Medium
15-30 minutes
This is an authentic Weber part kit used with the Smokey Mountain Cooker and the Bar-B-Kettle Grill. These dampers are used in order to adjust the airflow through the grill in order to control the heat. This kit includes twelve parts, three each of: damper plates, bolts, nuts, and washers.
Damper Kit 63015
OEM part for: Weber
Part Number: 63015
$31.56
In Stock
Order within the next 8 hours and your part ships today! 
Compatibility
This part will fit the following 12 machines
Weber
721001 (2009) Smokey Mountain Cooker 18.5" View Diagrams & Manuals
2820 Smokey Mountain Smoker View Diagrams & Manuals
2890 (Before 2000) Smokey Mountain Smoker View Diagrams & Manuals
21001 18.5 Bar-B-Kettle Grill View Diagrams & Manuals
21004 Bar-B-Kettle Grill View Diagrams & Manuals
1231004 (2010) Bar-B-Kettle Grill View Diagrams & Manuals
721999 Smokey Mountain Cooker 18.5-In. Blk W/Blk Handle For John Deere View Diagrams & Manuals
2890 (PRIOR TO 2000 MODEL YEAR) Smokey Mountain Cooker View Diagrams & Manuals
721001 Smokey Mountain Cooker 18 Inch View Diagrams & Manuals
SMOKEY MOUNTAIN COOKER Smokey Mountain 14-Inch Cooker View Diagrams & Manuals
SMOKEY MOUNTAIN COOKER & SMOKER Smokey Mountain 18 1/2-Inch Cooker And Smoker View Diagrams & Manuals
BAR-B- 18 Bar-B-Kettle 18 1/2-Inch Charcoal Grill View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
Repair Videos ?
Articles:
|
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Damper parts
East to replace old parts they fit great. Just like brand new.
Guest -
May 19, 2020
Verified Purchase
Worked great
Part was perfect! Thanks!
Guest -
December 30, 2019
Verified Purchase
Damper Kit Order
This is the second order that I have placed with E Replacement Parts. They have been able to find parts for my grills that some manufacturers said were no longer available. Great Service with Great Prices! Thanks, Tim B
Guest -
October 17, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Damper Kit
The 3 dampers are not installed with a bolt. Will your 3 piece damper work with this??Thanks
Bob
for model number 18.5 early model
asked on 2022-06-10
Hello Bob, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit, which should be on the frame on the back or inside the cabinet where you store the tank. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you.
eReplacementParts Team June 10, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Weber 18.5" charcoal grill, three independent bottom air dampers; original hardware rusted frozen and the dampers would not move.
Sumner - July 20, 2016
👍 5 of 6 people found this instruction helpful
Tool Type
Outdoor Grill
Difficulty
Medium
Time
15-30 minutes
Tools Used
, Dremel with cutoff wheel
Parts Used
Repair instructions came with the kit.
1. From the inside, cut off the three securing nuts with the Dremel. These nuts are of the sheet metal type and cut easily. Be careful not to cut the grill itself.
2. Remove old dampers and rusted hardware.
3. Vacuum out metal debris; clean inside and outside surfaces of the grill.
4. Install new dampers with the supplied hardware.
NOTE: since the supplied hardware will rust over time, I replaced it with 1/4"x3/4" stainless steel bolts, s/s washers and full-metal lock nuts. Push a bolt through the damper, position it in place, put on a washer and nut. Tighten the nut just so that it's secure, but the damper works still moves freely.
1. From the inside, cut off the three securing nuts with the Dremel. These nuts are of the sheet metal type and cut easily. Be careful not to cut the grill itself.
2. Remove old dampers and rusted hardware.
3. Vacuum out metal debris; clean inside and outside surfaces of the grill.
4. Install new dampers with the supplied hardware.
NOTE: since the supplied hardware will rust over time, I replaced it with 1/4"x3/4" stainless steel bolts, s/s washers and full-metal lock nuts. Push a bolt through the damper, position it in place, put on a washer and nut. Tighten the nut just so that it's secure, but the damper works still moves freely.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
My lower dampers on my 18.5 inch grill where riveted on.
joseph - June 7, 2016
👍 3 of 3 people found this instruction helpful
Tool Type
Outdoor Grill
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Power Drill, Wrench Set, dremel grinding wheel, cordless drill
Parts Used
The rivets spun when I tried to drill them out so I had to grind them off. once this was done the new ones went on easily. The lid dampers on both of my grills replaced easily. Both grills are now better than when they were new since the upper damper has a rubber insulated handle. I am very pleased
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Damper would not open
Jeff - September 20, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set, Dremel tool
Parts Used
Cut off rusted bolts, put new damper and bolts on,simple.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Missing dampers
Edward - May 20, 2020
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Wrench Set
Parts Used
Used bolts, washers, nuts provided with kit tightened them up started grill cooked dinner
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Grill could not be shut down.
Michael - March 11, 2016
Tool Type
Outdoor Grill
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Nutdriver, 4in. grinder to cut off rusted bolts.
Parts Used
Dump out grill. Flip upside down and grind off the old bolts. Replace with new ones and tighten.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
