Medium
1-2 hours
Field 18-30-1700
OEM part for: Milwaukee
Part Number: 18-30-1700
$49.52
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Compatibility
This part will fit the following 12 machines
Milwaukee
6520-21 (SER B02A) 1-1/8" Stroke Sawzall View Diagrams & Manuals
6520-21 (SER B02B) 1-1/8" Stroke Sawzall View Diagrams & Manuals
6523-21 (SER A65A) Sawzall View Diagrams & Manuals
6523-21 (SER A65B) Sawzall View Diagrams & Manuals
6523-21 (SER A65C) Sawzall View Diagrams & Manuals
6523-21 (SER A65D) Sawzall View Diagrams & Manuals
6536-21 (SER A66A) 1-1/4" Stroke Sawzall View Diagrams & Manuals
6536-21 (SER A66B) 1-1/4" Stroke Sawzall View Diagrams & Manuals
6536-21 (SER A66C) 1-1/4" Stroke Sawzall View Diagrams & Manuals
6536-21 (SER A66D) 1-1/4" Stroke Sawzall View Diagrams & Manuals
6520-21 (SER B02C) 12 Amp Orbital Sawzall Recip Saw View Diagrams & Manuals
6536-21 (A66E) 1-1/4" Stroke Sawzall View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Saw Parts
Repair Videos ?
Articles:
|
This article defines the basic parts of most power tools, explains how they work, and what to look for when they stop wo...
September 25, 2009
|
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Field
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Tool was sparking, smoking and quit
Kirtland - May 29, 2016
Tool Type
Reciprocating Saw
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers
Parts Used
Took the Milwaukee 6538-21 completely apart. It was difficult to get the armature out, because when the field shorted out, it melted the insulation towards the center, I drove the armature out with a piece of wood and hammer, fortunately it did not damage the armature, in the process. Other than getting the armature out, taking the rubber boot on and off was a challenge and took some help, otherwise the repair was straight forward. The saw did not have that many hours on it, I suspect running it on low speed too long, was the cause of overheating. I was grateful to repair a $200 dollar saw for $35.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The field burnt up and damaged the motor housing, brushes, and remote electronic assembly.
Joel - April 4, 2016
Tool Type
Reciprocating Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, hammer, soldering iron
Remove the entire Motor Housing. Then remove the white wires for the armature brush assemblies and save them. I really started new. I took the new motor housing and installed the new field. Then I removed the Fan from the old armature and installed it on the New Armature. You also need to remove the old bearing and reuse it. Tap everything together with a piece of scrap wood and a small hammer. Replace the brush wires and reassemble everything. You will need to solder the black wire from the remote electronic assembly to the switch. I also used a wire nut on the solder joint. Take plenty of pictures with your phone as a reference. This helps with placing the wires in the proper slots. Total time was probably 2 and 1/2 hours with cleaning. Take your time. The rubber boot was the hardest part to take off.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
