eReplacementParts.com
866-322-9842
Delta Parts
Repair Parts Home  Power Tool Parts  Delta Parts  1342156 Cutterhead Pulley
photo thumbnailphoto thumbnail360 degree photo thumbnail
Cutterhead Pulley

Cutterhead Pulley

Part Number: 1342156
Delta
Availability: Factory Backorder [ more info ]
Price: $16.91
Quantity:
Date Available: Unknown
Product Information
Manufacturer: Delta
Product Number: 1342156
Classification: Part
Weight: 0.27 lbs.
Shipping: Ships Worldwide
Description:
This is a genuine OEM approved replacement part designed for use with Delta planers. This is the part of the planer which the belt connects to allowing to drive the cutterhead. This pulley is made out of metal and it is sold individually. To complete this repair you would need a screwdriver and a wrench.
Compatibility
Products Compatibility

This item works with the following types of products:

  • • Planer
Questions & Answers

what is the shipping rate for montreal canada for a pulley 1342156. thanks
yvan duteau
Hello Yvan, For all international shipping requests, order updates, and information, please visit our partner, iGlobal Stores at www.iglobal.io and selecting "eReplacement Parts" in the top right. Should you be unable to find the information you are looking for on their website, you are welcome to contact them using the information at the bottom of their website.
Is the lock key included in this price? The one that locks the pulley to the shaft.
Dave for model number 22-560
Hi Dave, Thank you for your question. The lock key is sold separately. The part number listed under your model number for the key is 1349860. I hope this helps. Thank you and have a great day!
Repair Instructions: Submitted by Customers Like You
10 of 11 people found this instruction helpful
Tool Type:
Planer
Parts Used:
Cutterhead Pulley - 1342156
Key - 1349860
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, fine file. heat gun, duct tape, Loctite, wrench, allen wr
Nut on cutter head drive pulley came loose during normal operation and belt, pulley and key were destroyed. Also, belt cover was badly damaged.
1. Be certain the planer is disconnected from power! Remove side cover by taking out two Phillips head screws and taking off height locking handle.
2. Remove two more Phillips head screws holding the damaged belt cover in place and remove the damaged belt and cover.
3. Use the heat gun to remold the cover and then apply duct tape to the inside and outside of the cover where the belt had worn a track thru the cover. (Replacement cover is no longer available).
4. Next I wiggled the pulley until it finally pulled off the shaft of the cutter head and also removed the damaged key sitting in the key-way. Used the file and 400 grit emery paper to smooth out the shaft, especially the area around the lip of the key-way.
5. Dropped in the new key and inserted the new pulley on the shaft. Put Removable Loctite on the threads of the nut and shaft, then tightened the nut holding the pulley onto the cutter head shaft.
6. Worked the new 6-rib drive belt onto the motor pulley and cutter head pulley. This is a very tight fit, so you need to start it on the smaller motor pulley and then force it in and forward on the larger new cutter head pulley. It will fit, but requires some brute force.
7. Before reassembly of the reshaped belt cover and planer side cover, I plugged the planer into power and tested it without any load (wood being planed). It ran well and there was no wobble in the new pulley which had fit smoothly on the cutter head shaft.
8. Disconnected from power and reinstalled the belt cover with two Phillips head screws, the main side cover using two Phillips head screws and reassembled the cutter head locking handle.
9. Reconnected to power and tested without planing wood and then under load. Works super!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
5 of 5 people found this instruction helpful
Tool Type:
Planer
Parts Used:
Cutterhead Pulley - 1342156
Key - 1349860
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers, Adjustable Wrench, mallet, wooden block, flat file, emory cloth
The pulley was out of round and key broken
Remove broken pulley and key.
Smooth any rough spots on the head cutter shaft
Align the new pulley and key
With a wooden block to protect the pulley, use your mallet or hammer to strike the pulley until its completely seated.
Replace the drive belt carefully
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 4 people found this instruction helpful
Tool Type:
Planer
Parts Used:
Cutterhead Pulley - 1342156
Key - 1349860
Drive Belt 9/16" x 14-1/2" - 140J6
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set
Nut loosened on cutter head drive and destroyed belt and pulley
Remove the belt cover, remove the damaged belt and pulley. Make sure the key way in the cutterhead shaft is okay. Install the key in the shaft line up the key and the key way in the pulley and tap it on with a mallet. Then use some blue loctite on the shaft and tighten the nut.
Install the new belt and replace the cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Planer
Parts Used:
Carbon Brush - 1313113
Cutterhead Pulley - 1342156
Key - 1349860
Drive Belt - 22-563
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Wrench Set, Epoxy (plastic weld)
The drive pulley worn out causing the belt to go out of alignment, melting the belt and belt guard.
I've got a Delta 22-560. The planer smelt like burnt plastic, so I removed one of the side covers. There are 2 screws at the bottom of the side cover. I then found out that this side housed the chain drives, and they all looked alright. So I then removed the other side cover, and the cutterhead locking handle. This exposed the belt guard and belt. I then could see that they were all melted and worn out. The belt pulley came loose and the center hole in the pulley was worn too large. So I ordered a new cutterhead pulley, key- way and drive belt. I tried to order a new belt guard but I found out that it was discontinued. So I formed one out of plastic. I then reinstalled the parts and assembled the side covers. While I fixing it, I also replaced both motor brushes and cleaned off the outfeed roller and the infeed roller. For $70.00 in parts, I'm back woodworking. Better than $300-$400 for a new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Planer
Parts Used:
Cutterhead Pulley - 1342156
Key - 1349860
Cutterhead Lock - 1342211
Drive Belt 9/16" x 14-1/2" - 140J6
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set
Planer lock key broke, perhaps because the drive belt slipped off
1) Removed damaged belt, cutter head pulley, and key
2) Keyway and key were damaged, as well as pulley and belt and cover
3) Cut and glued on a piece of plastic to repair cover. Used knife and chisel to clean damaged part of cover
4) Filed and cleaned shaft for new pulley and key.
5) Oiled parts. Received new parts. Installation was easy
6) Verified nothing was rubbing, then did test start of motor
7) All was well!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Planer
Parts Used:
Cutterhead Pulley - 1342156
Drive Belt 9/16" x 14-1/2" - 140J6
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set, Wrench Set
Worn out pulley and broken belt
Remove side cover
Remove pulley cover
Remove pulley holding but
Remove pulley by prying it with large screwdriver
Replace pulley and belt
Carefully tap pulley with mallet
Install nut and tighten it
Install new belt and side cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Planer
Parts Used:
Cutterhead Pulley - 1342156
Key - 1349860
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set, Allen Wrench
Key worn down which wore out the cutterhead
Removed side panel
Removed Nut
Removed old key
Replaced key with new one after cleaning up shaft with emery cloth
Replaced Nut
Replaced side panel
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Planer
Parts Used:
Cutterhead Pulley - 1342156
Key - 1349860
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Socket set, Wrench Set
cutterhead pulley came loose
removed cutterhead had keyway reworked for new key
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Planer
Parts Used:
Cutterhead Pulley - 1342156
Key - 1349860
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Wrench Set, Gear puller
Pulley on cutter head had come loose and worn the inside so was loose on shaft.
Removed shields to get to drive pulley
Removed nut on end of shaft
Used gear puller to remove old pulley
Put in new key and placed new pulley on shaft
Put nut on end of shaft and tightened
Remplace drive belt and shields.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Planer
Parts Used:
Cutterhead Pulley - 1342156
Drive Belt - 22-563
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Socket set, Wrench Set, Torx wrench
Drive pulley and belt damaged
Removed damaged pulley and belt and replaced with new.
Nut on pulley had come lose. Used "Loctite" and extra torque to replace.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
3 Reviews
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Worked like original
    Everything was as expected. Planer working again.
    Guest - December 3, 2019 Verified Purchase
    Planer pulley
    Arrived on time. Quality is very good. Easy to install on the shaft. To install the belt: start by putting the belt onto the motor pulley, use a wrench on the nut to turn the cutter shaft while guiding the belt onto the cutter shaft pulley.
    Gary - November 27, 2019 Verified Purchase
    easy repair
    great worked easy repair
    Jerry - June 5, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Delta
    Product Number: 1342156
    Classification: Part
    Weight: 0.27 lbs.
    Shipping: Ships Worldwide
    Related Products
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal

    fancyboxy