Easy
15-30 minutes
OEM sourced replacement carburetor designed for use with Powermate trimmer. Its primary function is to mix air and gas before the fuel mix goes to the engine. This is a metal body carburetor with a rubber fuel hose included. Please note gaskets are sold separately.
If the engine starts and then quickly dies, replacing carburetor may resolve this issue.
You would need a screwdriver to complete this repair.
• Remove the air cleaner cover, filter and the base
• Remove old carburetor and install new one
• Re-assemble and test the equipment
Carburetor A100671
OEM part for: Powermate
Part Number: A100671
$102.28
In Stock
Order within the next 5 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.54 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Carburetor will fit the following 2 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Powermate
This item works with the following types of products:
- Trimmer Parts
Customer Part Reviews ?
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Carburetor
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
No run condition even after carb cleaned.
Daniel - September 15, 2022
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
Removed air filter assembly. Removed carb and disconnected linkage and fuel line. Connected linkage and fuel line to new carb. Installed carb. Installed air filter assembly. Super easy job. Started on first pull.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sat to long with gas in it varnished up.
Andrew - August 22, 2022
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers, Socket set, None needed
Parts Used
Removed old carb, removed and cleaned gasket installed new gasket and carb it started right up and went to work. Thank you. 😊 great job
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The unit would only run after priming it a dozen times,then it died,prime, start,die,that is all it would do.
Lee - July 6, 2020
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Socket set, Wrench Set
Parts Used
I removed the carburetor and the fuel tank, I washed the tank out with hot soapy water,rinsed it and put in the sun to dry.I then put the new carburetor on the unit while the tank was drying.I put the fuel tank back on the unit,filled with fresh fuel and started the engine,it started on the second pull and runs like new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The engine would run if I put fuel in the carburetor throat,and it had old fuel in it.
Lee - June 26, 2020
Tool Type
Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Pliers, Socket set, Wrench Set, Ratchet and an extension.
Parts Used
I removed the carb. and the fuel tank from the unit,and then I washed the drained tank out with hot soapy water "VERY SOAPY".I then replaced the fuel line,after the tank was dried out,I reassembled the tank and the carb. onto the unit.I put in fresh fuel and the engine started on the second pull.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bad carb
Trent - April 30, 2020
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Socket set
Parts Used
Swapped out carbs
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Carburetor had to be replaced
Daniel - May 9, 2018
👍 1 of 2 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set
Parts Used
Removed air filter and housing
Removed gas lines from carb and drained old gas from tank
Removed carb from studs, being careful to remove gaskets for reuse
Installed new carb being careful to install gaskets.hoses and linkage as removed
Reinstalled air filter housing and filter
Removed gas lines from carb and drained old gas from tank
Removed carb from studs, being careful to remove gaskets for reuse
Installed new carb being careful to install gaskets.hoses and linkage as removed
Reinstalled air filter housing and filter
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Carb bowl nut stripped had to replace carb
Karen - December 3, 2016
👍 0 of 1 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
Parts Used
Removed Filter &Throttle flange & old carb with 2 nuts and 2 bolts.
Cleaned mounting flange, installed new gasket
Installed linkage to new carb slid new carb onto mounting studs
Reinstalled throttle flange & filter housing tightened nuts and bolts
Installed filter primed carb, started field trimmer and went to work
Cleaned mounting flange, installed new gasket
Installed linkage to new carb slid new carb onto mounting studs
Reinstalled throttle flange & filter housing tightened nuts and bolts
Installed filter primed carb, started field trimmer and went to work
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
