Easy
15-30 minutes
This is an authentic Dremel part that has been sourced from the original manufacturer to be used with scroll saws. The rubber bellows are used to blow air through the air tube to remove sawdust from the cutting area. This item is available as an individual replacement part.
Bellows 2615302998
OEM part for: Dremel, Bosch
Part Number: 2615302998
$4.99
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Compatibility
This item works with the following types of products:
- Saw Parts
- Scroll Saw Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
13
4 stars
1
3 stars
0
2 stars
0
1 stars
1
< PREV
- 1
- 2
Worked out Great!
The part was exact to the original. Install was easy. Did take a little longer to get the part due to the way shipping is now but it arrived, and I installed the part, so everything is good.
Eddie -
February 3, 2022
Verified Purchase
Made my scroll saw like new again
Such a small thing that makes cutting intricate pieces easier and safer. Thank you for stocking all the little pieces for our equipment!
Guest -
October 19, 2021
Verified Purchase
easy and quick fix.
scroll saw sat to long and when I went to use it the blower was inoperative. the bellows had disintegrated.I searched on line and located this wonderful parts replacement site. they actually had it and the price was reasonable so I bought it . they sent it very fast. I installed it in the saw and completed my task.
thank you for the quick and easy fix.
Frank -
September 16, 2021
Verified Purchase
The right part
I ordered a bellows for my Dremel Scroll Saw. It was not available locally. You had the right part and great website. Now my saw is back in proper use.
Guest -
January 18, 2021
Verified Purchase
Great all the way around
easy to order, received part quickly, part was as described and fit perfectly!
Guest -
June 5, 2020
Verified Purchase
Great hard to find item...Great communication and overall order experience!
I used this bellows in a non-traditional application. My jetted tub's air switch had failed. The bellows was the perfect size to fit in the button once I cut down the length of the button to enable the right amount of air pressure to activate the on/off switch on the pump. This method is actually better than the spring-based original air switch which kept getting stuck!
Guest -
May 23, 2020
Verified Purchase
Bellows was what we needed
I ordered this for a friend.With the exception of a mounting hole,it was what we wanted.we mounted it and it works great.Good product,good price,good service.What more can I say except keep it up.
Guest -
February 28, 2020
Verified Purchase
Always on
The part arrived in the time that they suggested and was exactly as it was list on their web site. I have been purchasing parts from eReplacement, and have always been pleased. It has become my first go to site for parts.
Guest -
December 26, 2019
Verified Purchase
One new bellows =one almost new saw
I waited years to replace the bellows instead blowing dust off of the scroll saw table. One pleasant phone call and my old saw is good as new. I got the right part, at a decent price, just as needed.
Guest -
December 9, 2019
Verified Purchase
Bellows Part Number: 2615302998
Bought this for my scroll saw and it fits perfect.
Guest -
November 27, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Bellows
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Brought a used scroll saw had missing parts and a broken bellow
Larry - May 1, 2017
👍 5 of 5 people found this instruction helpful
Tool Type
Scroll Saw
Difficulty
Hard
Time
More than 2 hours
Tools Used
Screwdriver, Power Drill
I had one screw that would not turn so I drilled it out, removed the rest of the screws and pried the upper arm assembly apart enough to remove the assembly that held the bellow, two screws, placed the new bellows on it and reassembled by replacing all the rest of the screws. The other parts were straight forward. Was happy to have received
the light bulb with the light assembly
the light bulb with the light assembly
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Old bellows worn out, brittle and leaking.
David - October 9, 2016
👍 3 of 3 people found this instruction helpful
Tool Type
Scroll Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Remove two screws, pull old bellows off and replace new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
No air from the dust hose.
Sioban - April 23, 2016
👍 2 of 2 people found this instruction helpful
Tool Type
Scroll Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Remove the two screws holding the cover on the top arm, remove the jointed air tube(screws out) lift the cover out with the old bellows, or whats left of it. Peel off the old remaining portion of the original bellows. Replace with the new bellows and put back the way you took it out.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bellows was rotten and Air Hose broken
JuanCarlos - June 3, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Scroll Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Remove the defective parts and install the new ones. That simple
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Unable to blow dust off project
Dean - February 15, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Scroll Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Adjustable Wrench, Thin paint scraper; thick super glue
Parts Used
1. Removed the bellows cover with a phillips screwdriver; removed the old bellows, using thin scraper to ensure total removal from the arm. Installed the bellows on the cover & used thick super glue to secure the bellows to the arm. Secured the cover to the frame, using the phillips screws. Pushed the air hose to the nipple inside the dust cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The old bellows was dry and cracked after years of use.
Wayne - January 15, 2021
Tool Type
Scroll Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Allen wrench
Parts Used
I had to basically dis-assemble my scroll saw in order to gain access to the bellows. The job wasn’t as difficult as it may sound. I had to remove the screws that connect the two halves of the case and separate the case. I also had to remove the table, once that was completed, I had access to the bellows. After replacing the bellows, I just had to re-assemble the case and re-install the table. While I had the saw dis-assembled it gave me the opportunity to clean it throughly after years of use.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Rubber on old aged bellows cracked and rotted making it unuseable
Thomas - January 15, 2021
Tool Type
Scroll Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Razor blade knife, epoxy glue, o-ring tool
Parts Used
1. Removed old bellows by removing two screws on top of saw. Remove the plastic piece and old bellows that was attached. Also removed the tube from the plastic piece. Cleaned the place where the bellows attaches to the saw. Cut a small portion of the tube to make connection with the plastic piece tighter.
2 Used o-ring tool to attach the new bellows to the plastic piece. Applied glue to the saw. put the bellows and piece of plastic in place an secure with two screws. Attach plastic tube. Waited overnight for the glue to set.
2 Used o-ring tool to attach the new bellows to the plastic piece. Applied glue to the saw. put the bellows and piece of plastic in place an secure with two screws. Attach plastic tube. Waited overnight for the glue to set.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Not blowing away sawdust
Randal - November 27, 2020
Tool Type
Scroll Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, None
Parts Used
Removed old bellows installed new, by removing hose, loosening 2 screws and removing plate bellows is attached to.The hardest part of this repair was that I had to purchase a bellows for a delta brand saw as a replacement was not listed for my tradesman saw. The part fit perfectly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bellows rotten
Don - October 4, 2020
Tool Type
Scroll Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Power Drill, Socket set
Parts Used
Removed saw from stand split it apart put in new one back together
Did you find this story helpful?
Thanks for voting and helping fellow customers!
worn out
LeRoy - February 28, 2020
Tool Type
Scroll Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Nutdriver
Parts Used
Removed old part.cleaned mounting area,installed new part.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
