Medium
15-30 minutes
It is a genuine OEM sourced item that is specially designed for use with Dremel rotary tools. The purpose of a brush holder is to secure a carbon brush around the armature, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. This high-quality item is made of durable materials and is sold individaully, keep in mind the brush itself is sold separately.
Brush Holder 2610009853
OEM part for: Dremel, Bosch
Part Number: 2610009853
$4.99
In Stock
Order within the next 11 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 2 machines
Dremel
4000 Variable-Speeds Rotary Tool View Diagrams & Manuals
4000 (F013400001) Bare Tool 120v Usa 4000 View Diagrams & Manuals
This item works with the following types of products:
- Multi-Tool Parts
This part replaces obsolete part #: 2610009024
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 stars
1
< PREV
- 1
With OEM parts, you redeem or condemn yourself
There are too few sources to buy electronic parts not made in China which are reasonably priced.
Guest -
October 24, 2019
Verified Purchase
Easy repair
I got the brush holder that had a resister on it
Guest -
June 19, 2019
Verified Purchase
Right part, quick shipping.
Right part, received promptly.
Guest -
May 30, 2019
Verified Purchase
DID NOT WORK AS EXPECTED
I took my Dremel 4000 apart and replaced the brush bearing with the one I received from EreplacementParts, put it all back together and my Dremel did not power on like I was expecting it to. I even took it apart again to see if not put is together correctly and tried it again- NOTHING. I think I received a bunk part because that is the only thing that could be wrong with my Dremel. I'm hoping for possibly another replacement brush bearing from these guys or at least a refund...
Will update when (if) I hear back from EreplacementParts...
Jennifer -
January 15, 2023
Verified Purchase
eReplacementParts Team
Hello Jennifer, thank you for your review. We are sorry that there may be an issue with the part. If you want to call in with your model number to speak with an agent, we can assist you in resolving this issue. Have a wonderful day.
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Brush Holder
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Brush holder solder joint had broken on the brush holder. Had to take it out and replace it
Kevin - September 6, 2018
Tool Type
MultiTool
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Allen wrench
Took screws out of Dremel housing.
Separated the two sides of the housing.
Unplugged the brush holder from the motor
Plugged news brush holder in and set in correct place.
Put housing back together
Tightened housing screws
Separated the two sides of the housing.
Unplugged the brush holder from the motor
Plugged news brush holder in and set in correct place.
Put housing back together
Tightened housing screws
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Dremel could not maintain consistent speed setting
Chance - March 22, 2018
Tool Type
MultiTool
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, T15 TORX BIT
Replaced old brushes along with
Specifically
1. Remove power cord from wall
2. Unscrewed the two flathead screws securing the brushes inside
3. Pulled brushes from each side
4. Removed the 5 or 6 T15 TORX screws
5. Removed collar on drive shaft and hanging bracket from the rear
6. Took top off and notated which wires went where.
7. Removed the two brush holders and replaced with new ones
8. Reassembled and tested
Specifically
1. Remove power cord from wall
2. Unscrewed the two flathead screws securing the brushes inside
3. Pulled brushes from each side
4. Removed the 5 or 6 T15 TORX screws
5. Removed collar on drive shaft and hanging bracket from the rear
6. Took top off and notated which wires went where.
7. Removed the two brush holders and replaced with new ones
8. Reassembled and tested
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The unit locked up 10 yrs ago while cutting aluminum
wallace - September 18, 2017
Tool Type
MultiTool
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Star bit and tweezers
1. Disassembled unit
2. Wire power cord to new switch assembly
3. Attached brush holders to field
4. Attached field to switch
5. Routed wires to specific points so unit will close and run
6. Place all button and lock knobs in place.
7. Reassembled unit
(Pay Close Attention To Where The Wires Are Routed, if they are not just right the outer casing will not close cleanly and the motor will not run)
2. Wire power cord to new switch assembly
3. Attached brush holders to field
4. Attached field to switch
5. Routed wires to specific points so unit will close and run
6. Place all button and lock knobs in place.
7. Reassembled unit
(Pay Close Attention To Where The Wires Are Routed, if they are not just right the outer casing will not close cleanly and the motor will not run)
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
