Easy
Less than 15 minutes
This genuine replacement component is supplied by the original equipment manufacturer for use Shindaiwa handheld lawn and garden equipment. The purpose of a carburetor is to mix the air and the gas before the highly combustible mixture goes to the engine. If the engine won't start and the tank is full of fresh fuel or if the engine starts and then quickly dies, the carburetor is likely the problem. Please note this high-quality metal body carburetor assembly is sold individually. Keep in mind when replacing a carburetor it is recommended to replaced the gaskets for it as well to ensure an air-tight seal.
Carburetor Assembly A021002120
OEM part for: Shindaiwa
Part Number: A021002120
$59.09
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 9 machines
Shindaiwa
22C Brushcutter View Diagrams & Manuals
61480 Trimmer View Diagrams & Manuals
81017 (4100001) Trimmer View Diagrams & Manuals
89026 Trimmer View Diagrams & Manuals
22F (Before 4100001) Trimmer View Diagrams & Manuals
22F (After 4100001) Trimmer View Diagrams & Manuals
T220 Trimmer View Diagrams & Manuals
22T Trimmer View Diagrams & Manuals
22F Grass Trimmers (F) View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Trimmer Parts
This part replaces obsolete part #: 67000-81010
Repair Videos ?
Articles:
|
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Repair
This was exactly what I needed and the repair was quick and easy.
Guest -
July 31, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Carburetor Assembly
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Have a Shindaiwa 22T. Wasn't able to pump gas into the carburetor
DAYTON - February 3, 2016
👍 8 of 9 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
1. Removed fuel lines from carburetor. Needed a needle nose plier to pull off one of them. The other came off easily.
2. Removed filter cover and filter.
3. Removed two screws holding the housing and carburetor to the block. Used a #2 Philips screw driver.
4. Remover cable from top of carburetor.
5. Discarded old carburetor.
6. Attached cable to new carburetor. Can only be installed in one orientation.
7. Reattached fuel lines.
8. Placed new carburetor to block and reinstalled Phillip head screws.
9. Reinstalled filter and cover.
10. Restarted trimmer with normal priming procedures.
11. Good as new!!!
Probably could have just replaced the priming bulb but because of this units age I decided to replace the whole carburetor. Was worried the pump would fail soon since I was using ethanol gas.
2. Removed filter cover and filter.
3. Removed two screws holding the housing and carburetor to the block. Used a #2 Philips screw driver.
4. Remover cable from top of carburetor.
5. Discarded old carburetor.
6. Attached cable to new carburetor. Can only be installed in one orientation.
7. Reattached fuel lines.
8. Placed new carburetor to block and reinstalled Phillip head screws.
9. Reinstalled filter and cover.
10. Restarted trimmer with normal priming procedures.
11. Good as new!!!
Probably could have just replaced the priming bulb but because of this units age I decided to replace the whole carburetor. Was worried the pump would fail soon since I was using ethanol gas.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
carbuetor was bad
billy - May 8, 2019
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers, Socket set
Parts Used
removed old carb,and new one was exact fit.removed fuel lines and placed new one on and was off to trimming.thanks
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Carburator plugged due to fuel sitting all winter
Donald - April 17, 2017
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Power Drill, Socket set
Parts Used
Removed air cleaner assembly
Disconnected fuel lines and throttle cable
Removed carburetor retaining screws and removed gasket
Assembled in reverse order.
Disconnected fuel lines and throttle cable
Removed carburetor retaining screws and removed gasket
Assembled in reverse order.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
