This is a genuine manufacturer sourced replacement part. It is made to work on Makita gas powered blowers. It helps to mix and supply air and fuel to the engine. This is a metal body carburetor with a rubber primer bulb. It is advised to replace gaskets (sold separately) when replacing a carburetor.
To complete this repair you would need a wrench.
• Remove air box cover, filter and the base
• Disconnect fuel lines and remove old carburetor
• Install new carburetor and re-connect fuel lines
• Re-assemble and test the unit
Carburetor 168641-9
OEM part for: Makita
Part Number: 168641-9
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.18 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 6 machines
Makita
This item works with the following types of products:
- Blower Parts
This part replaces obsolete part #: 592-60220-01, 592-60220-00
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Carburetor
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Would primer bulb would not fill with gas
Tool Type
Blower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Now, get back to work!
Carb primer bulb did not prime fuel anymore.
Tool Type
Blower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Blower would start, but would stop running when engine revved or choke lever adjusted
Tool Type
Blower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
no power
Tool Type
Blower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Took filter out.
Lifted throttle linkage cable off carb.
Removed plastic fuel return line and rubber fuel line from carb. Just pulls off.
Unscrewed 2 screws holding carb to intake/cylinder.
Put new carb using those same 2 screws.
Put what I took off back on.
Easy.
Throttle Lever on Carburetor Broke
Tool Type
Blower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
2) Removed Air Filter and then the two long screws that hold on the Carburetor
3) Ordered new carb from ereplacementparts.com. I found a parts diagram for the carb on-line but no one seems to sell the individual carb pieces so I had to order the entire carb as a unit.
4) New one came in about 5 days.
5) Installed it with a screwdriver. Took about 5 minutes.
6) Makita Blower started up with one pull.
Faulty carburetor - priming pump would not work
Tool Type
Blower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Pulled off the two plastic gas lines from bottom of carburetor
Removed 3 screws and removed the gas tank.
Removed 4 screws and pulled off the carburetor
Installed new carburetor and reversed the steps.
Primed the carburetor and it started on the first pull.
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.