Easy
15-30 minutes
This replacement carburetor assembly is an authentic OEM supplied part that is specially produced for Shindaiwa gas powered lawn and garden equipment. It purpose is to mix gas and air into a combustible mixture before it goes in the engine. This assembly includes a metal carburetor with a rubber primer bulb and it is sold individually. Please note carburetor gaskets are sold separately. You will need a screwdriver set to complete this repair.
Carburetor Assembly A021002360
OEM part for: Shindaiwa
Part Number: A021002360
$85.35
In Stock
Order within the next 3 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 4 machines
Shindaiwa
PB270 Power Broom View Diagrams & Manuals
T270 Trimmer View Diagrams & Manuals
C270 Brushcutter View Diagrams & Manuals
C270EMC Brushcutters (C) View Diagrams & Manuals
This item works with the following types of products:
- Trimmer Parts
This part replaces obsolete part #: 70170-81020
Repair Videos ?
Articles:
|
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Great parts .
My carbarator fits well I am totally satisfied...thank you so much
Andrea Smith Polson -
April 18, 2023
Verified Purchase
Easy to order. Shipping was fast.
I had problems with the part. It resolved the issue I was having but created another one. Sorry I needed to use the equipment already, so I had to take parts from the old one to resolve the new problem I got with the new part. Although I would still patronize ereplacement parts. Love your website and the vast selection of parts you offer for many popular brands that I currently have and use.
Fritz -
August 17, 2022
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Carburetor Assembly
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Carburetor no good
Leighton - May 28, 2016
👍 5 of 5 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
1-Remove air cleaner assembly
2-Remove fuel lines
3-Remove old carb. and gasket
4- Install new gasket and carb.
5- Place fuel lines on carb.
6- install air cleaner
2-Remove fuel lines
3-Remove old carb. and gasket
4- Install new gasket and carb.
5- Place fuel lines on carb.
6- install air cleaner
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Carburetor was removed and replaced
lynn - April 28, 2019
👍 1 of 1 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver
Parts Used
Removed old carburetor and installed the new carburetor that I had bought. Perfect fit!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Carburetor needed rebuild: refused to accelerate from idle, died. Use of ethanol fuel.
Robert - June 23, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Allen head driver
Parts Used
1. Slide mounting bolts through carburetor body and mounting gasket.
2. Mount carburetor and gasket to engine and tightened mounting bolts to proper torque setting.
3. Slide throttle cable through outer carburetor?air filter housing. Attach Throttle cable.
4. Attach fuel line and fuel return line to carburetor.
5. Attach outer carburetor / air filter housing to carburetor with 2 mounting screws.
6. Attach air filter and air filter cover.
7. Fill fuel tank and go through starting procedure.
8. Start engine and warm to operating temperature. Adjust idle speed.
2. Mount carburetor and gasket to engine and tightened mounting bolts to proper torque setting.
3. Slide throttle cable through outer carburetor?air filter housing. Attach Throttle cable.
4. Attach fuel line and fuel return line to carburetor.
5. Attach outer carburetor / air filter housing to carburetor with 2 mounting screws.
6. Attach air filter and air filter cover.
7. Fill fuel tank and go through starting procedure.
8. Start engine and warm to operating temperature. Adjust idle speed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Hard to start and when started it would die out.
Shaun - December 7, 2018
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Power Drill, Wrench Set
Took off air filter ,carburetor and fuel pipe kit. Replaced with new parts. Hardest part was the fuel pipe kit. Rubber that goes into the gas tank was little bigger then the original. I had to go with my drill and make the hole a little bigger. Otherwise it was a easy fix. I had my t270 shindaiwa trimmer over 10 years and it works like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Carb was bad no air cleaner and needed filter body and cover
Benjiman - April 29, 2018
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Adjustable Wrench
I took all parts off like carb and I put them all back exact replacement parts went on really well adjusted the idle screw to old carb level cranked first pull
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The weed whacker ran bad and was very hard to start
David - June 20, 2017
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Allen wrench
Parts Used
Took off the old one, bolted on the new one. Simple, the only tricky bit was attaching the throttle cable.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Engine would run only with the choke on partially.
EVERETT - May 3, 2017
Tool Type
Trimmer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set
Parts Used
1. Drained the fuel tank
2. Removed air cleaner cover.
3. Removed air filter
4. Unbolted cover from engine and carburetor.
5.Unbolted carburetor from engine.
6.Removed carburetor gasket from engine.
7. Unscrewed throttle cable assembly from old carbuetor.
Reversed process while installing a new carburetor.
It ran perfect when finished.
2. Removed air cleaner cover.
3. Removed air filter
4. Unbolted cover from engine and carburetor.
5.Unbolted carburetor from engine.
6.Removed carburetor gasket from engine.
7. Unscrewed throttle cable assembly from old carbuetor.
Reversed process while installing a new carburetor.
It ran perfect when finished.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
