866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Lawn Equipment Parts  Subaru / Robin Parts  214-62540-08 Bowl Gasket

Bowl Gasket

Part Number: 214-62540-08
Subaru / Robin
Availability: 25+ in stock
Price: $3.99
Quantity:
Ships within 1 business day
Description:
This is a Genuine OEM replacement part, it is sold individually. If the carburetor is leaking fuel it is recommended to replace the Bowl Gasket. Gaskets and O-rings are a common source of problems. They eventually shrink, causing fuel and air leaks that lead to poor engine performance.
Product Information
Manufacturer: Subaru / Robin
Product Number: 214-62540-08
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Related Products
Compatibility

This part is compatible with the following machines:

Subaru / Robin

Products Compatibility

This item works with the following types of products:

  • • Engine
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
8 of 9 people found this instruction helpful
Tool Type:
Engine
Parts Used:
Packing - 214-62450-08
Bowl Gasket - 214-62540-08
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
Had a leaky carb bowl
Very simple. Just be careful with gasket. It has to be stretched a bit to seat properly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 4 people found this instruction helpful
Tool Type:
Engine
Parts Used:
Packing - 214-62450-08
Bowl Gasket - 214-62540-08
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set, None
Pressure washer, gas bowl leaking
First drain gas tank or if you have a shut off valve to stop gas from leaking when you remove the gas bowl. Remove bowl by using a small wrench or socket, remove old gasket and clean make sure new gasket is seated in grove around carburetor float, replace gas bowl, replace bolt in bottom of bowl do not over tighten.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
6 of 8 people found this instruction helpful
Tool Type:
Engine
Parts Used:
Bowl Gasket - 214-62540-08
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Adjustable Wrench
Broken float bowl gasket on Subaru SP-170 one cylinder engine.
Remove Float Bowl. Insert gasket into groove. Replace Float Bowl. This part was difficult to find around here, where I live. I'm glad I found you. Appreciate the fast and accurate service.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Engine
Parts Used:
Bowl Gasket - 214-62540-08
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Wrench Set
Bowl gasket leaked
Remove the bolt and washer from the bottom of bowl
Remove the bowl gasket and make sure it has a clean surface for the new one
Install the new gasket
Install the bolt and washer
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Engine
Parts Used:
Packing - 214-62450-08
Bowl Gasket - 214-62540-08
Repair Difficulty:
Hard
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set
Dirty gas fouled carburetor and damaged gaskets.
Disassembled carburetor, cleaned fouling and replaced damaged gaskets/o-rings.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Hard to crank. Then would run very rough, carburetor


Remove the air cleaner assembly. ereplacementparts has a you tube video on this subject. Here it is https://www.youtube.com/watch?v=faM2nla4_u4 . Empty the fuel from the tank or use some tube clamp pliers to stop the flow of fuel. Remove the carburetor from the engine. Remember where the spring and throttle where located. Then start removing the parts from the carb. and laying them on a clean towel. Once all the parts are off, clean the carb. with carb, cleaner. I did use some fishing line to clean out the small passages. Once it was clean and dry, I started to assemble it. I replaced the needle, cup and bowl o-ring. Then installed the float bowl with the o-ring and bolt. Installed the insulator with the gaskets on both sides of it. I then installed the new union and all of the parts attached to it. I removed the muffler, then the gasket and cleaned the area before I installed the new muffler gasket.
Removed the rocker arm cover and replaced the gasket beneath it. Installed a new fuel filter in the tank. Then before I installed the air cleaner, I exchanged the old packing (gasket) for the new one.
Running great again.










Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Engine
Parts Used:
Bowl Gasket - 214-62540-08
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set, Adjustable Wrench
Gas leaking from Bowl
Remove the bolt from the bottom of the carb bowl. Then remove the bowl and clean it. Remove the old gasket and replace it with the new one. Then install the bowl. No more leaks!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Engine
Parts Used:
Bowl Gasket - 214-62540-08
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Wrench Set
Fuel leak
Remove the bolt and seal from the bottom of the bowl. Cleaned the inside of the bowl, then replaced the bowl gasket. Installed the bowl with the bolt and seal. No more fuel leaks.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Engine
Parts Used:
Bowl Gasket - 214-62540-08
Packing - 277-32604-08
Gasket2(Insulator) - 20A-35903-03
Insulator Gasket - 20A-35902-03
Packing - 277-62110-18
Cup - 277-62100-18
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Wrench Set, Nutdriver
Carburator needed cleaning and also new gaskets
Followed instructions on YouTube video.
The parts which I ordered were real OEM parts which ensured a correct fit e.g. for the gaskets.
I once did order a new carburator (Chinese knock-off) from the Big River "A" online but the gaskets did not fit. Had to send it back.
But using OEM parts on the original carburator was the better choice.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Engine
Parts Used:
Gasket(Insulator) - 282-35901-03
Gasket 2 (Insulator) - 227-35904-03
Bowl Gasket - 214-62540-08
Insulator - 227-32901-13
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Socket set
Gasket and insulator leaking
Took air filter hosing off removed governor springs and used needle nose pliers to remove fuel line and slid carburetor off cleaned up surfaces and replaced parts like I removed
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Bowl Gasket - ( 214-62540-08 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy