Easy
Less than 15 minutes
This is a Genuine Manufacturer Approved replacement part designed for Char-Broil Grills. This item is made out of Metal and it is Sold Individually. The Carryover tube provides support burners, and carries the flame from one burner to the next. They also help keep the burners securely in place. Over time, your carryover tubes may rust or warp. This would be the time to replace them.
Carryover Tube 80015760
OEM part for: Char-Broil
Part Number: 80015760
$4.99
In Stock
Order within the next 5 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 9 machines
Char-Broil
463248208 Infrared Commercial Series Grill View Diagrams & Manuals
463260107 Four-Burner Stainless Steel Dual Fuel Grill View Diagrams & Manuals
463261607 (2007) Gas Grill View Diagrams & Manuals
463268107 Commercial Series Grill View Diagrams & Manuals
464220008 (2008) Gas Grill View Diagrams & Manuals
466248208 Commercial Series Grill View Diagrams & Manuals
461260108 Gas Grill View Diagrams & Manuals
464220008 Gas Grill View Diagrams & Manuals
466261808 Gas Grill View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
This part replaces obsolete part #: 80006583
Repair Videos ?
Articles:
|
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
The right part to repair grill
E-parts had the right parts to fit my grill and at a good price. Placed my order and the following week my parts arrived. They were the exact replacement part and fit perfectly. Twenty minutes later the grill was repaired and working like new
Guest -
September 16, 2020
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Carryover Tube
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Crossover tube rusted out.
David - March 30, 2017
👍 2 of 2 people found this instruction helpful
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Vice grips
Parts Used
1. Removed the grates from the grill along with the metal guards over the burners.
2. Used a Phillips head screwdriver to remove the screws at both ends that hold the crossover tube to the burners. For the screws that were rusted into place I used some penetrating oil and a pair of small Vice grips to clamp onto the screw head to break it loose.
3. Installed the new crossover tube with the new screws included with the tube.
2. Used a Phillips head screwdriver to remove the screws at both ends that hold the crossover tube to the burners. For the screws that were rusted into place I used some penetrating oil and a pair of small Vice grips to clamp onto the screw head to break it loose.
3. Installed the new crossover tube with the new screws included with the tube.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Carry over tubes rusted out, and grates needed replacing (grates were 14 years old)
Thomas - July 9, 2020
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Power Drill
Repair is easy;
1. Remove grill grates
2. Remove flair guards (the V shaped metal pieces)
3. Remove old Carry over tubes (might need to be drilled out if bady rusted)
4. Install new Cary over tubes
5. Install new flair guards
6. Install new grates.
Only issue I ran into was only one grate showed up. Website shows a 3 pack, box said 3 pack, however only 1 was shipped. I have tried to contact the company several times via phone, and e-mail, and still no response. After waiting almost 4 weeks for the items to ship, and the items not being received correctly, I may use a different vendor in the future. If they are willing to make this right, I can change this review.
1. Remove grill grates
2. Remove flair guards (the V shaped metal pieces)
3. Remove old Carry over tubes (might need to be drilled out if bady rusted)
4. Install new Cary over tubes
5. Install new flair guards
6. Install new grates.
Only issue I ran into was only one grate showed up. Website shows a 3 pack, box said 3 pack, however only 1 was shipped. I have tried to contact the company several times via phone, and e-mail, and still no response. After waiting almost 4 weeks for the items to ship, and the items not being received correctly, I may use a different vendor in the future. If they are willing to make this right, I can change this review.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Carry over tubes corroded.
Ivan - July 17, 2018
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Power Drill
Parts Used
Removed old tubes, drilled pilot holes into existing rivets, and connected new tubes.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Deteriorating from the years of use.
tommy - July 27, 2017
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed the part and installed the new part.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The original tubes rusted and had to be replaced
Tom - June 27, 2017
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed old tubes and replaced with new tubes
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Carry over tubes burnt out
Matthew - June 15, 2017
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed the screws from the burnt out tubes and replaced them with the new tubes
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Parts worn out
Gerald - March 18, 2017
Tool Type
Outdoor Grill
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver
Basically just replaced the parts, very simple. If I can do it anyone can.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Gas grill needed carryover tubes from main ignition tube
Gene - May 9, 2016
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Remove the screws from the old ones and install the new ones. Too easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Old, worn out and rusted parts not made of stainless steel on original grill
Robert - May 8, 2016
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, None required
Parts Used
Simple repair to replace all working parts on grill - less than $40 to make a $400 grill good as new.
Didn't get the ignition module on the first go round. Headed back to do that now. Most of the grill was well made with Stainless steel panels and those look like new. The few panels that are not stainless can be painted or replaced. Simple task and took only a few minutes. Grill works like new again and will start a bit better after replacing the ignition module.
Aside from the carryover tubes listed, I got new burners and burner covers.
No special instructions needed. More intuitively obvious than calculus.
Didn't get the ignition module on the first go round. Headed back to do that now. Most of the grill was well made with Stainless steel panels and those look like new. The few panels that are not stainless can be painted or replaced. Simple task and took only a few minutes. Grill works like new again and will start a bit better after replacing the ignition module.
Aside from the carryover tubes listed, I got new burners and burner covers.
No special instructions needed. More intuitively obvious than calculus.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Old tubes rusted out.
James - April 14, 2016
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wire cutting pliers
Parts Used
Remove the old screws clean gas holes install new tubes.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
