Electronic Board SS-200594
OEM part for: Krups
Part Number: SS-200594
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 1 machine
Krups
This item works with the following types of products:
- Coffee Maker Parts
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Electronic Board
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
board burnt up
Tool Type
Coffee Maker
Difficulty
Medium
Time
30-60 minutes
Tools Used
Nutdriver, torx with security hole, soldering iron
Parts Used
Shutting off and not starting to brew, clicking noise, light flashing
Tool Type
Coffee Maker
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Wrench Set, Nutdriver, Tamper proof tourque bits
Parts Used
* removeing the bottom base with tamper proof tourque bits
that have a hole in the center
*Long Philips and assorted size bits required
2] Board needs top be replaced, clip wires or desolder
*Lable the wires & contact points prior to cutting
*Minimum 35 Watt solder pencil
*Swich needs to come apart, carfuly disassemble spring
3] Several points need to be soldered on the board
5-6 connections
4] Bench test prior ro reassembly, do not leave on, gets very hot.
5] Test operation through several brew cycles
Coffee Maker was not boiling a water
Tool Type
Coffee Maker
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Socket set
Parts Used
Replased a electronic board.
Closed a cover.
Check for work. OK
coffee maker would not complete brewing cycle, stop short of using all the water
Tool Type
Coffee Maker
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Socket set, solder pencil, special security Allen tool
Parts Used
Then I replace the electronic control board, which require the desoldering of 5 wires and soldering the wires to the new board. Again no joy.
Finally I replace the fuse/heater unit and that fixed the problem.
Why it took three parts to fix. Without any guidelines on trouble shooting this I did not realize that the fuses can reset after getting too hot or the heating elements were just getting too hot and the fuses open then reset.
I started with the most probable cause, thermostat then went on to the control board and finally the heater/fuse unit. The unit requires desoldering two wires, soldering the new unit and moving over the thermostat (do not forget to apply thermo paste between the thermostat and heater unit) from the old unit to the new one.
Cost close to 50 dollars to fix, never the less I love this coffee maker(coffee maker no longer available and on E-bay it sells for several hundred dollars) and now its back to making great coffee again.
Coffe Maker workes intermitent
Tool Type
Coffee Maker
Difficulty
Hard
Time
1-2 hours
Tools Used
Screwdriver, Socket set, Soldering iron
2. Replaced a thermostat and attempted to turn coffee maker on.
3. Did not worked
4. Replaced a controller PCB ( it was a problem )
5. Placed all components back into coffee maker.
6. Turned a coffee maker on - GOOD!!!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.