough.
John - October 2, 2018
Tool Type
Lawn Mower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, Wrench Set
Replaced starter recoil
Replaced spark plug
Replaced air filter
Cleaned carb
Changed oil
Replaced oil fill tube and dipstick and used new gaskets
It was not a difficult job. Any DIY person could figure it out fairly easily. All the parts are easy to get to and not too complicated to remove or replace.
Replaced spark plug
Replaced air filter
Cleaned carb
Changed oil
Replaced oil fill tube and dipstick and used new gaskets
It was not a difficult job. Any DIY person could figure it out fairly easily. All the parts are easy to get to and not too complicated to remove or replace.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
