Easy
15-30 minutes
This is an Authentic OEM replacement part used on Gas-Powered Handheld Gas Blowers. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engine won\'t start and the tank is full of fresh fuel, test the carburetor by removing the air filter and pouring about a teaspoon of fuel into the carburetor. Pull the starter rope. If the engine starts and then quickly dies, the carburetor is likely the problem.
This Assembly includes a Metal Body Carburetor with a Plastic Throttle Lever and Two (2) Carburetor Gaskets.
Carburetor Kit 590460102
OEM part for: Husqvarna, Craftsman, Jonsered
Part Number: 590460102
$41.09
In Stock
Order within the next 3 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.22 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 21 machines
Husqvarna
125B 28cc 2-Stroke 170-MPH Gas-Powered Handheld Gas Blower View Diagrams & Manuals
125BVX (2008-01) Handheld Leaf Blower View Diagrams & Manuals
125BVX (2007-05) Handheld Leaf Blower View Diagrams & Manuals
125BVX (2011-04) Handheld Leaf Blower View Diagrams & Manuals
125BVX (2010-06) 952711902, Handheld Leaf Blower View Diagrams & Manuals
125BX (2008-06) Handheld Leaf Blower View Diagrams & Manuals
125BX (2010-06) Handheld Leaf Blower View Diagrams & Manuals
125BVX (2001-04) 28cc 2-Cycle Gas Powered 170 Mph Blower/Vac With Smart Start View Diagrams & Manuals
125BVX (2008-06) 28cc 2-Cycle Gas Powered 170 Mph Blower/Vac With Smart Start View Diagrams & Manuals
Craftsman
358794810 Blower View Diagrams & Manuals
358794811 Blower View Diagrams & Manuals
Jonsered
B2126 EU ROW AU NZ (2011-03) Blower View Diagrams & Manuals
B2126 EU RoW AU NZ (2011-04) Blower View Diagrams & Manuals
B2126 ROW (2008-03) Blower View Diagrams & Manuals
B2126 US CAN (2008-03) Blower View Diagrams & Manuals
B2126 US CAN (2010-06) Blower View Diagrams & Manuals
BV2126 (2008-06) Blower View Diagrams & Manuals
BV2126 EU ROW AU NZ (2010-06) Blower View Diagrams & Manuals
BV2126 US CAN (2008-03) Blower View Diagrams & Manuals
BV2126 US CAN (2010-06) Blower View Diagrams & Manuals
B2126 (2008-06) Blower View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Blower Parts
This part replaces obsolete part #: 545081811, 5450818-11
Repair Videos ?
Watch the Repair Video for
Carburetor Kit
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
22
4 stars
0
3 stars
0
2 stars
0
1 stars
1
< PREV
- 1
- 2
- 3
All necessary parts were included
All parts& gaskets were included and easy to install
Guest -
October 16, 2023
Verified Purchase
Easy repair, works great.
Part arrived quickly. Leaf blower works again.
Guest -
October 9, 2023
Verified Purchase
EASY
Along with the fuel line kit. It fixed my leaf blower.
Guest -
June 13, 2023
Verified Purchase
Excellent part
Very easy to replace. 10 minute job. Part works perfectly. Old one was 8 years old. New one should give me another 8 years. Part was arrived on time.
Guest -
April 11, 2023
Verified Purchase
worked as expected
New parts shipped in timely matter and fir perfectly
Guest -
February 8, 2022
Verified Purchase
Received the carburetor three poles and it was running
Received the carburetor three poles and it was running
Guest -
November 11, 2021
Verified Purchase
OE part
Fit no problem, started up right away
Guest -
September 17, 2021
Verified Purchase
Easy repair
Arrived as expected.
Guest -
August 14, 2021
Verified Purchase
Exactly what I needed.
Everything came as ordered.
Assembled the carburetor and fuel lines in minutes and installed on my leaf blower.
Works like it did when I first purchased it.
Thanks
Mark -
July 28, 2021
Verified Purchase
Great place to get parts.
Parts arrived on time and worked great. Will used this place again.
Guest -
December 3, 2020
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Carburetor Kit
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Blower hard to start and wouldn't idle unless choke was on. Apparent effect of using old gas.
Roy - April 13, 2016
👍 11 of 14 people found this instruction helpful
Tool Type
Blower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Nutdriver, 21 spline carburetor adjusting tool
Used a nut driver to remove the old carburetor assembly. Removed and re-attached fuel lines to the new carburetor in the same way they were previously attached. Installed the new carburetor assembly with new gaskets. Removed and re-installed the in-tank fuel filter and installed the new air filter. The blower started right up and the Hi and Low speed needles and idle speed were adjusted using a 21 spline carburetor adjusting tool and phillips screw driver. The parts arrived earlier than expected and were exactly what I needed to get my blower going. I'll use eReplacementParts again. Thanks.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Old carbureter was bad due to ethanol in gas
Don - August 6, 2016
👍 4 of 4 people found this instruction helpful
Tool Type
Blower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set
Parts Used
1. Removed air cleaner
2. Removed 2 nuts that held carbureter in place
3. Removed side of leaf blower housing to free throttle linkage from carbureter.
4. Pulled old carbureter out from rubber housing, and removed 2 fuel tubes.
5. Pushed 2 fuel tubes onto new carbureter, then inserted carb onto 2 mounting bolts.
6. Installed 2 mounting nuts and tightened.
7. Installed throttle linkage and side of leaf blower housing.
8. Reinstalled air cleaner.
2. Removed 2 nuts that held carbureter in place
3. Removed side of leaf blower housing to free throttle linkage from carbureter.
4. Pulled old carbureter out from rubber housing, and removed 2 fuel tubes.
5. Pushed 2 fuel tubes onto new carbureter, then inserted carb onto 2 mounting bolts.
6. Installed 2 mounting nuts and tightened.
7. Installed throttle linkage and side of leaf blower housing.
8. Reinstalled air cleaner.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
No fuel to cylinder
william - November 19, 2015
👍 4 of 4 people found this instruction helpful
Tool Type
Blower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set, hex wrench
Parts Used
Don't bother cleaning old carburetor. Replace it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Blower was hard to start and when started would not run off coke.
AUSTIN - April 9, 2016
👍 5 of 7 people found this instruction helpful
Tool Type
Blower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Nutdriver
Parts Used
Went to you tube under Husqvarna 125B blower. Found a good video. made the repair. Did have to stop and go buy new fuel line, that's why it took a little longer for the repair. Simple fix. Pumped the bulb 3 to 5 times pulled it 3 times and it ran like new. Had bought a Worx electric at Walmart but had not opened the box. Cost was 77.00 plus tax; new carb 35.00 with shipping. Took the Worx back and got a refund.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Blower would not stay running without continually pressing primer bulb.
Jeffrey - November 23, 2015
👍 4 of 5 people found this instruction helpful
Tool Type
Blower
Difficulty
Medium
Time
15-30 minutes
Tools Used
Pliers, Nutdriver, Allen Wrench
Parts Used
Remove air cleaner assembly
Separate primer bulb from air cleaner assembly
Remove starter pull chord assembly
Remove plastic side panel
Remove carburetor & detach fuel lines
Install new carburetor by reversing order
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Carburetor problems
Bobby - June 18, 2016
👍 2 of 2 people found this instruction helpful
Tool Type
Blower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Nutdriver
Parts Used
Remove air box cover, air filter. Then remove the fuel line and the throttle link from the carburetor and fuel line from the primer. Remove the two nut securing the carburetor and air box base. Remove the carburetor and gaskets. Install the back gasket, then the carburetor then the front gasket. Thread the two nuts with the new carburetor and new gaskets with the air box base onto the screws. Replace the air filter and air box cover and you're done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Primer bulb was not reforming. Not priming.
David - April 6, 2016
👍 2 of 2 people found this instruction helpful
Tool Type
Blower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Nutdriver, Cordless drives & Allen bit
Parts Used
Remove housing cover. Remove air filter and cowling. Remove cab assy & replace with new assy. Reassemble air filter housing and install new filter. Replace outer housing cover.
Fill fuel tank, prime & start engine.
Do the happy dance!!!
Fill fuel tank, prime & start engine.
Do the happy dance!!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
steve - December 18, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Blower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Just removed the old carburetor and installed the new one
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Leaf blower would run for a short period and stop
Jerry - October 1, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Blower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Pliers, Socket set
Replaced carb and fuel lines and primer bulb
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bad carburetor.
Glen - April 1, 2018
👍 2 of 3 people found this instruction helpful
Tool Type
Blower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers, Socket set, Nutdriver, None
Parts Used
Replaced the old carburetor with the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
