Medium
30-60 minutes
It is an authentic manufacturer-supplied part which is specially designed for Mr. Heater and Heatstar kerosene forced air heaters. The tube allows the air to travel from the pump. Over time the material may wear out and begin to crack eventually requiring a replacement. Note, this high-quality part is made of durable rubber and is sold as an individual component. To ensure the proper replacement procedure, refer to the appropriate diagram of your specific model.
Air Tube 24345
OEM part for: Heatstar, Mr. Heater
Part Number: 24345
$7.15
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 9 machines
Heatstar
HS125KT Kerosene Forced Air Heater View Diagrams & Manuals
HS210KT Kerosene Forced Air Heater View Diagrams & Manuals
HS175KT Kerosene Forced Air Heater View Diagrams & Manuals
Mr. Heater
MH125KTR Kerosene Forced-Air Heater View Diagrams & Manuals
MH175KTR Kerosene Forced-Air Heater View Diagrams & Manuals
MH210KTR Kerosene Forced-Air Heater View Diagrams & Manuals
TS125KT Kerosene Forced-Air Heater View Diagrams & Manuals
TS175KT Kerosene Forced-Air Heater View Diagrams & Manuals
TS210KT Kerosene Forced-Air Heater View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Heater Parts
Customer Part Reviews ?
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Air Tube
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Parts ran to failure
greg - February 27, 2020
Tool Type
Heater
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, Wrench Set
torn down the housing
unscrewed mounting bolts..
replaced parts
button up housing.
unscrewed mounting bolts..
replaced parts
button up housing.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Hoses was old and cracked
Ricky - December 23, 2019
Tool Type
Heater
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Removed the screws holding the top cover on and removed the cover to access the hoses. Very easy job.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Heater was not putting out heat it was just throwing Flames
Rex - October 25, 2018
Tool Type
Heater
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
1. Changed all the air lines as they were cracked from age.
2. Changed the fuel line as it also was cracked with age.
3.Changed the filter because it needed it.
4. Changed the Electrode Assembly because it was cheap.
5. Machine works great with all the new parts. Should last another 10 years
2. Changed the fuel line as it also was cracked with age.
3.Changed the filter because it needed it.
4. Changed the Electrode Assembly because it was cheap.
5. Machine works great with all the new parts. Should last another 10 years
Did you find this story helpful?
Thanks for voting and helping fellow customers!
I had to order new fuel hoses for my heater after one year of ownership. I had not burned 5 gal. of fuel and the hoses were cracked that the heater would not start. I think I will report the incident
Brian - November 26, 2017
Tool Type
Heater
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Nutdriver
Parts Used
To find my problem I was on the phone with Mr Heater employees three different times and they couldn't help me. I finally discovered the problem after I took of the hood and looked at the hoses. The hose to the motor was cracked on the end so I cut that part off and reattached it so I figured that because I had fuel dripping off of my heater I must have a crack in the fuel line also. I removed that hose also and found that it was cracked on the back side of the hose and that it was pumping fuel onto the machine instead of it going to the burner. I cut off that end of the hose and reattached it and turned on the heater and it ignited instantly. I then turned off the heater and wiped down the heater because of the fuel that was dripping off of the heater and dried it down. After removing all the fuel that was on the outside of the heater I then restarted the heater and it works fine now.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
