Easy
Less than 15 minutes
This is a genuine replacement cord assembly which is supplied directly from the original equipment manufacturer for use with Oster Pro clippers. The cord is hardwired inside the unit to supply electricity from a standard U.S. outlet if the cord is damaged it is important to replace it before continuing to use the equipment. This high-quality rubber insulated cord is sold individually.
Cord Assembly 41890000000
OEM part for: Oster Pro
Part Number: 41890000000
$11.94
In Stock
Ships within 1 business day 
Compatibility
This Cord Assembly will fit the following 13 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Oster Pro
Show More Compatible ModelsThis item works with the following types of products:
- Hair Clipper Parts
- Engine Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Cord Assembly
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Power cord was damaged.
Robert - October 19, 2022
Tool Type
Hair Clipper
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Paper towel and a small paint brush to remove hair.
Parts Used
1 Remove back screws with a number 2 phillips.
2 Remove front screws with a number 1 phillips.
3 Remove cover and clean out excess hair.
4 Remove and install new cord with push on connectors.
5 Reassemble clippers.
2 Remove front screws with a number 1 phillips.
3 Remove cover and clean out excess hair.
4 Remove and install new cord with push on connectors.
5 Reassemble clippers.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Intermittant power when cord was flexed
Jim - December 18, 2018
Tool Type
Hair Clipper
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Brain
Parts Used
1. Took apart the shell of the clippers
2. Pulled off connectors for cord wires
3. connected gnu cord
4 Reassembled shell
5, tested
2. Pulled off connectors for cord wires
3. connected gnu cord
4 Reassembled shell
5, tested
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cord was shorted out. When you tried to use the clipper it would start and stop as you moved it.
Bruce - April 7, 2017
Tool Type
Hair Clipper
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
I simply removed the 4 small allen screws from the clipper. Dis-connected the 2 wires from their posts and connected the new cord back on the posts and installed the back on the clipper, secured with the 4 screws and done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The clipper had a broken wire in the cord causing the clipper not to operate.
Gerald - August 17, 2016
Tool Type
Hair Clipper
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
I unscrewed the four screw and removed top cover. I used a pair of needle nose pliers to release the hot black wire from the clipper off/on switch. Then removed the second white neutral wire from the motor terminal. Then I took the new cord and with needle nose pliers attached the wires in reverse ( black to the clippers switch n white to the motor terminal). I seated the rubber square part of the cord to its cradle then replace the wire hanger then cover plate next. Replaced the four Philips head screws ... Then plugged the cord in and tested the clipper ... Note: make sure you off/on switch extension is traveling properly to turn clippers off/on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bad power cord.
John - August 7, 2016
Tool Type
Hair Clipper
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Removed the old power cord and installed the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
