This is a genuine replacement part designed for use with Bosch hammer drills. This assembly secures carbon brushes around the armature. It consists of a plastic ring, two (2) metal brush holders with springs and two (2) carbon brushes.
To complete this repair your would need a screwdriver.
• First remove screws holding the housing
• Carefully separate housing to gain access to armature and brush holder
• Disconnect the wires
• Remove the screws holding brush plate
• Remove old brush holder and install the new assembly
• Reassemble and test your tool
Brush Plate 2604337061
OEM part for: Bosch
Part Number: 2604337061
Product Description ?
- Classification: Part
- Weight: 0.02 lbs.
- Shipping: Ships Worldwide
Compatibility
This part will fit the following 5 machines
Bosch
This item works with the following types of products:
- Drill Parts
- Hammer Drill Parts
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Brush Plate
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Employees over heated the hammer drill it melted one of the brush plate on one of the brushes.
Tool Type
Hammer Drill
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Tork tools
Parts Used
Try to keep as many part in one half as you can, for the others that have to be removed take pictures of where the are.
Remove the old brush plate
Install the new brush plate
Install all of the parts
Screw the housings together
I disassembled the drill and removed the assembly. Then removed the brush plate, cleaned the armature on the brush end with fine sand paper. Looked up the brush plate on line at e replacement parts.com by giving them the model no. I was real careful to watch every step to remove the parts then reinstall it in reverse from disassembly.
Drill would not run in forward, only in reverse - brush plate slightly melted around one brush
Tool Type
Hammer Drill
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Torx driver
Parts Used
2. Split case open
3. Removed spade clip from outside brush
4. Removed stator, armature, hammer device, gear train, and chuck as one assembly
5. Removed stator from above assembly
6. Removed 2 screws holding brush holder to stator
7. Removed old brush holder
8. Installed new brush holder with 2 screws
9. Released brushes with small screwdriver
10. Installed both brush wires, and re-assembled stator, armature, gear train, and chuck
11. Installed removed case half
12. Test run - success
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.