Belt-Stretch 2 Pack
Part Number: H-AH20080
Leaves our warehouse within
11 - 17 business days.
11 - 17 business days.
*This part replaces obsolete part #: AH20080, H-562932001, H-38528058, 562932001, 38528058 and 38528033.
Product Information
| Manufacturer: Hoover |
| Product Number: H-AH20080 |
| Classification: Part |
| Weight: 0.01 lbs. |
| Shipping: Ships Worldwide |
Description:
| This genuine OEM supplied part is specially made for use with Hoover vacuums. The purpose of the belt is to drive the brush roller assembly. It is installed on the shaft of the motor and on the end of the brush roller. It provides an identical replacement for a missing or a faulty component that was installed on a new unit. Please make sure to check the owners manual and the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality belt is made of durable rubber and is sold individually. NOTE: We do have an article and a video on how to install this belt. Here is the link to it. How to Replace a Vacuum Belt |
Compatibility
the 69 compatible machines
This part is compatible with the following machines:
Hoover
C1703-900 WindTunnel Professional
C1705-900 WindTunnel Professional
C1712 WindTunnel Professional
CH50010 Professional Series
C1701 WindTunnel
UH70115 WindTunnel Series
UH70116 WindTunnel Series
UH70110 WindTunnel Series Rewind
UH70120 WindTunnel Series Rewind
UH70100 WindTunnel Purely Pet
UH70105 WindTunnel Purely Pet
UH70106 WindTunnel Purely Pet
UH70107 WindTunnel Purely Pet
U5140-900 Widepath Tempo Alllergen Filtration
UH30015 Widepath Tempo Alllergen Filtration
UH30030HD Widepath Tempo Alllergen Filtration
U5458-900 WindTunnel Supreme
U5458-910 WindTunnel Supreme
U5460-900 WindTunnel Supreme
U5462-900 WindTunnel Supreme
U5467-900 WindTunnel Supreme
U5470-900 WindTunnel Supreme
U5471-900 WindTunnel Supreme
U5472-900 WindTunnel Supreme
U5473-900 WindTunnel Supreme
U5481-900 WindTunnel Supreme
U5491-900 WindTunnel Supreme
U5491-950 WindTunnel Supreme
UH30070 WindTunnel Supreme
UH30085 WindTunnel Lite Bagged Upright Vacuum
U5753-900 WindTunnel Bagless
U5760-900 WindTunnel Bagless
U5786-900 WindTunnel Bagless
UH40115 WindTunnel Bagless
UH40125 WindTunnel Bagless
C1705-900 WindTunnel Professional
C1712 WindTunnel Professional
CH50010 Professional Series
C1701 WindTunnel
UH70115 WindTunnel Series
UH70116 WindTunnel Series
UH70110 WindTunnel Series Rewind
UH70120 WindTunnel Series Rewind
UH70100 WindTunnel Purely Pet
UH70105 WindTunnel Purely Pet
UH70106 WindTunnel Purely Pet
UH70107 WindTunnel Purely Pet
U5140-900 Widepath Tempo Alllergen Filtration
UH30015 Widepath Tempo Alllergen Filtration
UH30030HD Widepath Tempo Alllergen Filtration
U5458-900 WindTunnel Supreme
U5458-910 WindTunnel Supreme
U5460-900 WindTunnel Supreme
U5462-900 WindTunnel Supreme
U5467-900 WindTunnel Supreme
U5470-900 WindTunnel Supreme
U5471-900 WindTunnel Supreme
U5472-900 WindTunnel Supreme
U5473-900 WindTunnel Supreme
U5481-900 WindTunnel Supreme
U5491-900 WindTunnel Supreme
U5491-950 WindTunnel Supreme
UH30070 WindTunnel Supreme
UH30085 WindTunnel Lite Bagged Upright Vacuum
U5753-900 WindTunnel Bagless
U5760-900 WindTunnel Bagless
U5786-900 WindTunnel Bagless
UH40115 WindTunnel Bagless
UH40125 WindTunnel Bagless
U5762-900 WindTunnel Bagless
UH40020 WindTunnel Bagless
UH40065 WindTunnel Bagless
UH40145B WindTunnel Bagless
UH40265 WindTunnel Bagless
U5468-900 WindTunnel Supreme
U5396900 WindTunnel
EH51000 Wind Tunnel Bagged Upright Vacuum
UH70035B WindTunnel Cyclonic Upright Vacuum
UH70831 WindTunnel 2 Rewind Pet Bagless Upright
UH70820 WindTunnel 2 Rewind Bagless Upright
UH70816 WindTunnel High Capacity Pet Bagless Upright
UH70809 WindTunnel 2 High Capacity
UH70800 WindTunnel 2 High Capacity Bagless Upright
Uh70830 Windtunnel2 Rewind Pet
Uh70825 Windtunnel 2 Rewind Bagless
Uh70831Pc Windtunnel 2 Rewind Pet Bagless
CH53005 Task Vac Hard Bag Lightweight
CH53010 Task Vac Bagless
UH70801 WindTunnel 2 - High Capacity
UH70805 WindTunnel 2 - High Capacity
UH70810 WindTunnel 2 - High Capacity Pet
UH70811 WindTunnel 2 - High Capacity Pet
UH70815 WindTunnel 2 - High Capacity Pet
UH70819 WindTunnel 2 - High Capacity Pet
UH70821 WindTunnel 2 Rewind
UH70829 WindTunnel 2 Rewind
UH70832 WindTunnel 2 Rewind
UH70839 WindTunnel 2 Rewind
UH71003 Elite Rewind
UH71009 Elite Rewind
UH71011 Elite Rewind
UH72003 Elite Max Capacity
UH72011 Elite Max Capacity
UH40020 WindTunnel Bagless
UH40065 WindTunnel Bagless
UH40145B WindTunnel Bagless
UH40265 WindTunnel Bagless
U5468-900 WindTunnel Supreme
U5396900 WindTunnel
EH51000 Wind Tunnel Bagged Upright Vacuum
UH70035B WindTunnel Cyclonic Upright Vacuum
UH70831 WindTunnel 2 Rewind Pet Bagless Upright
UH70820 WindTunnel 2 Rewind Bagless Upright
UH70816 WindTunnel High Capacity Pet Bagless Upright
UH70809 WindTunnel 2 High Capacity
UH70800 WindTunnel 2 High Capacity Bagless Upright
Uh70830 Windtunnel2 Rewind Pet
Uh70825 Windtunnel 2 Rewind Bagless
Uh70831Pc Windtunnel 2 Rewind Pet Bagless
CH53005 Task Vac Hard Bag Lightweight
CH53010 Task Vac Bagless
UH70801 WindTunnel 2 - High Capacity
UH70805 WindTunnel 2 - High Capacity
UH70810 WindTunnel 2 - High Capacity Pet
UH70811 WindTunnel 2 - High Capacity Pet
UH70815 WindTunnel 2 - High Capacity Pet
UH70819 WindTunnel 2 - High Capacity Pet
UH70821 WindTunnel 2 Rewind
UH70829 WindTunnel 2 Rewind
UH70832 WindTunnel 2 Rewind
UH70839 WindTunnel 2 Rewind
UH71003 Elite Rewind
UH71009 Elite Rewind
UH71011 Elite Rewind
UH72003 Elite Max Capacity
UH72011 Elite Max Capacity
Products Compatibility
This item works with the following types of products:
- • Vacuum
Questions & Answers
how to replace a belt on the vacuum
Nicole
asked on 2019-11-12
Hi Nicole,
Here is a link to an article and video explaining, https://www.ereplacementparts.com/article/4999/How_to_Replace_a_Vacuum_Belt.html
Hope this helps.
imisplaced it but the number is 562289001
donna hillman
for model number uh71230
asked on 2019-09-20
Hello Donna, thank you for writing. You are looking for the Flat Non-Stretch Belt part number H-562289001. Please see the related parts below. Good luck with your repair!
I want know is the belt sapost to have teeth on one side and the brush and belt be very to put in.
Daniel
for model number Hoover Elite Rewind
asked on 2019-09-12
Hello Daniel, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
I have a Hoover Windtunnel Savvy the belt broken for the roller brush it's approximately nine inches long by a quarter inch wide, do you have this part? Thank You
dennis
for model number u8174-900
asked on 2019-08-28
Hello Dennis, thank you for inquiring. The replacement for your model is part number H-91001028. Good luck with your repair!
Dear greetings
Please, what is the diameter of the belt for this machine, thank you for your attention.
RAMON
for model number U5140-900
asked on 2018-09-27
Hi Ramon,
Thank you for your question. The length of belt should be approximately 14 inches. Where this belt is coming up under model number U5140-900, it would be the correct part for your vacuum. I hope this helps. Thank you and have a great day!
Repair Instructions: Submitted by Customers Like You
8 of 8 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Vacuum belt to rotating roller brush
Remove cover
Clean dust that built up
Place belt on spindle
Place belt on roller brush
Stretch belt enough to place roller back in position
Reattach cover
Clean dust that built up
Place belt on spindle
Place belt on roller brush
Stretch belt enough to place roller back in position
Reattach cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Vacuum
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Power Drill
Brush roll clogged with hair and wouldn't spin causing motor shaft to burn belt.
1. Removed suction hose mounting bracket. Two screws, located where the bottom of the hose connects.
2. Removed top cover. Four screws located on the top of plastic body where logo and height adjustment knobs are, respectively.
3. Removed top cover. Apply gentle rocking pressure to remove cover from rubber gasket. (Looks like a bumper.)
4. With cover off, brush roll and belt are exposed. Remove belt from motor shaft and brush roll from end brackets.
5. Slide new belt onto new brush roll. The correct side has about 1.5 inches of bare plastic with no bristles.
6. With belt on brush roll, hook belt onto motor shaft.
7. Pull brush roll forward and lock into end brackets.
Note: there should be tension on the belt and you should feel a good bit of resistance when pulling forward. The end brackets are built into the body of machine and are hexagonal. Rotate brush roll until it literally snaps into place.
8. Turn on vacuum briefly to verify brush roll spins and belt doesn't bind up.
9. Reinstall top cover.
10. Reinstall hose bracket.
2. Removed top cover. Four screws located on the top of plastic body where logo and height adjustment knobs are, respectively.
3. Removed top cover. Apply gentle rocking pressure to remove cover from rubber gasket. (Looks like a bumper.)
4. With cover off, brush roll and belt are exposed. Remove belt from motor shaft and brush roll from end brackets.
5. Slide new belt onto new brush roll. The correct side has about 1.5 inches of bare plastic with no bristles.
6. With belt on brush roll, hook belt onto motor shaft.
7. Pull brush roll forward and lock into end brackets.
Note: there should be tension on the belt and you should feel a good bit of resistance when pulling forward. The end brackets are built into the body of machine and are hexagonal. Rotate brush roll until it literally snaps into place.
8. Turn on vacuum briefly to verify brush roll spins and belt doesn't bind up.
9. Reinstall top cover.
10. Reinstall hose bracket.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Vacuum belt broke
1. Remove bottom plate of vacuum.
2. Removed old broken belt.
3. Installed new belt over the motor shaft and brush-roller.
4. Replace bottom plate of vacuum.
2. Removed old broken belt.
3. Installed new belt over the motor shaft and brush-roller.
4. Replace bottom plate of vacuum.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Worn out belt and very dirty filter.
1. Removed screws holding cover plate over drive belt.
2. Lifted up roller and removed belt.
3. Reinstalled new belt over drive motor spindle and roller brush.
4. Stretched belt and placed roller back in guides.
5. Reinstalled roller cover and inserted and tightened screws.
1. Opened filter door removed and replaced filter snd closed access door.
2. Lifted up roller and removed belt.
3. Reinstalled new belt over drive motor spindle and roller brush.
4. Stretched belt and placed roller back in guides.
5. Reinstalled roller cover and inserted and tightened screws.
1. Opened filter door removed and replaced filter snd closed access door.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The plastic component that held the roller brush in place broke and caused the roller to be misaligned and grind away other parts of the plastic base.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Broken belt
4 screws removed cover replaced belt on brush roller .
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Wheel & belt broke
Opened roller housing replaced belt. took old wheel off and slipped on new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Vacuum belt broke.
Removed the broken belt and replaced with the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Agitator brushes were worn down; light was burned out.
1. Removed bottom plate.
2. Removed old agitator assembly and belt.
3. Installed new agitator assembly and belt.
4. Reinstalled bottom plate.
5. Removed lens.
6. Removed old light bulb and installed new one.
7. Reinstalled lens.
2. Removed old agitator assembly and belt.
3. Installed new agitator assembly and belt.
4. Reinstalled bottom plate.
5. Removed lens.
6. Removed old light bulb and installed new one.
7. Reinstalled lens.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Right pin was broken off on the wheel assembly and belt was worn.
1. Remove the belt/brush cover
2. Replace the belt.
3. The pivot front wheel support assembly so flattened edges of pins slip into housing and rotate down into normal position.
2. Replace the belt.
3. The pivot front wheel support assembly so flattened edges of pins slip into housing and rotate down into normal position.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
2 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Easy Repair
The belt fit perfectly and we are vacuumning agsain
Salva -
December 3, 2019
Verified Purchase
Vacuum cleaner belt.
The vacuum cleaner belt was the right fit, it arrived promptly. Thank you. Looking 4ward to doing business in the
future.
Roque -
October 4, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information
| Manufacturer: Hoover |
| Product Number: H-AH20080 |
| Classification: Part |
| Weight: 0.01 lbs. |
| Shipping: Ships Worldwide |
