eReplacementParts.com
877-346-4815
Ryobi Parts
Repair Parts Home  Lawn Equipment Parts  Ryobi Parts  831-0823A Throttle Box Ass Y

Install
Videos!
Throttle Box Ass Y - 831-0823A:Ryobi 360 View
Throttle Box Ass Y - 831-0823A:RyobiThrottle Box Ass Y - 831-0823A:RyobiThrottle Box Ass Y - 831-0823A:Ryobi 360 View

Throttle Box Ass Y 831-0823A

Part Number: 831-0823A
RyobiMTDYard MachinesYard ManTroy-BiltCub CadetHusky
Availability: In Stock
Price: $32.78
Order within the next 11 hours
and your part ships today!

*This part replaces obsolete part #: 831-0798 and 831-0823.

Product Information
Description:
This throttle box ass\\\'y is an OEM direct from the Ryobi manufacturer. This item is constructed of plastic and metal parts, and is compatible with many tiller devices. The throttle box assembly is fastened onto the r.h. upper handle. Please refer to specific manual and diagrams for repair instructions. This part is sold individually. A screwdriver is needed in the replacement.
Frequently Purchased With
Compatibility

This part is compatible with the following machines:

Ryobi
MTD
21430C (1986) Tiller
216-412-000 (1986) Tiller
216-420-000 (1986) Tiller
216-430-000 (1986) Tiller
21430-7 (1987) Tiller
217-031-000 (1987) Tiller
217-310-000 (1987) Tiller
217-412-000 (1987) Tiller
217-420-000 (1987) Tiller
217-430-000 (1987) Tiller
310-014 (1987) Tiller
310-032 (1987) Tiller
310-040 (1987) Tiller
310-059 (1987) Tiller
310-062 (1987) Tiller
310-064 (1987) Tiller
381-062 (1987) Tiller
412-036 (1987) Tiller
412-192 (1987) Tiller
430-050 (1987) Tiller
217-031-192 (1987) Tiller
217-031-331 (1987) Tiller
217-310-032/223-8733-00 (1987) Tiller
217-310-081 (1987) Tiller
217-310-084 (1987) Tiller
217-310-087 (1987) Tiller
217-310-111 (1987) Tiller
217-310-120 (1987) Tiller
217-310-305 (1987) Tiller
217-310-327 (1987) Tiller
217-310-331 (1987) Tiller
0434/850-0035 (1988) Tiller
21430-8 (1988) Tiller
218-310-000 (1988) Tiller
218-385-000 (1988) Tiller
218-402-000 (1988) Tiller
218-404-000 (1988) Tiller
218-405-000 (1988) Tiller
218-430-000 (1988) Tiller
310-009 (1988) Tiller
310-014 (1988) Tiller
310-023 (1988) Tiller
310-032 (1988) Tiller
310-046 (1988) Tiller
310-059 (1988) Tiller
310-064 (1988) Tiller
310-087 (1988) Tiller
310-102 (1988) Tiller
310-127 (1988) Tiller
405-009 (1988) Tiller
405-023 (1988) Tiller
405-032 (1988) Tiller
405-064 (1988) Tiller
405-087 (1988) Tiller
430-015 (1988) Tiller
218-310-034/223-8833-00 (1988) Tiller
218-310-054/481-4026 (1988) Tiller
218-310-062/95208 (1988) Tiller
218-310-192 (1988) Tiller
218-310-327 (1988) Tiller
218-405-118/SWC#28714 (1988) Tiller
218-405-192 (1988) Tiller
218-405-206 (1988) Tiller
318-405-327 (1988) Tiller
0434A/850-0035 (1989) Tiller
21430-9 (1989) Tiller
21700-9 (1989) Tiller
219-310-000 (1989) Tiller
219-310-009 (1989) Tiller
219-310-014 (1989) Tiller
219-310-016 (1989) Tiller
219-320-000 (1989) Tiller
219-355-000 (1989) Tiller
219-381-000 (1989) Tiller
219-381-009 (1989) Tiller
219-381-084 (1989) Tiller
219-385-000 (1989) Tiller
219-405-000 (1989) Tiller
219-405-009 (1989) Tiller
219-405-013 (1989) Tiller
219-405-084 (1989) Tiller
219-406-000 (1989) Tiller
219-406-016 (1989) Tiller
219-430-000 (1989) Tiller
8852/850-2957 (1989) Tiller
310-192 (1989) Tiller
310-206 (1989) Tiller
310-327 (1989) Tiller
381-192 (1989) Tiller
381-206 (1989) Tiller
381-305 (1989) Tiller
381-327 (1989) Tiller
405-192 (1989) Tiller
405-206 (1989) Tiller
405-327 (1989) Tiller
406-192 (1989) Tiller
430-206 (1989) Tiller
430-327 (1989) Tiller
129-366B023 (1989) Tiller
219-031-034/223-8933-00 (1989) Tiller
219-310-023 (1989) Tiller
219-310-031/B063-089 (1989) Tiller
219-310-032 (1989) Tiller
219-310-046 (1989) Tiller
219-310-055/481-4026 (1989) Tiller
219-310-059 (1989) Tiller
219-381-169/60944 (1989) Tiller
219-381-170/60944 (1989) Tiller
219-405-023 (1989) Tiller
219-406-034/223-8934-00 (1989) Tiller
219-406-105 (1989) Tiller
219-406-118/SWC28714 (1989) Tiller
219-430-031/2832-475 (1989) Tiller
219-430-032 (1989) Tiller
210-310-000 (1990) Tiller
210-310-014 (1990) Tiller
210-320-000 (1990) Tiller
210-381-000 (1990) Tiller
210-381-014 (1990) Tiller
210-405-000 (1990) Tiller
210-405-013 (1990) Tiller
210-406-000 (1990) Tiller
210-430-000 (1990) Tiller
210430 (1990) Tiller
210700 (1990) Tiller
310-009 (1990) (1990) Tiller
310-046 (1990) Tiller
381-009 (1990) (1990) Tiller
405-009 (1990) Tiller
405-046 (1990) (1990) Tiller
430-046 (1990) Tiller
210-310-032 (1990) Tiller
210-310-034/2239015-00 (1990) Tiller
210-310-054/481-4026 (1990) Tiller
210-310-059 (1990) Tiller
210-310-083 (1990) Tiller
210-310-087 (1990) Tiller
210-310-092 (1990) Tiller
210-310-105/23832 (1990) Tiller
210-310-137 (1990) Tiller
210-310-138 (1990) Tiller
210-310-146 (1990) Tiller
210-310-192 (1990) Tiller
210-310-206 (1990) Tiller
210-310-327 (1990) Tiller
210-381-031/2835-958 (1990) Tiller
210-381-047 (1990) Tiller
210-381-054/481-4059 (1990) Tiller
210-381-084/936435 (1990) Tiller
Expand the 150+ compatible machines
Products Compatibility

This item works with the following types of products:

  • • Lawn Tractor

Questions & Answers for Throttle Box Ass Y


No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Cultivator
Parts Used:
Throttle Box Ass Y - 831-0823A
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Nutdriver
Plastic throttle broke
Worst part was getting old one out. Had to break it apart to get cable out. Then get it all lined up and use pliers to get pins together. Part arrived quick and was much better than part that came on the tiller. I bought it about 35 years ago so I was amazed to be able to get the part I needed. Thanks
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 5 people found this instruction helpful
Tool Type:
Lawn Tractor
Parts Used:
Throttle Box Ass Y - 831-0823A
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers
Throttle handle broken
Removed the old throttle box from the handle
Removed the throttle cable from the throttle handle
Installed the cable to the new handle
Placed the washers in the new throttle box with the handle and cable
Installed the new box on the handle


Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Tractor
Parts Used:
Throttle Box Ass Y - 831-0823A
Bearing-flange - 741-0487C
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers, Socket set, Small hammer
Throttle was broke off of dash. And bushing was totally gone from front wheel.
1. Use a floor jack to raise front of tractor.
2. Pull plastic cap off. Use pliers to remove carter key from axle. Wheel should slip off. If not
turn wheel & tap with hammer to remove.
3. Replace bushing in wheel and clean axle with wire brush. Little grease here wouldn't hurt.
4. Slide wheel with new bushing back onto axle. Replace carter key and cap.
1. Throttle body is two bolts/ screws . Remove screws ,hook old cable into hole of handle. Put
sides back together replace screws.
2 Stick cable though dash till housing snaps into dash. Mine had a screw to mount housing to
dash.
3. Hook wire/cable into linkage and replace set screw to hold cable in place.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Cultivator
Parts Used:
Throttle Box Ass Y - 831-0823A
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Rototiller throttle lever was broken
Removed screw holding throttle box , popped it up and out. Removed two screws holding box together. Separated box halves unhooked cable. Then reversed the steps.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Cultivator
Parts Used:
Throttle Box Ass Y - 831-0823A
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Throttle handle was broken.
1. Reconnected the throttle wire to the handle.
2. Assembled the two halves.
3. Snapped into place.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4.7
Average Rating (out of 5):
10 Reviews
Click to filter by ratings:
5 stars
8
4 stars
1
3 stars
1
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Worked Great
    Received the part within a few days of ordering. Part was as described and works great.
    Guest - June 22, 2022 Verified Purchase
    Easy ordering
    It was easy to identify the part I needed from the parts diagram. I was a little concerned I wouldn't be able to find the part I needed since the tiller is so old. No problems at all. Shipped out quickly and good communication on tracking the status.
    Guest - March 30, 2021 Verified Purchase
    Throttle bracket
    Good quality, easily installed, would recommend
    Don - May 20, 2020 Verified Purchase
    easy repair
    the covid 19 virus interfered slightly with delivery but everything was as expected and my roto tiller is back in working order thank you
    Guest - April 16, 2020 Verified Purchase
    No qualms
    I received the parts they were all correct and in a timely manner I will use the site again maybe a tad bit more than I wanted to pay but I can't complain everything was correct and no problem with the parts
    Guest - January 30, 2020 Verified Purchase
    Just what I needed
    Arrived on time
    Guest - July 1, 2019 Verified Purchase
    Easy reapair
    better than original part
    Kerry - June 3, 2019 Verified Purchase
    throttle control knob
    Perfect fit. Better than the original by a long shot.
    Guest - May 15, 2019 Verified Purchase
    Good quality
    Only wish that there were instructions with it. There seems to be maybe a part not included
    Guest - April 4, 2023 Verified Purchase
    Bad shipping
    Hopefully the parts will work! I have installed them waiting for the rain to go away to see if it works! What upset me about this order was the shipping! I was sent an email saying it shipped I looked at the shipping info and it didn’t show shipped but your site did! I made at least 3 calls over a few days to try and find out about the order and was basically given the run around!! Finally on the day it showed it was going to be delivered to me I called again and that person said I had to wait like 5 days and call if I hadn’t received my order! Interestingly after I gave him my opinion / frustration of the issue and after we hung up I received an email that my items were on the way! Imagine that! Ridiculous!
    Carol - March 28, 2020 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal