eReplacementParts.com
866-322-9842
Hitachi Parts
Repair Parts Home  Power Tool Parts  Hitachi Parts  999-074 Carbon Brush (Auto Stop Type) (1 Pair)

Carbon Brush (Auto Stop Type) (1 Pair)

Part Number: 999-074
Hitachi
Availability: 14 in stock
Price: $17.41
Quantity:
Ships within 1 business day

*This part replaces obsolete part #: and 937943Z.

Product Information
Manufacturer: Hitachi
Product Number: 999-074
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Description:
This is a genuine OEM sourced replacement part. It is commonly used on a Hitachi power tools. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. It is recommended to replace both brushes at the same time. Includes two (2) carbon brushes with lead wires and springs attached. Please note, brush holders are sold separately.

You would need a screwdriver and pliers to complete this job.

• First remove screws holding the cover together
• Separate two (2) halves of the housing to gain access to armature and brush holder
• Remove the old brush assembly
• Install the new brush assembly
• Reassemble and test your tool
Products Compatibility

This item works with the following types of products:

  • • Circular Saw
  • • Demolition Hammer
  • • Grinder
  • • Miter Saw
  • • Rotary Hammer
  • • Sander
  • • Saw
  • • Table Saw
Expand List
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Circular Saw
Parts Used:
Carbon Brush (Auto Stop Type) (1 Pair) - 999-074
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers, none
needed new brushes
removed old brushes installed new ones
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Demolition Hammer
Parts Used:
Brush Cap - 940-540
Switch (A) (1 P Screw Type) W/o Lock - 992-891
Carbon Brush (Auto Stop Type) (1 Pair) - 999-074
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Allen wrench
Intermittent power
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Carbon Brush (Auto Stop Type) (1 Pair) - 999-074
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Saw wouldn't brake. Brush springs were broken.
Opened access plugs; removed old brushes; installed new brushes; closed access plugs.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Demolition Hammer
Parts Used:
Carbon Brush (Auto Stop Type) (1 Pair) - 999-074
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Carbon brushes replaced
Remove the screws that are holding cap covers, set aside the cap covers, screws and rubber washers. Use a screwdriver to remove the brush caps. Then remove the worn brushes and install the new ones. Replace the brush caps,rubber washers and cap covers. All went well, I really recommend you to buy parts from eReplacement Parts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Carbon Brush (Auto Stop Type) (1 Pair) - ( 999-074 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: Brushes For Hitachi H90SB

1044419

Which set of brushes listed to I need or do I need both pair?
WJA
Hello 1044419,

The brushes you will want to order for your H90SB Hitachi Demo Hammer are part number 999-074. Hitachi sells these hammer all over the world. The other brush part number would most likely go to a country that uses 220 volt.

-WJA
Product Information
Manufacturer: Hitachi
Product Number: 999-074
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
eReplacementParts.com
7036 South High Tech Dr.
Midvale, UT 84047
visa mastercard discover american express PayPal

fancyboxy