eReplacementParts.com
877-346-4814
Skil Parts
Repair Parts Home  Power Tool Parts  Skil Parts  2609120199 Carbon-Brush Set
photo thumbnailphoto thumbnail360 degree photo thumbnail
Carbon-Brush Set

Carbon-Brush Set

Part Number: 2609120199
BoschSkil
Availability: 25+ in stock
Price: $8.80
Ships within 1 business day

*This part replaces obsolete part #: and 2610968476.

Product Information
Manufacturer: Bosch, Skil
Product Number: 2609120199
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Description:
This carbon brush set is an authentic OEM sourced part, it is not an aftermarket imitation. It is commonly utilized on Bosch and Skil power tools. Over time brushes will wear away requiring replacement. This set includes (2) brush holders and (2) carbon brushes with lead wires and springs attached.

You will need a screwdriver to complete this repair.
Products Compatibility

This item works with the following types of products:

  • • Jig saw
  • • Sander
  • • Saw
Questions & Answers

WHEN THE SANDER IS TURNED ON IT THE MOTOR ISN'T RUNNING AT PEAK. IF YOU TRY TO SAND SOMETHING THE PAD WILL STOP AND THE MOTOR REALLY SLOWS DOWN. IT TAKES ABOUT A GOOD 5 MINS BEFORE IT GETS TO PEAK. COULD IT BE THE BRUSHES ARE WORN OUT?
George Jansen for model number BOSCH ROS10 PALM SANDER
Hi George and thank you for your inquiry. The brushes would be the first thing to check. If they are 1/8 of an inch or less they are worn out. Sanders, they take a lot of abuse so the inside of the motor could be filled with dust causing a short. Check the armature and field for burn marks and melted windings. If these are present then replace them. Hope this helps and good luck with your diagnostics.
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Carbon-Brush Set - 2609120199
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Needle nose pliers
Wore out brushes
I removed screws from sander housing and handle, separated and lifted the screw side of housing to expose the carbon brushes. Since the original brush holders had removable and reusable electrical wire connections, I removed the old brushes and tension springs and replaced them with the new brushes and springs. By reusing the original brush holders, I did not have to cut an wires, do any splicing, or do any soldering. The new brushes and springs fit perfectly in the original holders. I reassembled the sander housing while carefully ensuring the brushes and all electrical wires remained in place. I replaced and carefully tightened all the housing screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Jig saw
Parts Used:
Carbon-Brush Set - 2609120199
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers
The jig saw was gradually slowing down and sparking at the brushes. Eventually it came to a total halt.Upon inspection both original brushes were worn completely down.
The saw case comes apart by removing several screws and removing one half of the case. Then the brushes can be lifted out and the wires detached using a pair of needle noses pliers. Reinsert the new brushes , perfect match, and reassemble the case. Back in business!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Switch - 1607200190
Carbon-Brush Set - 2609120199
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Power Drill
Bosch Sander Wouldn't Start
Being novices at tool repairs, the hardest part of the repair was getting the sander apart completely and the wires to the brush arms were in a very tight space, getting them back in place after putting the new brush arms in so the sander would close took the most time. Taking pictures while taking the sander apart would have helped us reassemble after the repair and saved a lot of time.
The switch was the easiest part of the repair. The dust cover on the switch was worn off completely and that may be what the problem was, dust got in the switch.
We also use compressed air in a can to clean all the wood dust out which had accumulated over 8 years! The parts were good and effective and the sander runs powerfully again and really collects the wood dust. Ereplacementparts has helped us to do our own repairs and be able to use our tools a lot longer.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Jig saw
Parts Used:
Carbon-Brush Set - 2609120199
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Brushes worn out
Pulled brushes out slipped back in screwed down the cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
1 Reviews
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Parts was exactly had described
    Good price... would use this saller again
    Guest - September 26, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Bosch, Skil
    Product Number: 2609120199
    Classification: Part
    Weight: 0.01 lbs.
    Shipping: Ships Worldwide
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal

    fancyboxy