Easy
Less than 15 minutes
This is an authentic replacement part manufactured for use with Porter Cable hand planers. The belt is used to drive the blade drum assembly. It is recommended to clean the pulleys when replacing the belt to ensure a proper fit to prevent damage to the belt. This belt is sold as an individual replacement part, please see model diagram for associative parts.
Belt 5140101-92
OEM part for: Porter Cable, DeWALT, Black and Decker
Part Number: 5140101-92
$5.96
In Stock
Ships within 1 business day 
Compatibility
This part will fit the following 18 machines
Porter Cable
PC60THPK 6.0 Amp Hand Planer View Diagrams & Manuals
CE650-B2 (Type 1) 650w Hand Planer W/Kit Bo View Diagrams & Manuals
CE750-B2C (Type 1) 700w Hand Planer - Interc View Diagrams & Manuals
PC60THP (Type 1) 6.0 Amp Hand Planer Power Tool View Diagrams & Manuals
PC60THPK (Type 1) 6.0 Amp Hand Planer Kit Power Tool View Diagrams & Manuals
DeWALT
CE650-B2C (Type 1) 650w Hand Planer W/Kit Bo View Diagrams & Manuals
CE650-B3 (Type 1) 650w Hand Planer W/Kit Bo View Diagrams & Manuals
CE750-B2 (Type 1) 700w Hand Planer - Interc View Diagrams & Manuals
Black and Decker
CE750-B3 (Type 1) 700w Hand Planer - Interc View Diagrams & Manuals
CE650-AR (Type 1) 650w Hand Planer W/Kit Bo Power Tool View Diagrams & Manuals
CE650-B2 (Type 1) 650w Hand Planer W/Kit Bo Power Tool View Diagrams & Manuals
CE650-B2C (Type 1) 650w Hand Planer W/Kit Bo Power Tool View Diagrams & Manuals
CE650-B3 (Type 1) 650w Hand Planer W/Kit Bo Power Tool View Diagrams & Manuals
CE650-BR (Type 1) 650w Hand Planer W/Kit Bo Power Tool View Diagrams & Manuals
CE750-AR (Type 1) 700w Hand Planer - Interc Power Tool View Diagrams & Manuals
CE750-B2 (Type 1) 700w Hand Planer - Interc Power Tool View Diagrams & Manuals
CE750-B2C (Type 1) 700w Hand Planer - Interc Power Tool View Diagrams & Manuals
CE750-BR (Type 1) 700w Hand Planer - Interc Power Tool View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Planer Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Belt
Drive belt. For table saw 2 inches wide approx 13 3/4 inches long. How can I get a new one ? Bought it in 2011 from Lowes .. catalog # PCB270TS. 10 INCH STATIONARY table saw
Roger
for model number 2x1q
asked on 2022-03-08
Hello Roger, thank you for your question. We have researched the model you have provided, and we would suggest the Drive Belt, part number 5140085-55. If you need help placing an order, our customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team March 08, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
a drive belt broke.
Ron - September 25, 2020
Tool Type
Planer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, I didn\\\'t use any tools. Just rolled it on the two wheels.
Parts Used
1. pulled the side plate (cover on the drives)- you need a cross point screw driver.
2. pull the old belt off.
3. cleaned the rubber out of the blade drive wheels.
4. Took the new one, place it on the upper drive
5. Place the other end, on the lip of the lower drive.
6. slowly turned the upper wheel, pushed on the lower during the turning. It took to the lower wheel threading itself until fitting properly.
7. reinstalled the side plate.
8. planed a piece of would to make sure it worked correctly.
2. pull the old belt off.
3. cleaned the rubber out of the blade drive wheels.
4. Took the new one, place it on the upper drive
5. Place the other end, on the lip of the lower drive.
6. slowly turned the upper wheel, pushed on the lower during the turning. It took to the lower wheel threading itself until fitting properly.
7. reinstalled the side plate.
8. planed a piece of would to make sure it worked correctly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
