Easy
Less than 15 minutes
This is a an used on Shimano reels. This part is made out of metal and it is sold individually. This is the bearing for the bail arm line roller. There are two (2) of these bearing on each side of line roller. It is advised to replace them both at the same time. Ball bearings are designed to reduce friction between rotating parts. Bearings experience constant wear from pressure, heat, vibration and friction eventually requiring replacement.
To complete this repair you would need a flat-head screwdriver
• First you would need to remove screw from the bail arm
• Then separate arm, washers and line roller
• Remove old bearings and secure new ones in place
• Re-assemble the reel
Ball Bearing 1182965
OEM part for: Penn
Part Number: 1182965
$13.22
In Stock
Order within the next 5 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 8 machines
Penn
420SSG Spinfisher SS Graphite Spinning Reel View Diagrams & Manuals
430SSG Spinfisher SS Graphite Spinning Reel View Diagrams & Manuals
440SSG Spinfisher SS Graphite Spinning Reel View Diagrams & Manuals
450SSG Spinfisher SS Graphite Spinning Reel View Diagrams & Manuals
550SSG Spinfisher SS Graphite Spinning Reel View Diagrams & Manuals
650SSM Spinfisher SS Metal Spinning Reel View Diagrams & Manuals
750SSM Spinfisher SS Metal Spinning Reel View Diagrams & Manuals
850SSM Spinfisher SS Metal Spinning Reel View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Reel Parts
This part replaces obsolete part #: 035A8500J
Customer Part Reviews ?
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Ball Bearing
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The bail on my Penn reel came loose on one end. A screw had come loose and fell out along with the line roller and other accessories making the reel useless.
Rod - November 26, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Reel
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Went online to find a source for my model Penn reel parts.
The product assembly diagram provided online was a little blurred and hard to read, but I was able to correctly identify the correct part numbers needed.
Bought the parts which were promptly shipped.
Assembling the bail mechanism was fairly easy from the assembly drawing.
The product assembly diagram provided online was a little blurred and hard to read, but I was able to correctly identify the correct part numbers needed.
Bought the parts which were promptly shipped.
Assembling the bail mechanism was fairly easy from the assembly drawing.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Screw somehow came out and fell apart
Jimmie - June 7, 2017
Tool Type
Reel
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
I just had to put the parts back together
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Screw came out of bail roller assy---lost roller - bearings and washer overboard in 40ft salt water.
Glen - February 10, 2017
Tool Type
Reel
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Fortunately the screw was found on boat floor---I reassembled the reel followed the diagram that came with it.
A simple repair. Note--It pays to keep all diagrams/parts descriptions of your reels.
A simple repair. Note--It pays to keep all diagrams/parts descriptions of your reels.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Fell apart while fishing
Ray - September 2, 2016
Tool Type
Reel
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Looked at the parts diagram and installed parts & tightened screw
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
