eReplacementParts.com
877-346-4814
Husqvarna Parts
Repair Parts Home  Lawn Equipment Parts  Husqvarna Parts  579484202 Cable Blade Brake/Clutch Control
Cable Blade Brake/Clutch Control

Cable Blade Brake/​Clutch Control

Part Number: 579484202
Husqvarna
Availability: 15 in stock
Price: $29.06
Ships within 1 business day
Product Information
Manufacturer: Husqvarna
Product Number: 579484202
Classification: Part
Weight: 0.47 lbs.
Shipping: Ships Worldwide
Description:
This is an authentic OEM part for use with Husqvarna Lawn Mowers. The engine zone control cable stops the engine when you let go of the handle. The most common reason for replacing the cable is when the blades do not stop when the handlebar is released. This part is sold individually. The tool that you will need to replace the engine zone control cable is a socket wrench, screwdriver, scissors, snap ring and pliers.
Products Compatibility

This item works with the following types of products:

  • • Lawn Mower
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
9 of 9 people found this instruction helpful
Tool Type:
Lawn Mower
Parts Used:
Cable Blade Brake/Clutch Control - 579484202
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Pliers, Socket set, Wrench Set, Nutdriver
Clutch cable snapped
Repair requires removing the blade and the plastic deck guard. So you can access the pully connection.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Lawn Mower
Parts Used:
Cable Blade Brake/Clutch Control - 579484202
Blade 22" - 581045202
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, Allen wrench
Cable to engage the blade and the blade brake broke.
1. Removed the broken cable.
2. Removed the blade and the plastic shield around the belts.
3. Released the spring tension.
4. Ran the new cable.
5. Put it back together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Lawn Mower
Parts Used:
Cable Blade Brake/Clutch Control - 579484202
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set
Cable for Blade/clutch control broke
Removed the blade
Removed bolts and screws and cover
Removed broken cable
Installed new cable
Replaced cover and blade
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Mower
Parts Used:
Cable Blade Brake/Clutch Control - 579484202
Belt Drive - 580364604
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set, Wrench Set
Cable to blade drive broke under neath the mower deck, blade was worn out and I went ahead and replaced the belt to the wheel drive while I was at it.
Removed blade, remove plastic cover by removing 1 screw underneath the mower and 2 small screws on top of the deck. Remove another plastic cowling under the deck by removing 4 small screws, 2 under the bagging chute cover and one on each side of the mower located between mower deck and rear wheels. Remove blade hub or blade holder, pull the blade drive pulley (slid right off). Unscrewed the pulley on the transmission (that is mounted on the rear axle). This will give you slack in the drive belt and make it easier to pull the other half of the blade drive pulley, also I replaced this belt so it needed to come off anyway. Pulled the cable that engages the blade drive and installed the new one just like the old one comes off. Reinstall drive belt on pulley that is mounted to blade drive first and drive belt pulley on transmission second. Reinstall blade drive pulley, blade hub and blade. Replace covers and get after it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Lawn Mower
Parts Used:
Cable Blade Brake/Clutch Control - 579484202
Lever Assembly - 587564109
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Socket set, Wrench Set
Cable blade break cable was worn out.
1. Removed the blade.
2. Removed screws and bolt holding plastic cover over blade.
3. Removed spring and retainer holding the cable under the mower.
4. Removed from handle bar the cable, pushed out.
5. Removed the Lever Assembly by squeezing together and re-installing new one.
6. Installed the cable reversed of how it was removed.
7. Started mower and tested blade action.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
3
Average Rating (out of 5):
2 Reviews
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
1
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Exact match!
    The cable was a perfect match, only took about 5 minutes to change once the blade and dust guard were off. It wasn't my first purchase from eReplacement and it won't be my last ,my go to place for parts with great prices and near perfect parts.
    Guest - July 1, 2019 Verified Purchase
    Wrong part
    The part arrived 8 days late. That was a problem since I paid for two day shipping, and the part was the wrong part, but that was my problem, I ordered the wrong part. I had to take my mower to a local repair shop.
    Guest - 14 days ago Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Husqvarna
    Product Number: 579484202
    Classification: Part
    Weight: 0.47 lbs.
    Shipping: Ships Worldwide
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal

    fancyboxy