*This part replaces obsolete part #: and 211093-4.
Product Information
Manufacturer: Makita |
Product Number: 211087-9 |
Classification: Part |
Weight: 0.07 lbs. |
Shipping: Ships Worldwide |
Description:
This authentic replacement ball bearing which is supplied by the original manufacturer, it is specially designed for use with Makita power tools. Ball bearings are used to reduce friction between rotating parts, they experience constant wear from pressure, heat, vibration, and friction eventually requiring replacement to maintain peak performance. It is generally used as one of the armature bearings, for correct application make sure to check appropriate diagrams of your model. This part is made of high-quality metal and it is sold individually. |
Compatibility
the 41 compatible machines
This part is compatible with the following machines:
Makita
JR3000V 6 Amp Variable Speed Reciprocating Saw
9627 Grinder
406 Vacuum
9029 Grinder
9049 Grinder
9069 Angle Grinder
9401 Belt Sander
9900B Belt Sander
9924DB Belt Sander
HM1303 Demolition Hammer
HM1303B Demolition Hammer
HR5000 Rotary Hammer
9067L Angle Grinder
9514B Disc Grinder
HM1211B Demolition Hammer
HR3851 Rotary Hammer
410 Dust Collector
9040L Angle Sander
2030S Jointer
9060L Angle Sander
2012NB Planer
9627 Grinder
406 Vacuum
9029 Grinder
9049 Grinder
9069 Angle Grinder
9401 Belt Sander
9900B Belt Sander
9924DB Belt Sander
HM1303 Demolition Hammer
HM1303B Demolition Hammer
HR5000 Rotary Hammer
9067L Angle Grinder
9514B Disc Grinder
HM1211B Demolition Hammer
HR3851 Rotary Hammer
410 Dust Collector
9040L Angle Sander
2030S Jointer
9060L Angle Sander
2012NB Planer
9077SL Angle Grinder
BO3700 Finishing Sander
JR3000VT Reciprocating Saw
JR3000VT Reciprocating Saw
9047L Angle Grinder
HM1211 Demolition Hammer
BO5001 Random Orbit Sander
HM1304B Demolition Hammer
4112H Angle Cutter
BO5000 Sander
4114 Angle Cutter
GA7021 Angle Grinder
GA7020 Angle Grinder
GA9020 Angle Grinder
GA7040S Angle Grinder
GA9040S 9" 15A Soft-Start Technology Angle Grinder
KP0810 7.5A 16000RPM 3-1/4" Planer
BO3710 Finishing Sander
HM1201 Demolition Hammer
EC-1235 14-Inch Angle Cutter
BO3700 Finishing Sander
JR3000VT Reciprocating Saw
JR3000VT Reciprocating Saw
9047L Angle Grinder
HM1211 Demolition Hammer
BO5001 Random Orbit Sander
HM1304B Demolition Hammer
4112H Angle Cutter
BO5000 Sander
4114 Angle Cutter
GA7021 Angle Grinder
GA7020 Angle Grinder
GA9020 Angle Grinder
GA7040S Angle Grinder
GA9040S 9" 15A Soft-Start Technology Angle Grinder
KP0810 7.5A 16000RPM 3-1/4" Planer
BO3710 Finishing Sander
HM1201 Demolition Hammer
EC-1235 14-Inch Angle Cutter
Products Compatibility
Questions & Answers
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Miter Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, hammer and vise, help to hold handle where bearing was
bearing went bad
repaired a reciprocating saw (not listed in machine info)
replaced the bearing, snap ring and replaced the screws on the plate that held in the bearing
replaced the bearing, snap ring and replaced the screws on the plate that held in the bearing
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, bearing/gear puller
bearings and brushes shot
disassembled the belt sander
removed old bearings
installed new ones
reassembled
tested
removed old bearings
installed new ones
reassembled
tested
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Repair Difficulty:
Expert
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Socket set, Adjustable Wrench, Metric allen wrench, bearing puller
Bearings were seized
1. Disassemble entire electrical housing.
2. Use bearing puller to remove one bearing and chisel for the other.
3. Bearing with fan beneath it becomes sacrificial to remove. Part number 241809-3 is not a direct replacement for the 9900B belt sander. The original fan was pressed in place with a larger pressed on fitting. The large OEM fitting must be removed to press this replacement fan on, but after removed it does fit perfect.
4. Replace bearings and reassemble.
2. Use bearing puller to remove one bearing and chisel for the other.
3. Bearing with fan beneath it becomes sacrificial to remove. Part number 241809-3 is not a direct replacement for the 9900B belt sander. The original fan was pressed in place with a larger pressed on fitting. The large OEM fitting must be removed to press this replacement fan on, but after removed it does fit perfect.
4. Replace bearings and reassemble.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
Manufacturer: Makita |
Product Number: 211087-9 |
Classification: Part |
Weight: 0.07 lbs. |
Shipping: Ships Worldwide |
Related Products