Hard
1-2 hours
This is a genuine item that is supplied directly from the original equipment manufacturer for use with Char-Broil grills. It is an identical replacement for a faulty or damaged electronic ignition module that produces the spark that ignites the gas. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality module is sold individually, it includes the heat shield box, the button for the electronic ignition and the electronic Ignition body.
Electronic Ignition Module 80009955
OEM part for: Char-Broil
Part Number: 80009955
$21.37
In Stock
Order within the next 2 minutes and your part ships today! 
Compatibility
This part will fit the following 10 machines
Char-Broil
463420507 (2007) Gas Grill View Diagrams & Manuals
463420508 Designer Series Gas Grill View Diagrams & Manuals
463460708 Four Burner Designer Series Grill View Diagrams & Manuals
463420708 4 Burner Outdoor Stove and Griddle View Diagrams & Manuals
463420509 4-Burner Grill with Stovetop and Sideburner View Diagrams & Manuals
463420707 Outdoor Gas Grill View Diagrams & Manuals
461461108 Gas Grill View Diagrams & Manuals
463420507 Gas Grill View Diagrams & Manuals
463421108 Gas Grill View Diagrams & Manuals
463422107 Gas Grill View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Range Parts
- Outdoor Grill Parts
Repair Videos ?
Articles:
|
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Electronic Ignition Module
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
I replaced most of the most of the parts of the inside of the grill including the igniter box.
Reginald - December 30, 2018
Tool Type
Outdoor Grill
Difficulty
Hard
Time
More than 2 hours
Tools Used
Screwdriver
Parts Used
Replacing the grates and deflectors were easy. The hardest part was replacing the igniter box. I had to disconnect the supply pipe by removing the the knobs and the screws under them that hold it in place. That was the only way for me to take it out. Now I have almost a brand new grill.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Electronic Ignition Module not functioning/sparking also rusted burners and heat tent/shields
LAURENCE - May 22, 2018
👍 0 of 1 people found this instruction helpful
Tool Type
Outdoor Grill
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Power Drill, Wire brush
Parts Used
I searched U-tube videos for a Electronic Ignition Module (EIM) replacement and didn't find one that reflected the exact steps required to replace and install a new module in my type of grill, a Char-Broil 463420507. My grill's physical design placed the EIM module, sandwiched between the burner control valve gas distribution bar and the grill. It was obvious to me that the effort to do this would/should include refurbishing the inner parts of the fire box including the rusted burners, and heat shields/tents and electrodes. To replace the EIM one would have to gain access to the EIM by removing the aforementioned distribution bar held in place by 4 brackets with 8 screws only after removing the rusted burners with a drill to remove the rusted screws. First I removed the lid of the grill and the grates and warming rack. I found that the easiest way to gain access to the EIM problem would be to remove 4 nuts and bolts holding the entire grill top to the supporting cabinet, then lifting (with help)and flipping the result on its back to work on the problem from above instead of below. I tested the EIM to verify that it sparked before reattaching the grill to it's supporting cabinet. Spent about $50, but it was cheaper than buying a new grill.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
